行波管放大器相位噪声的分析及其抑制

主要分析规则调相信号对行波管放大器频谱纯度的影响,并且根据行波管放大器相位噪声产生的过程和原因,提出两种抑制相位噪声的方法.     

横向各向同性介质中的初至波旅行时计算

本文直接采用Thomsen导出的横向各向同性介质中的相速度、群角与相角、群速度与相速度的精确函数关系,提出了一种新的具有任意各向异性强度的横向各向同性介质中的初至波旅行时计算方法,它不同于Faria等人给出的采用群速度近似公式(Byun)的仅适应弱各向异性的初至波旅行时计算方法。该新算法在计算具有任意各向异性强度的横向各向同性介质中的初至波旅行时时,并不显著地增大计算时间。分析对比由新算法得到的初至波旅行时的等值线图和由交错网格有限差分波场模拟得到的波场快照表明,无论是对弱各向异性还是对强弱各向异性,新算法都具有较高的精度;随着各向异性强度的增大,新算法的计算结果与采用近似公式计算结果的差值也随之增大。     

星上多载波解调技术研究

新一代具有星上处理的卫星将急剧降低地球站的复杂度,星上多载波解调(MCD)技术就是在星上分离出各个信道然后再独立解调。研究了星上多路信号即FDMA/QPSK信号的多载波技术,这是一种重要的星上处理技术,它包括频分多路信号的FFT分路算法、频偏估计、多路QPSK信号的全数字化解调算法和解调算法中的位定时恢复方法等。对主要的关键技术进行了计算机仿真。     

抗窄带干扰宽带中频数字接收机的设计与实现

讨论了存在强干扰条件下MSK中频数字接收机的频域窄带干扰抑制、伪码快速捕获、MSK相干解调等实现方法。具体实现中提出了基于功率估计的码捕获门限实时调整方案，解决了动态干扰条件下的快速码捕获问题。基于FPGA DSP硬件设计和软件可编程数字信号处理算法，接收机具有较强的适应性和稳定性。     

On strategies for enforcing interfacial constraints and evaluating jump conditions with the extended finite element method

We consider a problem stemming from recent models of phase transitions in stimulus‐responsive hydrogels, wherein a sharp interface separates swelled and collapsed phases. Extended finite element methods that approximate the local solution with an enriched basis such that the mesh need not explicitly ‘fit’ the interface geometry are emphasized. Attention is focused on the weak enforcement of the normal configurational force balance and various options for evaluating the jump in the normal component of the solute flux at the interface. We show that as the reciprocal interfacial mobility vanishes, it plays the role of a penalty parameter enforcing a pure Dirichlet constraint, eventually triggering oscillations in the interfacial velocity. We also examine alternative formulations employing a Lagrange multiplier to enforce this constraint. It is shown that the most convenient choice of basis for the Lagrange multiplier results in oscillations in the multiplier field and a decrease in accuracy and rate of convergence in local error norms, suggesting a lack of stability in the discrete formulation. Under such conditions, neither the direct evaluation of the gradient of the approximation at the phase interface nor the interpretation of the Lagrange multiplier field provide a robust means to obtain the jump in the normal component of solute flux. Fortunately, the adaptation and use of local, domain‐integral methodologies considerably improves the flux evaluations. Several example problems are presented to compare and contrast the various techniques and methods. Copyright © 2004 John Wiley & Sons, Ltd.     

Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.     

A three‐dimensional model describing stress‐temperature induced solid phase transformations: solution algorithm and boundary value problems

An always increasing knowledge on material properties as well as a progressively more sophisticated production technology make shape memory alloys (SMA) extremely interesting for the industrial world. At the same time, SMA devices are typically characterized by complex multi‐axial stress states as well as non‐homogeneous and non‐isothermal conditions both in space and time. This aspect suggests the finite element method as a useful tool to help and improve application design and realization. With this aim, we focus on a three‐dimensional macroscopic thermo‐mechanical model able to reproduce the most significant SMA features (Int. J. Numer. Methods Eng. 2002; 55 : 1255–1264), proposing a simple modification of such a model. However, the suggested modification allows the development of a time‐discrete solution algorithm, which is more effective and robust than the one previously discussed in the literature. We verify the computational tool ability to simulate realistic mechanical boundary value problems with prescribed temperature dependence, studying three SMA applications: a spring actuator, a self‐expanding stent, a coupling device for vacuum tightness. The effectiveness of the model to solve thermo‐mechanical coupled problems will be discussed in a forthcoming work. Copyright © 2004 John Wiley & Sons, Ltd.     

Al-Zn-Ce非晶合金的相选择与组织结构演化

本文研究了具有典型分解特征的Al-Zn-Ce非晶合金的形成和晶化过程，探讨了各种相的生成顺序。XRD和DSC测试结果表明强烈的化合物短程序有利于Al-Zn-Ce非晶合金的形成。在Al-Zn-Ce非晶合金的晶化过程中存在复杂的相选择行为，多种相的竞争形核和有限生长使其具有复杂的结构特点。同时，结果也表明冷速对该体系非晶的形成有很大影响。     

钻井液固相化学清洁剂ZSC-201的合成及性能

介绍了钻井液用固相化学清洁剂ZSC－201的室内合成及性能评价，结果表明，固相化学清洁剂ZSC－201具有较强的抑制性，可有效抑制粘土水化分散，保证钻井液清洁，在钻井液体系中与阴、阳离子型钻井液处理剂配伍性好，同时具有较好的抑制增效作用，在有效的加量内对钻井液滤矢量和流变性等影响小，固相化学清洁剂ZSC－201已在中原油田近30口井中应用，具有良好的推广应用前景。     

W-35%Cu液相活化烧结工艺研究

本文从钨铜两相迁移机制和固溶扩散的角度 ,实验研究了钨铜复合粉的活化和常规烧结 ,分析了钨铜复合粉液相活化烧结过程中球磨时间、烧结温度、保温时间和升温速度对材料致密度的影响。结果表明 ,短时间球磨的钨铜复合粉具有良好的烧结性能 ,烧结温度和保温时间对材料致密度影响很大 ,活化烧结能有效降低烧结温度 ,提高烧结致密度