微波宽频带功率负载的研究

介绍了５００Ｗ宽频带功率负载的设计及实验结果，并将研究成果扩展到１０～１０００Ｗ范围。负载主要技术指标：输入阻抗５０Ω，频带宽度０～１０００ＭＨｚ，电压驻波比≤１．１．表面最高温升△ｔ≤１００℃。     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

双谱估计在导引头信号检测与处理中的应用

双谱估计是一种应用广泛的高阶谱估计。将双谱估计应用于超宽带导引头信号检测与处理系统中,为导引头信号处理中的平滑和滤波增添了一种新的方法。仿真结果表明该方法是有效的。     

量子阱红外探测器能带结构的计算

利用电子波在阱与垒的界面上的反射及干涉效应，计算了量子阱红外探测器(QWIP)的能带结构，并对其适用性进行了分析和讨论。通过与K-P模型比较发现，本方法对计算较宽势阱(阱宽大于4nm)的量子阱结构的电子态适合。在垒宽和阱宽不变条件下，用两种方法计算得到的AlGaAs／GaAs量子阱材料中Al组分x与吸收峰值波长λp的关系曲线基本相同。结果说明，在较宽的范围内，本方法对QWIP能带结构的计算是适用且简便的。     

L波段窄脉宽500W固态功放组件的设计

介绍了作者研制的应用于固态雷达发射机上的L波段500W固态功放组件的工作原理、用途及其主要技术指标。描述了功放组件的设计过程和测试结果。该功放组件在窄脉宽条件下实现了快速上升沿,性能优良,工作稳定可靠。     

Development of a heart monitoring system with high-Tc DC-SQUID gradiometers

We investigated different types of high-T_c DC-SQUID gradiometers with the aim to develop an one-channel heart monitoring system for non-invasive measurements in unshielded environment. This system could be used to obtain information about the patients condition in serial examinations and in emergency cases fast and stable. Step-edge and bicrystal Josephson junctions were used to prepare planar galvanically coupled thin film gradiometers and magnetometers. These sensors were used to carry out measurements in well-shielded and non-shielded environment and we compared the different noise properties and field gradient resolutions. With different types and sizes of high-T_c DC-SQUID sensors magnetocardiograms were measured in a magnetically shielded room. The influence of antenna configurations, SQUID parameters, and cooling conditions on the measurement of magnetocardiograms will be discussed. We investigated possibilities to suppress the earth magnetic field (with pairs of Helmholtz coils) and for noise field compensation in unshielded environment.     

特高压输电线路负序方向纵联保护

采用数字式二阶RC低通滤波器和半波差分傅里叶算法，结合相序变换滤取负序分量，可在微机保护中实现负序方向元件，并可在故障初几毫秒内正确动作。用该方法实现的负序方向元件可正确及时地捕捉到由不对称故障发展起来的三相短路故障瞬间的不对称，故可以反映各种不对称故障和由不对称故障发展起来的三相故障。仿真试验验证了用所提出的方法实现的负序方向元件用于特高压输电线路的可行性和优越性。     

高速并行调制解调器中差错控制方法

本文简单介绍了适合高速并行调制解调器中差错控制的Reed-Solomon编码，提出了适合DSP软件实现的一整套的RS码的编码、译码实用方法，并对该编、译码法采用数字信号处理器TMS320C5410b进行仿真，对其性能与传统方法进行了对比。     

一种确定高窄带滤光片峰值波长的方法

本文介绍一种主动式高窄带滤光片峰值波长的测量方法。该方法可以有效的测量出窄带滤光片的敏感波长，而不需要太复杂的设备。通过染料激光谐振腔的模式竞争，可以测量出滤光片的透射或反射波的波长。     

二维介质PBG结构的工程设计

针对介质材料中按二维菱形周期排列空气圆孔的PBG结构，采用平面波展开法结合迭代技术的理论分析程序，对结构尺寸与介质参数的不同组合进行了批量计算，根据对计算结果的分析，归纳出阻带范围与结构参数之间的函数关系，经数据拟合得出一组准确而快捷的工程设计公式，还给出了根据预期的阻带范围设计PBG结构参数的简明步骤，实例验证了该组公式的实用性。