大庆油田三类油层聚合物驱注入速度研究

注入速度是影响聚合物驱开发效果的重要指标,而由于假设条件的局限性,数值模拟方法无法体现聚合物溶液弹性对注入速度的影响。为了确定大庆油田三类油层合理注入速度,通过不同注入速度条件下的天然岩心驱油试验,对水驱和聚合物驱驱油效率进行了研究,结果表明,聚合物驱驱油效率提高值随驱替速度的变化可由二次多项式来表示。依据此关系式,由势的叠加理论得到的流体在油层中的渗流速度的基础上,建立了该类油层合理注入速度模型,并给出大庆油田三类油层在100 m注采井距下的合理注入速度为0.288 PV年/,该方法对现场开发方案编制有重要指导意义。     

高吸水性树脂吸水率测定条件的研究

通过自然过滤法在不同条件下测定了淀粉接枝丙烯酸高吸水性树脂的吸水率，实验给出了该方法测定吸水率的最佳条件，即：滤袋网孔尺寸为0.180～0．280mm，树脂质量约0．3g，加水量约500mL，吸水时间≥2h，沥水时间≥50min。     

二甲基二烯丙基氯化铵(DMDAAC)及其聚合物研究新进展

二甲基二烯丙基氯化胺 ( DMDAAC)是一种水溶性阳离子单体 ,其均聚物和共聚物 ,高效价廉 ,可广泛应用于油田、造纸、水处理、医药等领域 ,引起了化学工作者的普遍关注。综述了近五年来DMDAAC单体的合成、聚合方法以及均聚物和共聚物研究应用新进展 ,并对今后的研究重点提出一些建议     

Improvement of emission efficiency in polymer light-emitting devices based on phosphorescent polymers

We report improvement of emission efficiency in polymer light-emitting devices (PLEDs) employing phosphorescent polymers. A hole-blocking layer was inserted between the emissive layer and the cathode to enhance recombination efficiency for the injected holes and electrons. Aluminum(III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq) was used for the hole-blocking layer. The resultant PLEDs exhibited significant improvement of emission efficiency. The respective external quantum efficiencies for red, green and blue PLEDs were 6.6, 11 and 6.9%. These values are very high compared with those based on conventional fluorescent polymers.     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Adhesion mechanisms of enamel–varnishes on copper: Adhesion promoter versus corrosion inhibitor

The role of adhesion promoters, copper oxidation, and thermal aging in the adhesion mechanism of enamel on copper winding wires is investigated. Evidence is presented on the predominant role of the copper oxide at the interface in the wire–enamel adhesion phenomena. The oxidation process and the copper oxides stability at the interface are seen to strongly depend upon the thermal aging of the wire and the nature of both the enamel and the promoter. Atomic force and scanning electron microscopy analyses show that so‐called promoters act more efficiently as corrosion inhibitors than as adhesion enhancers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 952–958, 2003     

液晶基元直接横挂于主链上的液晶共聚物的合成与研究

以含液晶基元的单体２，５－双（４－甲氧基苯甲酰氧基）苯乙与苯乙烯通过自由基共聚合反应，首次合成了一系列含液晶性和非液晶性两种序列结构的共聚物。采用ＤＳＣ、偏光显微镜和Ｘ衍射方法研究了共聚物的液晶行为，发现单体和共聚物（只有ＣＰ－５和ＣＰ－６）有很好的热致液晶性。随共聚物中介晶单体单元含量的增加，共聚物玻璃化转变温度Ｔ和热分解温度Ｔ呈规律变化。     

油,水二相流固耦合渗流的数学模型

为了正确模拟油藏中流体流动的动态过程，必须考虑由于注水和开采而引起的多相流体的流动、应力状态的变化和储集层变形之间复杂的相互作用。但由于这种问题的控制方程是三维非线性耦合方程，因此，很难模拟这种耦合作用。利用广义的Ｂｉｏｔ理论建立了一个完全耦合的数学模型，它描述可变形油藏中岩石变形和油水流动的这种相互作用。模型中假设岩石骨架具有弹塑性特性，流体是可压缩的。以岩石骨架位移和油水压力为未知变量所建立的控制方程，包括岩石骨架的平衡方程和流体（油、水）的连续性方程。所建立的流固耦合模型在石油工程，特别是在油藏数值模拟中有广泛的应用。参８（陈志宏摘     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

高聚物共混物及嵌段共聚物熔体的流变性（Ⅰ）共混物熔体的流动特性

综述了高聚物二元共混物及嵌段共聚物熔体的静态流变性，分析了不同共混体系的流动曲线，总结了共混物的流动特性及规律