近45年元江干热河谷灌溉需水的变化趋势分析

基于元江、巍山及禄丰3个站1955~2000年的逐月气象数据及作物种植、农业耕作等资料,采用Mann-Kendall法和R/S分析法,研究了元江干热河谷近45年来的干湿变化及农业灌溉需水量转折变化趋势。结果表明:元江河谷的气温下降、降水量增多、湿度增大,导致ET0显著降低,干湿指数、水稻及农业综合灌溉需水定额都呈下降的趋势。元江河谷的气象因子转折变化集中在20世纪70年代初和80年代末,而农业综合灌溉需水定额的转折变化期则在90年代初与气象因子的第二个转折期基本相同。     

J2EE项目中数据访问策略的选择

本文介绍了目前J2EE项目数据访问策略的选择，其中重点描述了O／R映射这种数据访问策略的特点及其适用的最佳条件，它可以帮助我们在项目的开发阶段通过清晰的映射方案构造出高效率的DAO层，为项目的成功打下良好的基础，特别是对于项目的式样变更以及后期维护．这种数据访问策略提供了最大程度上的灵活性。     

基于降雨资料的雨量预警指标阈值求解模型

为保证雨量预警指标阈值在有效周期范围内发挥预警作用,通过分析现有雨量预警指标阈值的确定方法,提出了基于区域临界雨量法-降雨灾害同频率法-R/S分析法的雨量预警指标阈值求解模型。将该模型应用于江苏省泰兴市降雨时间序列的分析,对最大日降水量时间序列进行阈值确定、趋势分析,并用指标阈值进行预警验证。结果表明,该模型的雨量预警指标阈值确定结果相较单一模型更为准确,且具有一定的时效性,可为农村基层防汛预报预警提供参考。     

1957-2017年泾河流域降雨量及降雨侵蚀力时空变化分析

泾河流域受土壤侵蚀的影响,水土流失较为严重,为对流域水土流失风险评估和防治等提供参考依据,根据1957-2017年泾河流域5个气象站点的日降水资料,运用ArcGIS空间插值、小波分析、R/S分析等方法,分析了该时段降雨量及降雨侵蚀力时空变化规律。结果表明:泾河流域及各气象站点的降雨量与降雨侵蚀力均呈显著正相关关系;泾河流域降雨量与降雨侵蚀力年内分布不均,主要集中在夏季,分别占全年的67.80%和52.86%;泾河流域年均降雨量和降雨侵蚀力分别为496.83 mm和1 481.24 (MJ·mm)/(hm~2·h),年际总体呈波动上升趋势且未来降雨侵蚀力将延续增加趋势,两者均在1996和2009年出现突变点且第一主周期分别为27和17 a;泾河流域降雨量和降雨侵蚀力在空间上均呈从西北到东南递增的趋势。     

An environmental flow method applied in small and medium-sized mountainous rivers

In small and medium-sized mountainous rivers, there are usually hydropower stations in upper reaches as well as widened and heightened river sections in downstream reaches that are close to settlements. The environmental flow (EF) ensures river connectivity and the survival of aquatic organisms. The Tennant and wetted perimeter methods were used to calculate the minimum EF, and the R2CROSS criteria were used to evaluate the rationality of hydraulic parameters. The result shows that downstream areas with large cross-sections may suffer from shallow water depths, insufficient wetted perimeters, and poor overall connectivity of the water bodies, even under the standard EF discharges. A novel method was proposed to ensure EF and sustain suitable hydraulic conditions. The minimum EF calculated by the Tennant method is adopted as the design flow, and a small trapezoidal trough channel is excavated on the wide riverbed of an artificial river section. The width and depth of the small channel are calculated with Manning's equation. As a study case, this method was applied in the Fenglingang River in Zhejiang Province of China. A trapezoidal groove with a depth of 0.74 m and a bottom width of 0.52 m was excavated in the center of Fenglingang River to sustain EF and maintain river connectivity. This small channel not only prevents the river from cutoff, but also enables the water depth and wetted perimeter to meet the demand of aquatic organisms.     

STM32F103的汽车远程防盗系统设计

设计了以STM32F103R6T6单片机为核心的汽车远程防盗系统。应用WT588D语音模块,增加了后视镜折叠和展开功能,使防盗更加智能化。结合STM32F103R6T6的内部结构,设计了系统的硬件电路,详细介绍了系统的软件设计方法。实验结果表明,系统能够实时有效地处理检测到的异常情况,驱动语音模块进行正确的语音提醒。     

Physiological arousal, dissonance, and attitude change: Evidence for a dissonance-arousal link and a "Don't remind me" effect.

Two experiments, with 80 undergraduates, replicated and extended research by R. T. Croyle and J. Cooper (see record 1984-11595-001) indicating that cognitive dissonance involves physiological arousal. In Exp I, Ss wrote counterattitudinal essays under conditions of high or low choice and, to assess arousal effects owing to effort, with or without a list of arguments provided by the experimenter. In high-choice conditions only and regardless of effort, Ss showed both arousal (heightened galvanic skin response) and attitude change. Arousal, however, did not decline following attitude change. The more effortful task (no arguments provided) produced increased arousal but not greater attitude change. In Exp II, the opportunity to change one's attitude following a freely chosen counterattitudinal essay was manipulated. As in Exp I, arousal increased following the essay but did not decline following a postessay attitude change opportunity. When Ss were not given an attitude change opportunity, however, arousal did decline. It is suggested that if dissonance is a drive state, drive reduction typically may be accomplished through gradual cognitive change or forgetting. (47 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一种越野轮胎的结构设计

本文介绍了285/70R17 121Q规格越野轮胎的设计。外轮廓方面:轮胎的设计外直径834 mm,充气断面宽292 mm,轮胎的行驶面宽240 mm,设计行驶面弧高度11.8 mm,胎圈着合直径取值430 mm,轮胎的胎圈着合宽度245 mm,轮胎的断面水平轴位置取值0.842 3;轮胎的胎面花纹设计分为M型和L型,2种花纹为交替变节距呈现,花纹深度13.3 mm,花纹饱和度66.26%。轮胎的施工设计方面:胎面挤出部件位全分层设计,可更好的区分胶种,功能性更强,胎侧挤出部件为双复合设计,冠带层的1#、2#带束层材料使用3×0.30 HT钢丝帘线,胎圈部位的钢丝圈为斜六角形结构,更好的保证了成品断面钢丝圈部位,切割后的近圆形;胎胚的成型使用的设备是萨驰一次法成型机,胎胚的硫化使用的设备是韩国东和液压硫化机,硫化工艺为氮气硫化。生产的成品轮胎的外缘尺寸、强度性能和耐久性能等均满足国家标准要求。     

一种雪地轮胎的结构设计

本文介绍了265/70R17115S规格雪地轮胎的设计,外轮廓方面,轮胎的设计外直径797 mm,充气断面宽282 mm,轮胎的行驶面宽207 mm,设计行驶面弧高度8.5 mm,胎圈着合直径取值430 mm,轮胎的胎圈着合宽度237.8 mm,轮胎的断面水平轴位置取值0.96746;轮胎的胎面花纹设计分为长型花纹(M型、L型)与短型花纹(S型),3种花纹为交替变节距呈现,花纹深度10.4 mm,花纹饱和度68.16%。轮胎的施工设计方面:胎面挤出部件为全分层设计,可更好的区分胶种,功能性更强,胎侧挤出部件为双复合设计,冠带层的1#、2#带束层材料使用3×0.30HT钢丝帘线,胎圈部位的钢丝圈为斜六角形结构,更好的保证了成品断面钢丝圈部位,切割后呈近圆形;胎胚成型使用的设备是萨驰一次法成型机,胎胚硫化使用的设备是韩国东和液压硫化机,硫化工艺为氮气硫化。生产的成品轮胎的外缘尺寸、强度性能和耐久性能等均满足国家标准要求。     

γ—TiAl增压涡轮熔模铸造过程数值模拟研究

根据熔模型壳离心浇注的铸造工艺特点，建立了γ－TiAl增压涡轮凝固传热过程的数值模型，推导了离心压力下γ－TiAl金属间化合物的凝固收缩和补缩过程数学模型，模拟计算了γ－TiAl增压涡轮铸件的温度场和收缩缺陷，结果表明，模型能可靠计算γ－TiAl增压涡轮铸件凝固过程的温度分布和准确预测铸件的收缩缺陷，数值模拟结果与实验结果吻合良好，数值模拟结果证实了前期工作所提出的进一步减少及消除收缩缺陷的优化工艺措施的合理性。