Utility of an image-based canopy reflectance modeling tool for remote estimation of LAI and leaf chlorophyll content at the field scale

This paper presents a physically-based approach for estimating critical variables describing land surface vegetation canopies, relying on remotely sensed data that can be acquired from operational satellite sensors. The REGularized canopy reFLECtance (REGFLEC) modeling tool couples leaf optics (PROSPECT), canopy reflectance (ACRM), and atmospheric radiative transfer (6SV1) model components, facilitating the direct use of at-sensor radiances in green, red and near-infrared wavelengths for the inverse retrieval of leaf chlorophyll content (C_ab) and total one-sided leaf area per unit ground area (LAI). The inversion of the canopy reflectance model is constrained by assuming limited variability of leaf structure, vegetation clumping, and leaf inclination angle within a given crop field and by exploiting the added radiometric information content of pixels belonging to the same field. A look-up-table with a suite of pre-computed spectral reflectance relationships, each a function of canopy characteristics, soil background effects and external conditions, is accessed for fast pixel-wise biophysical parameter retrievals. Using 1 m resolution aircraft and 10 m resolution SPOT-5 imagery, REGFLEC effectuated robust biophysical parameter retrievals for a corn field characterized by a wide range in leaf chlorophyll levels and intermixed green and senescent leaf material. Validation against in-situ observations yielded relative root-mean-square deviations (RMSD) on the order of 10% for the 1 m resolution LAI (RMSD = 0.25) and C_ab (RMSD = 4.4 μg cm^− 2) estimates, due in part to an efficient correction for background influences. LAI and C_ab retrieval accuracies at the SPOT 10 m resolution were characterized by relative RMSDs of 13% (0.3) and 17% (7.1 μg cm^− 2), respectively, and the overall intra-field pattern in LAI and C_ab was well established at this resolution. The developed method has utility in agricultural fields characterized by widely varying distributions of model variables and holds promise as a valuable operational tool for precision crop management. Work is currently in progress to extend REGFLEC to regional scales.     

DRYING KINETICS DERIVED FROM DIFFUSION EQUATION WITH FLUX-TYPE BOUNDARY CONDITIONS

A novel approach to drying of both hygroscopic and non-hygroscopic capillary - porous materials is presented. The equations for drying kinetics are obtained, based on the analytical solution of the differential equation of diffusion with a boundary condition in the form of the flux. Theoretical drying curves generated form the model solution compare well with experimental literature data for drying of materials with different sorption properties exemplified by wool bobbins, brick slabs and corn kernels.     

玉米须化学成分研究

将干燥玉米须水煮提取,提取液依次用乙酸乙酯和正丁醇萃取,制得乙酸乙酯和正丁醇提取物,用硅胶柱层析进行分别分离两种提取物得到4个化合物,依据理化性质及波普数据分析,分别鉴定它们的结构为：香草醛（1）、硬脂酸（2）、尿囊素（3）和邻苯二甲酸二异辛酯（4）。其中,化合物1和3为首次从该植物中分离得到。     

电池用变性淀粉的工艺研究

本文用交联、氧化二种化学方法加工玉米淀粉，制取了复合变性淀粉，并重点研究、筛选了反应体系中催化剂、淀粉浓度、交联剂、氧化剂、反应温度及碱量等工艺条件．     

Improved Solubility and Emulsification of Wet-Milled Corn Germ Protein Recovered by Ultrafiltration–Diafiltration

This study evaluated Ultrafiltration–Diafiltration (UFDF) as a means to improve the extractability of wet-milled corn germ protein and determined its effects on the functional properties of the recovered protein product. Wet germ and dried germ proteins were extracted by using 0.1 M NaCl at 50 °C. Major steps in the method were stirring, centrifugation, UFDF and freeze-drying. For dried germ, the UFDF method showed marginal increase in protein extraction efficiency, while that of wet germ remained similar to what we observed for the baseline method (saline extraction with dialysis instead of UFDF). UFDF protein extracts from both germ samples were significantly more soluble than extracts recovered by the baseline method and showed atypical solubility profiles; i.e., the amount of soluble protein was essentially unchanged under acidic, neutral, and alkaline pH. UFDF-dried germ protein was markedly more soluble than UFDF-wet germ protein (80 vs 50 % soluble protein, respectively) between pH 2 and pH 10. Both of these UFDF-germ proteins also had emulsifying capacities and water-holding capacities that were superior to those of proteins extracted by the baseline method, but this favorable effect by UFDF was not observed for emulsion stability, foaming properties, and heat stability.     

Lipid production from sweet sorghum bagasse through yeast fermentation

Cryptococcus curvatus has great potential in fermenting unconditioned hydrolysates of sweet sorghum bagasse. With hydrolysates obtained by enzymatic hydrolysis of the solid pretreated by microwave with lime, the maximal yeast cell dry weight and lipid content were 10.83 g/l and 73.26%, respectively. For hydrolysates obtained in the same way but without lime, these two parameters were 15.50 g/l and 63.98%, respectively. During yeast fermentation, glucose and xylose were consumed simultaneously while cellobiose was released from the residual bagasse. The presence of lime, on one hand, made cellulose more accessible to enzymes as evidenced by higher total reducing sugar release compared to that without during enzymatic hydrolysis step; on the other hand, it caused the degradation of sugars to non-sugar chemicals during pretreatment step. As a result, higher lipid yield of 0.11 g/g bagasse or 0.65 ton/hectare of land was achieved from the pathway of microwave pretreatment and enzymatic hydrolysis while 0.09 g/g bagasse or 0.51 ton/hectare of land was attained from the process of lime-assisted microwave pretreatment followed by the same enzymatic saccharification.     

Rejection thresholds (RjT) of sweet likers and dislikers

Sweetness is generally a desirable taste, however consumers can be grouped into sweet likers and dislikers according to optimally preferred sucrose concentrations. Understanding the levels of sweetness in products that are acceptable and unacceptable to both consumer groups is important to product development and for influencing dietary habits. The concentrations at which sucrose decreases liking (the rejection threshold; RjT) in liquid and semi-solid matrices were investigated in this study. Thirty six consumers rated their liking of 5 sucrose aqueous solutions; this identified 36% sweet likers (SL) whose liking ratings increased with increasing sucrose and 64% sweet dislikers (SD) whose liking ratings decreased above 6% (w/v) sucrose. We hypothesized that SL and SD would have different RjT for sucrose in products. This was tested by preparing 8 levels of sucrose in orange juice and orange jelly and presenting each against the lowest level in forced choice preference tests. In orange juice, as sucrose increased from 33 g/L to 75 g/L the proportion of people preferring the sweeter sample increased in both groups. However, at higher sucrose levels, the proportion of consumers preferring the sweet sample decreased. For SD, a RjT was reached at 380 g/L, whereas a significant RjT for SL was not reached. RjT in jelly were not reached as the sweetness in orange jelly was significantly lower than for orange juice (p < 0.001). Despite statistically significant differences in rated sweetness between SL and SD (p = 0.019), the extent of difference between the two groups was minor. The results implied that sweet liker status was not substantially related to differences in sweetness perception. Self-reported dietary intake of carbohydrate, sugars and sucrose were not significantly affected by sweet liker status. However the failure to find an effect may be due to the small sample size and future studies within a larger, more representative population sample are justifiable from the results of this study.     

Bioaugmentation with Thermoanaerobacterium thermosaccharolyticum W16 to enhance thermophilic hydrogen production using corn stover hydrolysate

In the present work, with corn stover hydrolysate as the substrate, an efficient hydrogen-producing thermophile, Thermoanaerobacterium thermosaccharolyticum W16, was added to three kinds of seed sludge (rotten corn stover (RCS), cow dung compost (CDC), and sludge from anaerobic digestion (SAD)) to investigate the effect of bioaugmentation on thermophilic hydrogen production. Batch test results indicate that the bioaugmentation with a small amount of the strain T. thermosaccharolyticum W16 (5% of total microbes) increased the hydrogen yield to varying degrees (RCS: from 8.78 to 9.90 mmol H₂/g utilized sugar; CDC: from 8.18 to 8.42 mmol H₂/g utilized sugar; SAD: from 8.55 to 9.17 mmol H₂/g utilized sugar). The bioaugmentation process also influenced the soluble metabolites composition towards more acetate and less butyrate production for RCS, and more acetate and less ethanol accumulation for SAD. Microbial community analysis indicates that Thermoanaerobacterium spp. and Clostridium spp. dominated microbial community in all situations and might be mainly responsible for thermophilic hydrogen generation. For RCS and SAD, the bioaugmentation obviously increased the relative abundance of the strain T. thermosaccharolyticum W16 in microbial community, which might be the main reason for the improvement of hydrogen production in these cases.     

Formation of corn fiber gum-milk protein conjugates and their molecular characterization

Corn fiber arabinoxylan is hemicellulose B isolated from the fibrous portions (pericarp, tip cap, and endosperm cell wall fractions) of corn kernels and is commonly referred to as corn fiber gum (CFG). Our previous studies showed that CFG isolated from corn bran (a byproduct of corn dry milling) contains very little protein and is an inferior emulsifier for oil-in-water emulsion systems as compared to corn fiber gum isolated from corn fiber derived from the corn wet-milling process. The protein deficient CFG isolated from corn bran was covalently conjugated with byproducts of cheese processing, β-lactoglobulin (β-LG) and whey protein isolate (WPI) using an economical food-grade Maillard-type heating reaction for the purpose of increasing their commercialization potential as a food emulsifier and soluble nutritional additive in beverages. The formation of the CFG-protein conjugates has been confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). It has also been demonstrated that CFG-protein conjugates are capable of producing fine emulsions with better stability than either CFG or protein alone. The molecular characterization of CFG-protein conjugates was performed by high-performance size-exclusion chromatography (HPSEC) coupled to on-line multi-angle laser light scattering and viscometric detection. The analysis by HPSEC revealed that CFG-protein conjugates had higher weight-average molar mass (M_w, 340-359 kDa) and polydispersity (M_w/M_n, 1.74) than the corresponding unconjugated CFG (M_w, 290 kDa and M_w/M_n, 1.35). The z-average root-mean-square radius of gyration (R_gz) of CFG-protein conjugates was slightly higher (30.5-33.5 nm) in comparison to CFG (29.5 nm) but their weight-average-intrinsic viscosity (η) remained unchanged (about 1.32 dL g⁻¹). The Mark-Houwink exponent “a” of conjugates (0.40) was lower than the unconjugated CFG (0.53) indicating the formation of a more compact structure after conjugation with protein. These findings should benefit the beverage industry, which can use this information to produce a high quality emulsifier from the low-value byproducts of corn dry milling and cheese processing.     

Kefir Immobilized on Corn Grains as Biocatalyst for Lactic Acid Fermentation and Sourdough Bread Making

Abstract: The natural mixed culture kefir was immobilized on boiled corn grains to produce an efficient biocatalyst for lactic acid fermentation with direct applications in food production, such as sourdough bread making. The immobilized biocatalyst was initially evaluated for its efficiency for lactic acid production by fermentation of cheese whey at various temperatures. The immobilized cells increased the fermentation rate and enhanced lactic acid production compared to free kefir cells. Maximum lactic acid yield (68.8 g/100 g) and lactic acid productivity (12.6 g/L per day) were obtained during fermentation by immobilized cells at 37 °C. The immobilized biocatalyst was then assessed as culture for sourdough bread making. The produced sourdough breads had satisfactory specific loaf volumes and good sensory characteristics. Specifically, bread made by addition of 60% w/w sourdough containing kefir immobilized on corn was more resistant regarding mould spoilage (appearance during the 11^th day), probably due to higher lactic acid produced (2.86 g/Kg of bread) compared to the control samples. The sourdough breads made with the immobilized biocatalyst had aroma profiles similar to that of the control samples as shown by headspace SPME GC‐MS analysis.