基于同步辐射技术的高分子多尺度结构薄膜拉伸加工物理研究

基于自制溶液拉伸装置与同步辐射技术,对不同温度状态下聚乙烯醇薄膜水中拉伸诱导结构演变,及其纤维化过程进行了深入探究。通过拉力传感器所获拉伸过程的应力应变曲线以力学平台起点、终点、应变硬化点作为界限点进行区间划分。宽角X射线衍射结果表明,在①～③区间,出现了拉伸诱导聚乙烯醇晶体熔融过程。小角X射线散射结果表明,拉伸诱导片晶-纳米纤维结构转换过程出现在②区间初始,且此过程即熔融-重构过程。在③区间,在含量不断增多趋势下,纳米纤维结构开始发生周期性排列,邻纤维间距大约在14～18nm。而拉伸温度上升,可显著提高纳米纤维结构排列整体性与完善性,此纤维结构有助于优化偏光膜产品结构均衡化与光学性能。     

（S）-噻吗洛尔半水合物的合成及表征

为了开发β受体阻断剂新药（S）-噻吗洛尔半水合物，采用3-吗啉-4-氯-1，2，5-噻二唑为起始原料，经水解反应得到中间体1（3-吗啉-4-羟基-1，2，5-噻二唑）。中间体1与R-环氧氯丙烷发生醚化反应，经后处理及重结晶得到中间体2 {（R）-4-［4-（环氧乙烷-2-基甲氧基）-1，2，5-噻二唑-3-基］吗啉}。中间体2经胺化反应、马来酸成盐及重结晶得到（S）-马来酸噻吗洛尔。（S）-马来酸噻吗洛尔经游离、纯水转晶得到符合药典标准的（S）-噻吗洛尔半水合物，总收率14.05%且e.e.值为99.66%。最终成品经IR、1H-NMR、13C-NMR、MS、TGA、DSC表征，并优化各步反应条件。结果表明:以三乙胺为醚化反应缚酸剂75 ℃反应最佳；以乙醇为胺化反应溶剂46 ℃反应16 h最佳；S-噻吗洛尔的转晶拆分以水作溶剂，比传统不对称合成工艺安全稳定，操作简单，适合工业化生产。     

基于组合度量的应急救援网络路由算法研究

针对AODV协议只选用跳数最小进行选路的缺陷,提出一种新的基于组合量度的路由协议(AMAODV)。该协议综合考虑路由的跳数、节点间链路的有效期和可用带宽3种因素,通过层次分析的方法判定上述3种因素对链路传输的影响,提出了组合度量函数,借助组合度量函数的计算来选择一条具有较小度量值的路径进行传输。仿真结果表明:AMAODV协议在适应高速移动的网络环境上具有一定优势,并能降低网络时延和增加网络吞吐量。     

Energy Band-gap Calculation of d-Ta2O5 Using sX-LDA and B3LYP Methods

The energy band-gap and related factors of tantalum pentoxide with hexagonal phase were investigated using hybrid functional B3 LYP and s X-LDA methods. The results showed that both s X-LDA and B3 LYP techniques reveal the indirect semiconductor nature of δ-Ta2O5, whereas the obtained value of energy band-gap is much higher than previous theoretical reports but closer to the experimental data. The optical bandgap of δ-Ta2O5 is expected to originate from the O 2p→Ta 5d transition which may benefit from the d-s-p hybridization.     

面向大学生心理问题分析的数据挖掘应用

当前已经进入大数据时代,数据挖掘是在大量的数据中提取有用的有价值的知识。本文结合高校学生心理测试产生的数据,采用ID3算法构造决策树分析预测大学生心理健康状况,为学校的心理辅导工作提供参考依据。     

不同晶相结构ZrO2负载铜基催化剂用于二乙醇胺脱氢反应

通过制备不同晶相结构〔单斜相(m-ZrO_2)、四方相(t-ZrO_2)和无定型(a-ZrO_2)〕ZrO_2载体,再通过沉积沉淀法制得Cu/m-ZrO_2、Cu/t-ZrO_2和Cu/a-ZrO_2催化剂,分别用于催化二乙醇胺脱氢合成亚氨基二乙酸反应。采用XRD、氮气物理吸附脱附、XPS、H_2-TPR、CO_2-TPD对催化剂的结构进行了表征。结果表明,Cu/m-ZrO_2催化剂界面更加有利于Cu~+/Cu~0稳定存在,具有更多的碱性位点,且抗氧化性较好。在二乙醇胺脱氢反应中,Cu/m-ZrO_2催化剂性能最好,反应时间为2.5 h,亚氨基二乙酸收率为97.64%。     

Room Temperature Ferromagnetism in Co-doped CuAlO2 Nanofibers Fabricated by Electrospinning

One-dimensional, diluted magnetic semiconductor nanofibers have attracted increasing attention for their unique magnetic properties, large specific surface area, and high porosity. These qualities lead to excellent performance in magneto-optical devices, magnetic resonance imaging, ferrofluids and magnetic separation. The purpose of this study is to fabricate P-type one dimensional CuAlO2-based diluted magnetic semiconductor nanofibers. First, we fabricated Cu Al0.95Co0.05O2 nanofibers with an average diameter of 1 μm with the electrospinning method. The annealed nanofibers were thermally treated at a temperature of 1 100 ℃ and then shrunk to a diameter of about 650 nm. We used X-ray diffraction measurements and Raman spectra to confirm that the Cu Al0.95Co0.05O2 nanofibers had a single impurity free delafossite phase. The X-ray photoelectron spectroscopy analysis indicates that Co was present in the +2 oxidation state, resulting in an room temperature ferromagnetism in the Cu Al0.95Co0.05O2 fiber. This contrasts with nonmagnetism in pristine CuAlO2 fiber. The coercivity(Hc) value of 65.26 Oe and approximate saturation magnetization(Ms) of 0.012 emu/g demonstrate good evidence of ferromagnetism at room temperature for Cu Al0.95Co0.05O2 nanofibers.