一种新型悬臂棒条筛的设计与应用

介绍了一种新型悬臂棒条筛分机械,论述了其结构、工作原理和技术特性。从理论和实践两方面论证了它的结构、处理能力、筛分效率、返矿率都明显优于普通悬臂棒条筛分机械,可广泛应用于高炉槽下烧结矿的筛分作业。     

边梁效应的数值模拟

应用Fourier级数方法分析了具有边梁加固的板的弯曲问题，获得了Levy型的准确解，并利用该解模拟了边梁的效应，给出了板的挠度、糨矩及剪力等受边梁刚度影响的数值结果。结果表明：（1）忽略边梁的抗扭能力将导致显著的误差;(2)边梁的抗弯、抗扭性能应综合考虑，而不应作为两个相互独立的因素，否则将会出现板的挠度、内力等随边梁刚度的增大而增大的不合理现象。     

保证跌落试件姿态的方法

进行包装件的自由跌落试验时,必须保证试件姿态符合标准规定。笔者在实践中总结出一种保证试件姿态和检验试件姿态误差的具体方法。     

空间交会激光雷达信息测量技术

为了测量目标飞行器的位置及速度等信息,提出采用模拟插入脉冲计数法测距,最小二乘曲线拟合微分法测速,四象限(QD)光斑定位法测角。并在MATLAB/SIMULINK环境下,对采用该方法的脉冲激光雷达信息测量系统进行了计算机仿真。结果表明,距离测量精度高,误差小于0.01m,速度精度也高,误差小于0.02m/s。采用该测量技术的脉冲激光雷达是可靠的。     

Strain waves in colliding bars having nonparallel faces

The paper reports the experimental investigation data for the effect that nonparallel faces of bars under impact exert on the parameters of longitudinal and bending strain waves generated in the bars. The changes in stress magnitudes in the bar under impact with growing angle of the impact faces offset are described. __________ Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, pp. 73–78, November–December, 2006.     

Thermogravimetry and wide angle X-ray diffraction study on the structure of irradiated and thermally treated kodar film

The degradation behaviour of Kodar [poly(1,4-cyclohexylene dimethyl-eneterephthalate)] was investigated in air using thermogravimetry, differential thermal analysis and wide angle X-ray diffraction studies. The rates of crystallization and degradation were influenced by thermal exposure and polychromatic irradiation (Λ > 290 nm) for different time intervals. The crystallinity changes (X_c%) and activation energies (ΔE) for the systems have been determined.     

轴测投影非轴向伸缩系数及与轴测轴的夹角

导出了正轴测图中投影面平行线的伸缩系数及其与轴测投影轴的夹角计算公式,使得各种形状形体的轴测投影画法更简单、尺寸量取更精确.     

覆膜滤料的滤尘性能测试方法研究

由于覆膜滤料的结构和性能有别于普通滤料，因而普通滤料的滤尘性能测试方法不完全适用于覆滤料。本文作者在总结实践经验的基础上，提出了在覆膜滤料的滤尘性能测试中应注意的一些问题和应增加的测试项目。     

卡西欧FX-4800P计算器编程在滹沱河倒虹吸工程施工测量中的应用

结合建筑物的结构特点利用卡西欧FX-4800P计算器编程,配合全站仪进行现场测量放样,能将施工测量中计算、施测、资料整理及校核工作同时进行,有效提高了施工测量的精度及效率,且计算器体形轻巧,便于携带和使用.     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008