硫酸根对离子膜电解工艺影响及处理

离子膜电解工艺中,硫酸根的影响有:硫酸根易与钙离子结合,降低氯气纯度,降低电解槽电流效率。提出去除硫酸根的方法有:钡法,钙法,碳酸钡法,树脂吸附法,膜法,以及膜法+冷冻结晶法。     

纳滤膜的污染成因及防止技术研究

结合科学实验研究成果分析了纳滤膜无机污染、有机污染和微生物污染三种主要污染的机理。首次提出了动态有机污染模型理论,并就纳滤膜污染的防止提供了一些有效可行的技术处理方案,为纳滤膜的推广应用提供参考。     

面向二十一世纪的生物农药

简述了农药的发展经历，介绍了国内外生物农药的研究、发展和应用的现状及发展趋势。     

Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology

The application of ion exchange membranes as solid polymer electrolytes (SPE) in fuel cells is state-of-the-art. This technology needs no supporting electrolyte; consequently it can be applied for electro-organic syntheses in order to save process steps. In this case the process is not predetermined to a maximized energy efficiency so that the selection of the cell design, of the electrode materials and of the operating conditions can be focused on a high selectivity of the electrode reactions. The electro-osmotic stream, which is caused by the solvation shells of the ions during their migration through the membrane, and hence is a typical property of SPE technology, has a significant effect on the electrode reactions. It generates enhanced mass transfer at the electrodes, which is beneficial for reaction selectivity. It can be influenced by the choice of, and possibly by the preparation of, the membrane. An additional remarkable advantage of SPE technology is the exceptional long durability of oxide coated electrodes. By combination of several process engineering methods stable operation of SPE cells has been realized, even for examples of non-aqueous reaction systems. Experiments up to 6000 h duration and in cells of up to 250 cm² membrane area show the potential for industrial application.     

用两次键合技术制备均匀单晶硅膜

硅直接键合(SDB)技术用于制备SOI片(BESOI)是键合技术的最重要应用之一,研究了制备BESOI片中的键合和减薄问题,获得了大面积的均匀单晶硅膜,通过实验分析了这种方法获得的薄膜的平整度和影响因素。并针对压力传感器的敏感膜,通过两次键合及SOI自停止腐蚀成功制备了厚度可控的均匀单晶硅薄膜,硅膜表面质量优良,平整度在±0.15μm的范围内。     

多晶硅衬底上的RF MEMS开关

在微机械开关与硅IC工艺设计和兼容方面进行了改进,获得了一种可与IC工艺兼容的RFMEMS微机械开关.采用介质隔离工艺技术把这种RFMEMS微机械开关制作在绝缘的多晶硅衬底上,实现了与IC工艺兼容;采用在金属膜桥的端点附近刻蚀一些孔的优化方法,降低了RFMEMS微机械开关的下拉电压.用TE2 819电容测试设备测试开关的电容,测得开关的开态电容、关态电容和致动电压分别为0 32 pF、6 pF和2 5V .用HP875 3C网络分析仪对RFMEMS微机械开关进行了RF特性测试,得出RFMEMS微机械开关在频率1 5GHz下关态的隔离度为35dB ,开态的插入损耗为2dB ,用示波器测得该开关的开关     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.     

CA／PAN中空纤维血浆分离膜的结构与性能

本研究以CA及PAN的共混溶液,通过干-湿法纺丝制取中空纤维,利用共混高聚物各组分在凝固剂中相分离速度的差异,形成具有稳定结构的中空纤维孔膜,该膜用于分离血液中的血浆成分具有良好效果。讨论了成型条件及添加剂等对膜结构、性能的影响,用SEM及图相分析仪、MAP压汞仪及DSC等分析手段,对膜的微孔结构、形态、孔尺寸及中空纤维膜的血浆通量和水通量等进行了系统的考查。     

Si基膜片型气敏传感器微结构单元的热学性能

微结构气敏传感器由于其微型化、低功耗、易阵列化和易批量生产等优点而受到国内外研究者的广泛关注。利用微机电系统（MEMS）加工技术，制备Si基膜片型微结构单元，并分析其热学性能。这种单元工作区温度为-300℃时，加热功率约75mW；并且膜片工作区的热质量很小，温度可以于毫秒量级的时间内，在室温和450℃之间调制。利用这种微结构单元，可以在温度调制方式下，研究气敏薄膜的电学特性和敏感机理。     

软X射线对血液有形成分表面电荷的影响——2、淋巴细胞和血小板膜电荷的变化

软X射线不仅能引起红细胞表面电荷的变化,同时也能导致淋巴细胞和血小板表面电荷下降,表现为照射后它们的电泳率下降。低剂量范围内,这种电荷的变化是暂时性的,照后4小时降到最低点,24小时后恢复到对照的水平。细胞电泳率的下降与辐射剂量相关。淋巴细胞是一个复杂的细胞群,正常状态下,按细胞在电场中泳动速度的快慢,可分为两个组分:快峰为T细胞,慢峰为B细胞。软X射线照射以后,T和B细胞的电泳率皆减慢,频数分布峰值下降,离散度加大。血小板成分单一,电泳率较一致。 从照射浓集的血小板再加回自身血浆中电泳率的下降较照射血浆再加到血小板中的电泳率下降大得多;受照射的血小板在磷酸缓冲液中电泳率下降较在血浆悬液中严重得多;2000 rad照后,悬浮于血浆中的血小板电泳率能恢复,而悬浮于磷酸缓冲液中则不能恢复,三个方面来看,血浆中可能存在抗辐射因子。超氧化物岐化酶能有效地预防血小板电泳率的下降,从而可阻止血小板的凝聚。