压力设备应力腐蚀开裂的预防分析法准则

应力腐蚀开裂(SCC)是压力容器及管道腐蚀失效的主要形式之一。提出了设备SCC的新预防分析法,它包含了三个阶段的预防准则。并实例说明了如何运用预防分析法准则,从设备成形前(即设计阶段)、成形中(即制造阶段)、成形后(即设备使用阶段)防止SCC的发生。该准则应推广到工程应用中去。     

TRPM7-Mediated Calcium Transport in HAT-7 Ameloblasts

TRPM7 plays an important role in cellular Ca²⁺, Zn²⁺ and Mg²⁺ homeostasis. TRPM7 channels are abundantly expressed in ameloblasts and, in the absence of TRPM7, dental enamel is hypomineralized. The potential role of TRPM7 channels in Ca²⁺ transport during amelogenesis was investigated in the HAT-7 rat ameloblast cell line. The cells showed strong TRPM7 mRNA and protein expression. Characteristic TRPM7 transmembrane currents were observed, which increased in the absence of intracellular Mg²⁺ ([Mg²⁺]_i), were reduced by elevated [Mg²⁺]_i, and were inhibited by the TRPM7 inhibitors NS8593 and FTY720. Mibefradil evoked similar currents, which were suppressed by elevated [Mg²⁺]_i, reducing extracellular pH stimulated transmembrane currents, which were inhibited by FTY720. Naltriben and mibefradil both evoked Ca²⁺ influx, which was further enhanced by the acidic intracellular conditions. The SOCE inhibitor BTP2 blocked Ca²⁺ entry induced by naltriben but not by mibefradil. Thus, in HAT-7 cells, TRPM7 may serves both as a potential modulator of Orai-dependent Ca²⁺ uptake and as an independent Ca²⁺ entry pathway sensitive to pH. Therefore, TRPM7 may contribute directly to transepithelial Ca²⁺ transport in amelogenesis.     

IrO2-pH微电极的研制及钢筋/混凝土界面pH的测量

采用电化学阳极氧化和高温碳酸盐氧化两种方法制备 IrO2-pH微电极，其特点是对氢离子响应快、线性范围宽、机械性能好、具有长期稳定性 .考察了该电极的pH响应特性、化学成分、机械性能等.结果表明，这种IrO2-pH微电极 适用于钢筋/混凝土界面pH值的原位测量.     

EFFECT OF NaOH CONCENTRATION AND AlO_2~- SPECIES ON CAUSTIC STRESS CORROSION CRACKING OF A LOW ALLOY STEEL AT 260℃

用慢应变速率法（ＳＳＲＴ）、动电位扫描和循环伏安法研究１６ＭｎＲ钢在氧化铝溶出过程中的高温碱脆行为。结果表明，在２６０℃，１６ＭｎＲ钢的碱脆敏感性随ＮａＯＨ浓度（７．４２－１０．０６ｍｏｌ／Ｌ）的升高而增大；当碱液中含有ＡｌＯ２＾－离子时，１６ＭｎＲ钢的碱脆敏感电位区缩小，样品表面腐蚀产物保护性好，ＡｌＯ２＾－离子对低合金钢高温碱脆有一定抑制作用；１６ＭｎＲ钢在２６０℃碱液中生成的腐蚀产物为Ｆｅ３     

高pH值污水杀菌剂的研究

介绍了高pH值污水细菌含量状况，研究了高pH值污水细菌生长与抗药性的变化规律，研制出针对高pH值污水应用的高效杀菌剂。     

碳钢在含硫介质中的极化行为

采用原油罐罐底水为介质,测定了不同含硫量、PH值以及不同温度下碳钢的极化曲线,分析了各因素对碳钢极化行为的影响。研究结果表明:碳钢在硫含量大于0.2g·L～（-1）、PH值大于9以及一定电位下处于钝化状态,腐蚀电流小;较高温下将大大加速碳钢的腐蚀。     

Corrosion rate of magnesium and its alloys in buffered chloride solutions

The effect of the buffer capacity of test solution on the corrosion rate of cast pure (>99.95 mass%) and high-purity (>99.9999 mass%) magnesium, and AZ31 and AZ91E has been studied. Their corrosion rates were measured gravimetrically in a pH 6.5 and a pH 9 borate buffer including chloride ions, and in a conventional chloride solution. Except for the AZ91E in the pH 6.5, the corrosion rates of all the examined materials depended solely on the pH of the test solution, although the materials had a variety of purity and alloying elements. Higher buffer capacity probably masked the detrimental effect of the “cathodic impurities”. The corrosion rates measured in the buffers were considered as giving the resistivity of the passive film to anodic reactions. The high-purity magnesium had a fair corrosion resistance even in conventional chloride solution.     

介质条件对核电用镍基合金传热管SCC的影响

综述了环境因素，包括温度、ＰＨ值、溶解氧、氯离子、氢、荷性碱含硫化合物以及铅等对压水堆核电站蒸汽发生器传热管用基合金材料（８００、６００、６９０合金）和腐蚀破裂（ＳＣＣ）敏感性的影响。     

渗铝304不锈钢不同实验方法的SCC敏感性评价

采用恒载荷试验方法及慢应变速率试验(SSRT)方法研究了渗铝304奥氏体不锈钢在沸腾42％MgCl2溶液中的应力腐蚀破裂(SCC)性能，分析了渗铝不锈钢SCC机理，讨论了不同试验方法对渗铝不锈钢SCC敏感性评价的影响．试验表明：渗铝处理可明显提高304钢抗SCC性能，其机理为渗铝层的环境遮断作用及对基体的电化学保护作用．两种方法在评价各种渗铝钢材料SCC性能方面有统一性：恒载荷试验中SCC敏感性指标σth高的材料，SSRT中SCC敏感性指标δi也相对较高．但两种方法中渗铝试样的断口形态表现出差异：恒载荷试验为穿晶型SCC断口，而SSRT无SCC断口特征，为韧性断口。     

Cu-Al-Be形状记忆合金的应力腐蚀性能

用恒载荷法和慢应变速率法及SEM研究了Cu-Al-Be形 状记忆合金在甘油、海水和氨介质中的应力腐蚀性能.结果表明，Cu-Al-Be合金具有良 好的抗海水应力腐蚀性能和较低的氨介质应力腐蚀倾向.单相马氏体有较 好的耐海水腐蚀能力，可减少腐蚀引起的裂纹源；外应力下马氏体的孪晶变形和变体间的界 面迁移，则有利于松弛应力集中，阻碍和延缓腐蚀裂纹源的扩展，从而提高Cu-Al-Be合金的 应力腐蚀能力.