烧结NdFeB合金中的夹杂物

使用金相显微镜、扫描电镜及Ｘ射线能谱和波谱观察并分析了ＮｄＦｅＢ烧结材料中夹杂物的形态、数量和组成。磁粉制备后立即烧结的ＮｄＦｅＢ磁体中的夹杂物是氧化钕；而在不同环境条件下放置后的ＮｄＦｅＢ粉再烧结的材料中发现，除了氧化钕的夹杂物外，还有钕的氮化物及钕的氮氧复合夹杂物。同时还论讨了这些夹杂物对于ＮｄＦｅＢ材料磁性能的影响。     

Low temperature delamination of plastic encapsulated microcircuits

Plastic encapsulated microcircuits (PEMs) are increasingly being used in applications requiring operation at temperatures lower than the manufacturer’s recommended minimum temperature, which is 0°C for commercial grade components and −40°C for industrial and automotive grade components. To characterize the susceptibility of PEMs to delamination at these extreme low temperatures, packages with different geometries, encapsulated in both biphenyl and novolac molding compounds, were subjected to up to 500 thermal cycles with minimum temperatures in the range −40 to −65°C in both the moisture saturated and baked conditions. Scanning acoustic microscopy revealed there was a negligible increase in delamination at the die-to-encapsulant interface after thermal cycling for the 84 lead PQFPs encapsulated in novolac and for both 84 lead PQFPs and 14 lead PDIPs encapsulated in biphenyl molding compound. Only the 14 lead novolac PDIPs exhibited increased delamination. Moisture exposure had a significant effect on the creation of additional delamination.     

基于工作站和EUCLID－IS的计算机组装结构CAD系统研究

随着集成电路技术的发展及计算机性能的不断提高，计算机组装结构设计在计算机，总体设计中的地位越来越重要，它直接影响到计算机性能的提高。本文针对一个基于工作站和ＥＵＣＬＩＤ－ＩＳ软件的电子计算机组结构ＣＡＤ系统，从软、硬件平台，系统功能及实现等方面进行了讨论，旨在为电子计算机组装结构设计提供一种强有力的、方便的设计工具，有利于增强国产计算机的市场竞争能力。     

基于工作站和EUCLID-IS的计算机组装结构CAD系统研究

随着集成电路技术的发展及计算机性能的不断提高，计算机组装结构设计在计算机，总体设计中的地位越来越重要，它直接影响到计算机性能的提高。本文针对一个基于工作站和ＥＵＣＬＩＤ－ＩＳ软件的电子计算机组结构ＣＡＤ系统，从软、硬件平台，系统功能及实现等方面进行了讨论，旨在为电子计算机组装结构设计提供一种强有力的、方便的设计工具，有利于增强国产计算机的市场竞争能力。     

核电材料在模拟反应堆环境中应力腐蚀破裂测试技术与性能评价

简要介绍了采用慢应变速率试验，Ｕ型弯曲和Ｃ形环试验等技术，分别对８００合金，３０４和３１６及３１６Ｔｉ不锈钢Ａ５３３Ｂ压力容器用多在模拟核反应堆环境中的应力腐蚀破裂敏感性性进行的试验研究的一些主要结果；并结合电化学测试和表面膜俄歇电子能谱分析结果进行了讨论。     

巴氏杀菌调理食品及其品质控制关键技术

归纳性地介绍了在食品工业发展进程中出现的四种调理食品的显著特点，对其卫生安全性的重要保证措施－灭菌作了一定的理论分析，并阐明了新型巴氏灭菌调理食品的品质控制关键技术。     

分析型全蒸发器在啤酒挥发性成分测定中的应用

综述了分型全蒸发器技术在啤酒发酵过程中的应用状况，并介绍了分析型全蒸发器模型结构及与之配合使用的连续多分支管。     

浅谈酶在非接触印刷废纸脱墨中的应用

简要地介绍了纤维素酶、半纤维素酶和淀粉酶在非接触印刷废纸脱墨中的研究及其应用     

Chemical leaching and magnetic properties of non-equilibrium Al(Co–Cu) powders produced by rod milling

We report upon the chemical leaching and magnetic properties of nanoscale crystalline Al_0.6(Co₂₅Cu₇₅)_0.4 alloy powders produced by rod milling. X-Ray diffractometry (XRD), transmission electron microscopy, differential scanning calorimetry, vibrating sample magnetometry, and superconducting quantum interference device magnetometry were used to characterize the as-milled and leached specimens. After 400 h of milling, only the b.c.c. phase of the intermetallic compound γ-Al_3.892Cu_6.10808 was detected by XRD. After annealing the leached specimen at 600 °C for 1 h, the nanoscale crystalline phase was transformed into the f.c.c. Cu phase, and this was accompanied by a change in the magnetic properties. The peaks of the magnetization shifted towards lower temperature with increasing external field. The temperature behavior at T_f (45 K) for direct current (d.c.) magnetic susceptibility measurements was quite different for field cooling and zero-field cooling. After cooling the leached specimen from 800 °C, magnetization increased gradually.     

绿色食品与绿色包装

介绍了食品绿色包装与环境保护的关系，探讨了食品绿色包装材料的选择及应用，食品绿色包装设计及市场价值等方面的内容。