聚丙烯改性技术进展

介绍了近年来聚丙烯改性技术研究方面的进展．研究内容包括用结晶成核剂对聚丙烯的晶型进行设计，用橡胶、矿物填料等对聚丙烯进行改性．     

均相催化水合法合成乙二醇动力学研究

在反应温度为45～75℃,NY 健化剂浓度为0.093mol/L,水比为6～10的反应条件下,对均相催化水合法合成乙二醇动力学进行了研究。测定了反应速率常数及反应过程中溶液 pH 值的变化。依据实验结果,提出了反应机理,建立了反应动力学方程,并利用 Levenberg-Marquardt 方法回归了动力学参数。研究结果表明:在 NY 催化剂存在下,均相催化水合法合成乙二醇反应对环氧乙烷浓度是一级反应,其表观活化能为71113.8 J/mol 和指前因子3.05×10~9 min~(-1)。相对直接水合法而言,NY 催化剂降低了反应的活化能,大大提高了反应速度。     

玻璃微珠改性PP和PE-LLD的加工流变行为

采用玻璃微珠改性两种基体性质显著不同的聚烯烃并对玻璃微珠的含量、粒径和复合材料加工方法对材料的加工流变行为进行了研究。结果表明：加工方法、玻璃微珠含量和粒径对聚丙烯/空心玻璃微珠(PP/GB)复合材料的熔体流动速率和转矩流变性能的影响远大于对PE-LLD/GB复合材料的影响，其中玻璃微珠含量的影响较粒径大。研究认为，无机刚性粒子填充改性热塑性聚合物时，加工方法、填料含量、几何特征等对复合材料流变特性是否发生影响，影响的程度等，更重要的是取决于基体树脂的特性。     

IFR-2000阻燃聚丙烯热性能研究

研究了用无卤膨胀型阻燃剂IFR-2000作阻燃剂的阻燃聚丙烯的热性能和阻燃性能。     

用聚丙烯粉料代粒料制塑料扁丝的探讨

概述了以聚丙烯粉料部分代替传统的聚丙烯粒料来生产塑料编织袋扁丝的新工艺，分析了捏合速度、挤出温度、弓板加热温度等因素对扁丝性能的影响。     

β晶型成核剂改性聚丙烯纤维研究

研究了含 0 .2 5 %β晶型成核剂 (酰胺化合物 )的聚丙烯 Z3 0 S及其纤维的力学性能、晶型结构和微观形态。通过纺丝 -拉伸实验和力学性能测试、广角 X射线衍射分析、SEM观察 ,发现成核改性后生成了β晶型聚丙烯 (K值约为 75 .3 % ) ,抗冲性能大幅度提高。β晶型聚丙烯在纺丝卷绕过程中发生了β晶型→α晶型转变 ,纤维中产生约 10 %微孔隙 ,改性纤维的力学性能有所降低。     

Effects of substituted aromatic heterocyclic phosphate salts on properties,crystallization, and melting behaviors of isotactic polypropylene

Nucleation effects of 2,2′‐methylene‐bis (4,6‐di‐tert‐butylphenyl) phosphate metal salts as a nucleating agent for isotactic polypropylene (iPP) were investigated with differential scanning calorimeter and polarized optical microscope, and their effects on mechanical, optical, and heat resistance properties of iPP were also studied. The results showed that monovalent metal salts of substituted aromatic heterocyclic phosphate such as sodium salt, lithium salt, and potassium salt had a good performance. With 0.2 wt % of sodium salt, lithium salt, or potassium salt incorporated into iPP, the crystallization peak temperature of iPP could be increased by 13.5, 13.6, and 15.0°C, respectively; the mass fraction of crystallinity of iPP could be increased by about 5%; and crystallization rate was enhanced increasingly. Meanwhile the tensile strength and flexural modulus of iPP could be increased by about 10 and 30%, respectively, and the clarity and heat distortion temperature of iPP could also be improved significantly. But bivalent and trivalent metal salts of substituted aromatic heterocyclic phosphate had little effect on properties of iPP. Meanwhile the morphology study showed that the addition of monovalent sodium salt could decrease the spherulite size of iPP significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4868–4874, 2006     

碱式硫酸镁晶须的合成及应用

以一定浓度的MgSO4和NaOH溶液为原料,在常温下混合,在160℃,0.5 MPa的条件下用水热法反应8 h,制备出增强阻燃材料MgSO4.5Mg(OH)2.3H2O型碱式硫酸镁晶须(MOS),探讨了反应条件对产物形貌、结构及组成的影响,初步确立了制备MOS的工艺条件。经过对复合材料的拉伸性能测试得出结论,采用MOS填充改性的聚丙烯,优于市售纳米氢氧化镁和阻燃级氢氧化镁。     

Long‐term water uptake behavior of natural fiber/polypropylene composites

Composites of different natural fibers and polypropylene were prepared and their long‐term water absorption behaviors were studied. Wood flour, rice hulls, newsprint fibers, and kenaf fibers (at 25 and 50% by weight contents) were mixed with polypropylene and 1 and 2% compatibilizer, respectively. Water absorption tests were carried out on injection‐molded specimens at room temperature for 5 weeks. Measurements were made every week and water absorption was calculated. Water diffusion coefficients were also calculated by evaluating the water absorption isotherms. Results indicated a significant difference among different natural fibers, with kenaf fibers and newsprint fibers exhibiting the highest and wood flour and rice hulls the lowest water absorption values, respectively. The difference between 25 and 50% fiber contents for all composite formulations increased at longer immersion times. Water diffusion coefficients of the composites were found to be about 3 orders of magnitude higher than that of pure PP. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

纤维素/聚乙二醇/维生素共混膜的制备与缓释性能研究

介绍了在纤维素/聚乙二醇体系中加入维生素C制备成药物缓释膜的过程,并研究了其在水中的药物缓释性能。结果表明,固液比、pH和温度这三个条件都对药物缓释有非常明显的影响。例如,药物在中性条件下的缓释一般是随着固液比的增大和温度的升高而加快的,但在高分子材料的结晶温度区域进行时也受到抑制。此外,在酸性环境中药物缓释在初始时是受到抑制而后逐渐以脉冲式进行。值得指出的是,药物缓释在碱性条件下完全不发生,并出现与缓释相反的吸附现象。