固体激光器的四能级系统密度矩阵元的演化特性

固体激光器是一个四能级系统。本文基于量子力学和Kraus算子理论,针对能级间存在跃迁的情况,利用约化密度矩阵方法,得到四能级系统密度矩阵元的演化特性。结果表明:当粒子的跃迁概率满足一定条件时,能在第二激发态与第一激发态之间形成粒子数反转,为产生激光作准备;当粒子以大概率从第二激发态辐射到第一激发态和从第一激发态辐射到基态时,产生激光。     

Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Numerical experiments of preconditioned Krylov subspace methods solving the dense non-symmetric systems arising from BEM

Discretization of boundary integral equations leads, in general, to fully populated non-symmetric linear systems of equations. An inherent drawback of boundary element method (BEM) is that, the non-symmetric dense linear systems must be solved. For large-scale problems, the direct methods require expensive computational cost and therefore the iterative methods are perhaps more preferable. This paper studies the comparative performances of preconditioned Krylov subspace solvers as bi-conjugate gradient (Bi-CG), generalized minimal residual (GMRES), conjugate gradient squared (CGS), quasi-minimal residual (QMR) and bi-conjugate gradient stabilized (Bi-CGStab) for the solution of dense non-symmetric systems. Several general preconditioners are also considered and assessed. The results of numerical experiments suggest that the preconditioned Krylov subspace methods are effective approaches solving the large-scale dense non-symmetric linear systems arising from BEM.     

Investigation of the Correlation between Texture and Microstructure on a Submicrometer Scale in the TEM

In recent years the investigation of local texture and microstructure by analysis of electron backscatter diffraction patterns (EBSP) in the SEM has become a very powerful and popular method. With the introduction of SEM with field emission guns (FEG) the spatial resolution of EBSP measurements could be enhanced from 500 nm with a tungsten emitter to better than 50 nm. This evolution of SEM techniques raises the question whether transmission electron microscopy (TEM) still has fields of application in texture research. The present article answers this question with a clear “yes” and presents three examples of investigations where TEM is indispensable. The three examples comprise the investigation of the correlation between dislocation structure and deformation texture, a study on nucleation mechanisms of recrystallization in highly deformed metals and the investigation of microtexture and microstructure in nanocrystalline materials. Together with the presentation of these cases some of the necessary measurement techniques are described briefly. It is shown that TEM has to be applied when highest spatial resolution of orientation determination and imaging and high accuracy of orientation determination are to be reached, when the three‐dimensional and quantitative characterization of lattice defects is required or when materials with a high density of lattice defects are to be investigated.     

Improvement of photon collection in Cu(In,Ga)Se2 solar cells and modules by fluorescent frequency conversion

Fluorescent photon down conversion for the improvement of the blue response of ZnO/CdS/Cu(In,Ga)Se₂ heterojunction solar cells and modules is investigated. Fluorescent dyes of the series Lumogen® F are analyzed by optical transmission and reflection as well as by photoluminescence measurements. A spectral transfer matrix formalism is introduced that allows to predict the suitability of a luminescent dye as a down-converter for a given solar cell from its absorption/emission properties. We find that Lumogen® F Violet 570 and Lumogen® F Yellow 083 as well as a combination of both yields improvements for Cu(In,Ga)Se₂ solar modules. Particularly, we find that the short circuit current density of a Cu(In,Ga)Se₂ mini-module is improved by 1.5 mA cm^− 2 when applying a varnish with a combination of Lumogen® F Violet and Yellow. About 0.5 mA cm^− 2 of this improvement is due to a reduced overall reflectance and an improvement of 1 mA cm^− 2 results from the frequency conversion by the dyes.     

Generalized null space uncorrelated Fisher discriminant analysis for linear dimensionality reduction

We propose a generalized null space uncorrelated Fisher discriminant analysis (GNUFDA) technique integrating the uncorrelated discriminant analysis and weighted pairwise Fisher criterion. The GNUFDA can effectively deal with the small sample-size problem and perform satisfactorily when the dimensionality of the null space decreases with increase in the number of training samples per class and/or classes, C. The proposed GNUFDA can extract at most C-1 optimal uncorrelated discriminative vectors without being influenced by the null-space dimensionality.     

3^n阶矩阵乘法的分块算法

针对３＾ｎ阶矩阵的乘法运行，给出了一种分块算法，其乘法运行量比常规的矩阵乘法计算方法和补零的基－２算法都有所减少。     

基体改性对C/C复合材料性能影响的研究(一)

本文从C/C复合材料的基体入手,研究了基体沥青、焦炭中添加氧化物的工艺条件及其在复合材料中的作用.结果表明,添加氧化物对基体改性,不仅能提高C/C复合材料的高温抗氧化性,也能对其它性能带来很大影响.只要控制适当的工艺条件,就可以得到高性能的C/C复合材料.     

一种基于偏振调制的单模光纤偏振漂移补偿算法

本文提出了一种单模光纤偏振漂移补偿新算法，该算法不仅适用于简单的一维调制，也同样适用于复杂的二维调制。同时该算法不再局限于极化分割式的斯托克斯接收机。这对于充分发挥偏振调制的潜力和降低系统造价，提高系统性能有着重要意义。这一算法的计算机模拟结果也在本文中给出。一些和算法有关的问题在本文中作了必要的讨论。     

锌基复合材料研究进展

评述了锌基复合材料的发展和研究概况,着重介绍了锌基复合材料的制备工艺和性能研究现状,最后对锌基复合材料的研究方向和应用前景提出了一些设想和展望。