水体系中含卟啉基团的两亲高分子的自组装行为和性质的研究

在文中合成了两种不同的卟啉单体5-(4-acryloyloxyphenyl)-10,15,20-tris(4-carboxylphenyl)porphyrinate zinc(II)(ZnAOTCPP)和5-(4-acrylo-yloxyphenyl)-10,15,20-tris(4-methoxycarboxylphenyl)porphyrinate zinc(II)(ZnMeAOTCPP),它们分别与丙烯酰胺(Acrylamide,AM)聚合得到含有卟啉基团的两亲高分子.与对应的单体相比,含有三羧酸卟啉基团的高分子在水中形成了一个新的紫外吸收峰和一个新的荧光发射峰,而含有三羧酸甲酯卟啉基团的高分子除此之外在更长波的方向上还另外出现了一个新的紫外吸收峰和一个新的荧光发射峰.随着高分子水溶液浓度的提高,高分子中卟啉基团的光谱性质的变化趋势显示高分子在水中的自组装行为可以分为分子间缔合和分子内缔合的两种情况.此外,实验结果显示含有三羧酸甲酯卟啉基团的高分子相对于含有三羧酸卟啉基团的高分子更加有利于卟啉缔合物的形成.     

Adhesion of Listeria monocytogenes to materials commonly found in domestic kitchens

The aim of this work was to investigate the adhesion of Listeria monocytogenes ATCC 15313 to glass, granite, marble, polypropylene from a bowl (PPb), polypropylene from a cutting board (PPcb) and stainless steel (SS), which are materials commonly used in kitchens. Marble and granite were chosen because they are applied as kitchen bench covers and pavements in many countries and there are no literature reports on their behaviour in terms of microbial adhesion. The effect of surface hydrophobicity and roughness on the adhesion process was also analysed. The results showed that the highest extent of adhesion of L. monocytogenes occurred to stainless steel, followed by glass and in less extent to the other materials studied. However, it was not possible to establish a correlation between surface hydrophobicity or roughness and the extent of adhesion of L. monocytogenes . The adherence of L. monocytogenes should be dependent on other factors, like the presence of exopolymers and surface charge.     

Factors Influencing the Adhesion of Microorganisms to Surfaces

Starvation, growth phase, and carbon source influenced bacterial cell surface hydrophobicity. Both the number and kind of microorganisms that colonized metal surfaces depended on the type of metal and the presence of an imposed electrical potential. No significant differences in attachment and growth of a pure culture were observed when metal surfaces were dipped in an exogenous energy source. The chemical composition of naturally occurring adsorbed organic films on metal surfaces was shown to be independent of surface composition and polarization.     

表面改性改善神华煤成浆性的研究

用化学改性与热改性结合的方法对神华煤进行改性,分析了改性前后样品的接触角和成浆性的变化。结果表明,改性后样品接触角都有所增大;表面改性能明显提高,最高制浆浓度呈先增加后缓慢下降;表面改性可以改善水煤浆浆体的稳定性,其中液体石蜡与钛酸酯混合物能显著降低水煤浆的稳定性。     

疏水性安全壳壁面的硅表面微孔结构制备

为构建疏水性安全壳内壁面涂层以提高事故中的传热能力,以Si作为功能涂层材料,在其表面上制备了不同圆孔间距及圆孔深度的微孔阵列样品以研究微米结构对表面疏水特性的影响,并对其疏水机理进行分析。结果表明,所制备的微孔样品润湿特性均符合Cassie-Baxter模型,在本征接触角为69.5°的Si表面通过微孔结构调控可显著提高疏水特性,获得了具有140°接触角的优异疏水特性样品而未进行表面化学修饰。研究结果为设计安全壳涂层材料及其表面微结构提供了技术方案,为强化核电站非能动安全壳冷却系统传热性能提供了解决思路。     

生物形态氧化铝复合高吸油树脂的合成及性能

该文以滤纸为模板,通过浸渍-高温煅烧法制得具有生物形态的氧化铝,利用乙烯基三乙氧基硅烷(A151)对所制备样品的表面进行疏水改性。利用悬浮聚合法制备了聚甲基丙烯酸丁酯-丙烯酸丁酯-苯乙烯高吸油树脂。通过正交实验优选出最佳反应条件:分散剂用量为单体质量的5%、交联剂用量为单体质量的2%、引发剂用量为单体质量的1.5%、改性氧化铝的添加量为单体质量的4%,在该条件下制备的树脂的吸收倍率较原树脂有了明显的提高,而且复合树脂能够反复使用多次。对改性前后的氧化物进行红外光谱(IR)、透射电镜(TEM)、扫描电镜(SEM)以及动态疏水性分析,并对复合高吸油树脂进行扫描电镜(SEM)和热重(TG-DTA)分析。     

Quad-cantilever microsensors with a low-cost single-sided micro-machining technique for trace chemical vapor detection

This paper presents a quad-cantilever microsensor for on-the-spot detection of ultra-low concentration chemical vapors. Compared with conventional dual-cantilever sensors, the quad-cantilever configuration can form a fully cantilever-formed Wheatstone-bridge that possesses a higher sensitivity of twofold and more balanced condition to compensate for environmental noise like temperature fluctuation or air flow. Besides, the four integrated micro-cantilevers are made of SiO₂, with each having a single crystal silicon piezoresistor fully encapsulated by SiO₂. Thus, the quad-lever sensor achieves a very low signal noise of 0.2 μV. For specific detection, sensitive molecule layer is self-assembled on two sensing cantilevers, with another two as reference. The sensors are micro-fabricated with a single-side process from the wafer front-side. With wet anisotropic etch used to release the piezoresistive cantilevers, the new fabrication technique features low-cost and high-yield. Self-assembled with a novel dual-branch specific mono-layer, about 100 ppt level trinitrotoluene (TNT) vapor has been rapidly and repeatedly detected.     

纳米二氧化锆改性聚酰亚胺薄膜的制备及性能

聚酰亚胺（PI）在工程高分子材料领域广受关注,开发新型耐高温、疏水性良好的PI薄膜材料是推动高性能高分子材料在电动汽车等高新技术领域工程化应用的重要突破口。以间苯二胺（MPD）与4,4’-(4,4’-异丙基二苯氧基)二酞酸酐（BPADA）为原料,采用原位掺杂热亚胺化合成PI薄膜,通过向聚酰胺酸（PAA）前驱液中添加纳米ZrO2粉体对聚酰亚胺薄膜进行改性,制得不同ZrO2添加量（0.77%～1.93%,以MPD、BPADA总质量为基准,下同）的复合型PI薄膜。借助XRD、SEM、EDS、FTIR及TGA对复合薄膜进行了结构和形貌表征。结果表明,与纯PI相比,ZrO2添加量为1.93%的复合薄膜初始分解温度为415℃（提高5%）,水接触角为91.7°（提高61%）,表明ZrO2对改善PI薄膜的性能具有重要作用。     

The characteristic curvature (Cc) definition and its use in assessing Cc for single ionic surfactants

The hydrophilic–lipophilic-difference (HLD) is a set of empirical equations that correlate the formulation conditions at phase inversion (HLD = 0). Based on partition studies for nonionic surfactants, the HLD can be interpreted as a normalized chemical potential difference between the surfactant dissolved in water and oil. The net-average curvature (NAC) model extrapolates this interpretation into a curvature form that has been used to fit and predict the phase behavior of surfactant-oil–water (SOW) systems. The curvature interpretation led to renaming the HLD surfactant parameter, sigma (σ), as the characteristic curvature (Cc). This work tests the validity of the curvature interpretation of the HLD, and the Cc concept, for single ionic surfactants and the use of this concept as a method to assess the Cc without the use of reference surfactants or alcohols. To this end, the net curvature of six anionic and two cationic surfactants was evaluated from solubilization data at the characteristic condition of 25°C, no added cosolvent, in the presence of an oil mixture with equivalent alkane carbon number (EACN) of zero, and as a function of salinity. These studies showed that the original HLD equation for ionic surfactant could not be interpreted as chemical potential or curvature because a salinity prefactor (coefficient) “bi” was missing. The revised equation, HLD_bi = bi∙ln(S)-k_bi∙EACN+Cc_bi -a_Tbi∙(T-25°C), could now be interpreted as a curvature expression, and it was demonstrated that Cc could be obtained from curvature using the expression Cc = Cc_bi/bi. This single surfactant method produces uncertainties that, for most surfactants, ranged from 0.2 to 1 Cc units, similar to the uncertainty obtained with the conventional method of Cc determination using mixtures of test and reference surfactants.     

Physicochemical Properties and Functionality of Rice Bran Protein Hydrolyzate Prepared from Heat-stabilized Defatted Rice Bran with the Aid of Enzymes

ABSTRACT: Molecular size, thermal properties, hydrophobicity, nitrogen solubility, and emulsifying and foaming properties were determined for protein products from heat‐stabilized defatted rice bran. The freeze‐dried and spray‐dried proteins had molecular sizes between 6.5 to 66.2 kDa; denaturation temperatures of 84.1 and 84.6 °C, enthalpies of 2.5 and 2.37 J/g, hydrophobicities of 20677 and 22611, maximum solubilities of 66.3% and 66.1% at pH 12.0, emulsifying capacities of 0.19 and 0.18, emulsion stabilities of 16.5 and 17.3 min, foam capacities of 4.0 mL and 4.2 mL, and negligible foam stabilities. These results demonstrated that the extracted rice bran protein has potential as a nutraceutical ingredient in food applications.