Ni3Al合金中晶界与位错交互作用的研究

运用嵌入原子法势函数和静态驰豫最陡梯度的计算方法,原子模拟了Ni_3Al合金中晶界与位错的交互作用.主要研究了晶界与位错交互作用的能量特征、晶界结构单元的畸变行为和晶界附近位错的核心结构,并分析讨论了各种因素对它们的影响以及与Ni_3Al晶界韧脆行为之间的关系     

97cm彩电前壳注射模设计

介绍大屏幕彩色电视机前壳注射模结构，重点介绍侧抽芯大滑块的设计，顶出机构和进浇方法的改进。     

汽车用ABS壳体注射模设计

通过对汽车ABS壳体的结构和工艺性分析，采用碟形弹簧，对产品进行圆周内四面抽芯，使模具结构简单紧凑，经生产验证，模具结构稳定可靠，效果显著，对类似产品的注射模有较好的参考价值。     

水溶性芯模材料的制备与性能研究

采用黄糊精、空心玻璃微珠与尿素等材料,通过共混模压工艺制备了新型的水溶性芯模材料,对其进行了压缩强度、水溶性等性能测试,分析了影响该芯模材料性能的因素。结果表明,将空心玻璃微珠的用量控制在总量的10%左右,尿素的用量控制在总量的6%左右,可获得性能最优的水溶芯模材料;所制得的水溶芯具有强度高、表面光洁、水溶性好、性能稳定、成本低等优点。     

金属闪光外墙乳胶漆的研制及性能研究

以丙烯酸酯及有机硅单体为原料合成了核-壳型硅丙乳液,用自制分散剂将闪光铝粉分散成水性闪光铝粉浆,并成功分散于硅丙乳液中,加入进口助剂,配制成水性金属闪光外墙乳胶漆.讨论了基料的玻璃化温度、单体的加入方式、引发剂、乳化剂、反应温度、聚合工艺和pH等对乳胶漆性能的影响.     

沥青混凝土心墙坝渗漏检测及防渗体系修复综述

针对部分沥青混凝土心墙坝出现渗漏情况,为判定沥青混凝土心墙坝渗漏的部位及通道,需采用多种检测方法对坝体渗漏情况进行综合分析和判定。列举了多个工程应用实例,对沥青混凝土心墙坝渗漏检测方法如水下声纳检测、孔内彩电观测、示踪连通试验、坝体内水位分析和物探检测,以及混凝土防渗墙和控制灌浆修复坝体防渗体系方案及其影响因素进行了综述,以期为类似工程提供借鉴。     

Multi-Kepler GPU vs. multi-Intel MIC for spin systems simulations

We present and compare the performances of two many-core architectures: the Nvidia Kepler and the Intel MIC both in a single system and in cluster configuration for the simulation of spin systems. As a benchmark we consider the time required to update a single spin of the 3D Heisenberg spin glass model by using the Over-relaxation algorithm. We present data also for a traditional high-end multi-core architecture: the Intel Sandy Bridge. The results show that although on the two Intel architectures it is possible to use basically the same code, the performances of a Intel MIC change dramatically depending on (apparently) minor details. Another issue is that to obtain a reasonable scalability with the Intel Phi coprocessor (Phi is the coprocessor that implements the MIC architecture) in a cluster configuration it is necessary to use the so-called offload mode which reduces the performances of the single system. As to the GPU, the Kepler architecture offers a clear advantage with respect to the previous Fermi architecture maintaining exactly the same source code. Scalability of the multi-GPU implementation remains very good by using the CPU as a communication co-processor of the GPU. All source codes are provided for inspection and for double-checking the results.     

Dynamics of fluid circulation in coupled free and heterogeneous porous domains

Fluid flow in coupled free and porous domain, particularly when the porous medium is heterogeneous, is encountered in many hydro-environmental conditions, e.g., leakage from underground pipe, combined groundwater lake-subsurface interactions. One of the most difficult problems in the study of coupled flow behaviour has been the development of a universally applicable modelling scheme for combining the flow regimes. This is because the free/porous interfacial properties (e.g., shear-stress; velocity slip) that govern the coupled flow behaviour are difficult to determine experimentally under hydro-environmental conditions. On the other hand, the implications of various forms of heterogeneity in the porous media properties can be very different on the fluid-flow behaviour. Difficulties may also arise in direct coupling of the model equations that govern the fluid flow in the individual regions (e.g., Navier-Stokes for free-flow region and the Darcy's equation for the porous flow region). Consequently, models of coupled free and porous flow for hydro-environmental conditions are not very well developed at the moment. While there are some indications that fluids in coupled free and porous domains may circulate (i.e., development of flow cells), there is a lack of appropriate 3D analysis on how heterogeneities in porous media may affect such flow patterns. In this paper, we aim to analyse how porous media heterogeneity affects the dynamics of flow circulation in the porous side of a coupled free and porous domain. For this purpose, we analyse flow patterns in several model domains made up of two porous layers with differing permeabilities. The governing model equations are discretised and solved using the standard finite volume method on a staggered cell-centred mesh. The temporal discretisation is done using the explicit method. An in-house graphical user interface (GUI) has been created specifically to aid in the visualisation of otherwise complex flow patterns. The GUI contains many post-processing options and provides a comprehensive tool for the analysis of hydrodynamics and contaminant motion (not discussed in this paper) in coupled free and porous flow domains. This GUI is described in this paper briefly. The effects of altering the aspect ratio (i.e., multi-scale) of the domain on the coupled flow pattern have also been discussed.     

核壳型二氧化钛复合纳米材料研究进展

核壳材料由中心核和外部壳层组成，因其组成、大小、结构的不同，性能优于普通材料。二氧化钛具有优异的光、电和化学等特性可作为理想的核壳材料。从二氧化钛作为核壳型复合纳米材料的核、壳及核壳结构的载体3个方面出发，介绍了核壳型结构的二氧化钛复合纳米材料的分类、制备、性质及应用概况，并对其发展前景及存在问题进行了简要概述。     

皮革涂料用丙烯酸酯核-壳乳液的研制

采用种子乳液聚合法，以交联型软性聚合物为核，交联型硬性高聚物为壳，合成了具有优异耐寒性及高温抗回粘性聚合物。讨论了乳化剂种类及应用、核／壳比等对聚合物性能的影响。