DCPD和PET合成不饱和聚酯的研究

探讨了用双环戊二烯和聚对苯二甲酸乙二醇酯废料合成不饱和聚酯树脂的方法：PET用二元醇醇解后，加入顺入烯二酸酐和DCPD，在80－120℃条件下滴加与DCPD等量的水进行反应，反应大约2.5h，加入其它成分，升温酯化直至反应完全。PET一定时，DCPD的含量影响不饱和聚酯同苯乙烯的互溶性和固化过程，DCPD和PET合成的不饱和聚酯树脂与标准树脂相比较，机械性能好，空干性好，解决了环境污染，具有很好的经济效益。     

吹风气余热回收锅炉在我厂的应用

介绍了吹风气余热回收锅炉在兖矿鲁南化肥厂的应用情况。实践证明，系统运行稳定，取得了良好的经济效益。     

生物接触氧化法处理制革综合废水中的常见问题及对策

探讨了生物接触氧化法处理制革综合废水时常见的出水水质波动大 ,硫化物、三价铬、悬浮物浓度高 ,易产生大量泡沫和曝气效果不理想等问题 ,提出了相应的解决措施。经制革厂运用实践证明 :改进后的生物接触氧化法处理制革综合废水是较为理想的方法     

Continuous precipitation of calcium sulfate dihydrate from waste sulfuric acid and lime

Precipitation of calcium sulfate dihydrate, gypsum, from (i) a pure sulfuric acid/lime suspension and (ii) a waste sulfuric acid/lime suspension in a continuous pilot plant in the temperature range from 40 °C to 80 °C was studied. It was observed that in the case of waste sulfuric acid with a high content of Mg²⁺ and Fe²⁺ ions, several hours after the beginning of the precipitation, partial dissolution of the product and modification of the crystals from needle‐ and plate‐like to agglomerated structures occurred. It is suggested that the secondary changes occur due to the increased concentration of Mg²⁺ and Fe²⁺ ions in the reactor. Below 60 °C, and above 70 °C plate‐like and needle‐like single crystals respectively were formed. The mean size (d₅₀) of the crystals was found to increase with increasing temperature and decrease with the initial concentration of lime. Gypsum produced between 70 °C and 80 °C is suitable for further processing for construction plaster. In a precipitation process with pure sulfuric acid only single perfect needle‐like crystals occurred. Copyright © 2005 Society of Chemical Industry     

用于PET薄膜回收的螺杆设计

根据PET薄膜的特点和高分子熔融态流动理论，分析了挤出回收用螺杆的各段结构，及螺杆参数选择，设计出大长径比、深槽、双排气、高效专用螺杆。     

JETS,PLUMES AND BUOYANT JETS IN STATIC ENVIRONMENT

Turbulence represents an essential aspect in atmospheric and oceanic circulations.In particu-lar,it is a preponderant factor in the dispersion of pollutants of artificial or natural origin.Thevertical turbulent jets,plumes and buoyant jets discharging into static environment is one of themost important and basic flow patterns related with the environment pollution.These flows havenumerous important applications,for example,thrust augmentors,waste disposal plumes fromstacks and combustion systems,and significant problems of turbulent diffusion.     

Coliphage prevalence in high school septic effluent and associated ground water

At the present time, somatic and male-specific coliphage and human enterovirus groups are being considered as indicators of possible pathogenic human enteric virus contamination from fecal contamination. A primary attribute for any indicator of fecal contamination is its prevalence at the source and in associated ground water. It must be consistently found in the source material at concentrations that are measurable with available techniques. Over a period of ten months, male-specific and somatic coliphage ranged from 7000 to 4,000,000 PFU/L in the effluent from a multi-user septic-tank. Unlike the values determined for septic-tank effluent, coliphage concentrations measured in ground water over this same period only varied by five-fold. Coliphage concentration in ground water under the down-gradient edge of the drainfield contained 1000 PFU/L. This concentration decreased at −1 log₁₀/5 m during 17.4 m of ground-water transport. From these data, coliphage concentrations in septic-tank effluent seem sufficient to allow their use as indicators of fecal contamination in ground water.     

用废旧橡胶生产精细胶粉的空气涡轮制冷低温粉碎法

利用先进的空气涡轮制冷系统，在低温条件下，将废旧橡胶进行冷冻，粉碎，制成60目以上细度的精细胶粉，此法简称ATCG法，它的冷冻能耗成本仅为国际上通用的液氮法的十分之一，整个工艺过程不产生二次污染，为精细胶粉的制取开辟了一条新途径。     

以废钡渣为原料制取氯化钡的研究

本文研究了以直接耐晒黑Ｇ染料生产中的废钡渣为原料制取氯化钡的方法，氯化钡的得率达到废钡渣量的７０．９９％，产品质量达到一级品的标准。     

PC／PET共混物的非等温结晶动力学

采用等速变温ＤＳＣ法对ＰＣ／ＰＥＴ共混体系的非等温结晶动力学进行了研究，结果表明，从玻璃态结晶时，随着ＰＣ含量的增加，ＰＥＴ组分的结晶速率先增加后降低。耐从熔体结晶时，体系的结晶速率随着ＰＣ含量的增加而增加，讨论了ＰＣ对ＰＥＴ组分结晶过程的影响。