基于视差与分层渲染的立体显示效果评价研究

本文在充分分析国内外立体显示技术评价方法的基础上,提出了利用视差和分层渲染的方法进行立体显示效果的评价,结果表明其对于自由立体显示评价可以得到较明确的分析结果,最后对研究前景进行了必要的探讨。     

挤压变形对Mg95Zn4.3Y0.7合金组织和性能的影响

研究了在250℃、不同挤压比下挤压变形对Mg95 Zn4.3 Y0.7合金组织及性能的影响。结果表明，Mg95 Zn4.3 Y0.7经过挤压变形后，合金中晶界处的共晶相破碎，弥散分布至晶粒内部，并且晶粒显著细化。同时，随着挤压比的增大，晶粒细化程度增加，合金的力学性能单调增加。当挤压比为16时，合金晶粒尺寸为5-8μm，抗拉强度为288.9MPa，显微硬度HV值为117.8。     

滑轨升降拉钢台架的结构、强度、钢度分析

介绍了攀钢轨梁厂钢轨收集装置——滑轨升降式拉钢台架的结构,并计算了主要受力构件滑轨的强度和刚度。     

支持向量机及其在径流预测中的应用

给出了支持向量机方法(SVM)的思路、特点及关键之处,探讨了SVM在径流预测中的可能性,并与基于遗传算法的门限回归模型(TR) 进行了对比分析。径流预测实例分析表明,在拟合阶段,SVM模型要好于TR模型;在预留检验阶段,SVM模型与TR模型接近。同时SVM模型适合于小样本情况且能达到全局最优。SVM模型用于径流预测是可行的、优越的。     

Exploring the methods on improving CH4 delivery performance to surpass the Advanced Research Project Ageney-Energy target

CH_4 storage associated with adsorbed natural gas(ANG) technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E) targeted deliverable capacity of 315 cm~3·cm~(-3)(STP), hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target. Moreover, recent theoretical research reveals that the target is beyond the possibility that real materials can be designed. To get rid of the awkward situation, we make attempts on investigating the CH_4 delivery performance under other operation conditions. Methods of raising the discharge temperature(to infinite high) or elevating the storage pressure(to 25 MPa) have been proved to show limited effectiveness. In this work, it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy. By taking 280 Co RE(computation-ready, experimental) COFs(covalent organic frameworks) as ANG materials, when reduce the storage temperature to 190.6 K, the highest deliverable capacity can reach 392 cm~3·cm~(-3)(STP), and16.1% Co RE COFs can surpass the target. The target is also achievable when storage at 220 K. Structure performance relationships study shows strong correlation between deliverable capacity and void fraction. Hence, 120 hypothetical COFs are generated to ascertain the optimum void fraction. In addition,the performance of 2 D-COFs can be greatly enhanced by increasing the interlayer spacings, e.g. CH_4 deliverable capacity(storage at 190.6 K) of ATFG-COF can be improved from 239 to 411 cm~3·cm~(-3)(STP) when interlayer spacing is enlarged to 1.65 nm.     

充油SEBS的结构、力学性能和紫外辐照稳定性

自制了一种中间基的苯乙烯-乙烯/丁烯-苯乙烯三嵌段共聚物(SEBS)弹性体用填充油,并从分子结构及微相结构上分析了线型和星型SEBS充油体系的力学性能、紫外辐照稳定性与其结构的关系。通过小角X射线散射(SAXS)、透射电子显微镜(TEM)表征了SEBS充油体系的微观结构,揭示了SEBS分子结构是影响充油体系微观结构的主要因素,且软硬段电子密度差以及PS相间距越大,SEBS的微相分离程度越高。结合Instron万能材料试验机的测试结果,发现SEBS微相分离程度高有利于充油体系力学性能的提高。通过傅里叶红外光谱(FTIR)研究了经紫外辐照后SEBS体系的化学结构变化,结果显示,经紫外辐照后的体系均在1700~1740 cm-1、1800 cm-1附近出现吸收峰,且吸收峰强度越大,力学性能下降得越快,表明氧化降解是造成SEBS体系力学性能下降的主要因素。     

A dual-stimuli-responsive intelligent layered lanthanide hydroxide for application in information security and latent fingerprint identification

With the rapid changes in the field of information, the research and development of optical storage materials with high security and large storage capacity are particularly important in the development of contemporary society. However, conventional memory materials with static fluorescent outputs have the disadvantages of easy simulation and forgery, which limits their practical application in the protection of confidential information. In this research, a dual-stimuli-responsive intelligent fluorescent material based on Tb³⁺ and Eu³⁺ ions doped layered lanthanide hydroxide (LYH:Eu_xTb_1–xDPA) was fabricated, which can realize reversible multi-color luminescence conversion (from green to red) by varying the pH and temperature. Combined with the Morse code and security pattern, the multiple encryption and decryption of confidential information and anti-counterfeiting can also be realized. Therefore, the obtained intelligent fluorescent material has a great application prospect for information security. In addition, due to the excellent color tunability, the material can provide the possibility to obtain potential fingerprints with high contrast and no background interference on different color substrates. The unique dual-stimuli-responsive behavior of this material provides more ingenious design inspiration for the design of multi-color intelligent fluorescent devices.     

重型桶装物品搬运码垛机器人的设计与研究

阐述了搬运码垛机器人的机构组成、工作原理，讨论了以可编程控制器为核心的机器人控制系统，分析了起升机构的动态响应。该机器人具有结构精巧、控制可靠、运行平稳、价格低廉的特点，适合于企业、仓库、码头等推广使用：     

锰对低铬白口铸铁组织及硬度的影响

系统研究了Ｍｎ对水平连铸低铬白口铸铁铸态及正火态组织和硬度的影响。结果表明，Ｍｎ＞２．０％之后对组织有较大影响，由于出现（Ｍ＋Ａ）组成物，使基体硬度显著提高，这将大大改善了低铬白口铸铁中碳化物与基体硬度的相对关系。试验证实，Ｍｎ＞３％之后明显改善硬度分布均匀性。还讨论了使低铬锰白口铸铁具有最佳综合性能的合理含Ｍｎ量范围     

UOE焊管翻板机的研制

介绍了自行设计的翻板机在UOE焊管生产线上的应用及效果,简述了该设备的工作机理、设备组成、主要技术参数及主要机构设计。实际应用表明,该翻板机在翻板过程中无冲击和噪音,运行平稳可靠,操作方便,可有效防止外观不合格钢板投入焊管生产。