数据集市技术浅析

数据集市是当前数据仓库建设的重要环节,本文通过对目前某电信的数据现状进行分析,给出了两种数据集市的建设方案,并分别对两种方案特点进行了描述。解决了电信所遇到的数据问题。     

基本圆构建简单图形几何变换的研究

随着科学技术的进步,计算机广泛应用到各个领域和行业,二维基本图形是计算机图形学表示复杂图形的基础,利用高效率的二维图形变换方法尤为重要。基于二维图形的基本变换规则提出新方法,对基本图形的平移变换、比例变换、旋转变换等做出改进,主要论述简单二维基本图形的变换,例如三角形、矩形和圆形,尽可能统一到＂基本圆＂中进行处理和变换。     

关于出现网的S切

出现网是研究Petri网的进程的工具,而出现网的S切又是研究进程的重要概念。讨论S切的基本性质：定义并证明S切M在E的元素e的作用下发生的变换M→u[e]=（u-·e）Ue·以及发生变换的条件。定义并证明S切u在E的元素e的反作用下发生的变换v→v[e-1]=（v-e·）U·e以及发生变换的条件;证明对于任意S切u有u[e][e-1]=u,对于任意S切v有v[e-1][e]=v。证明每一个S切u（≠w1）都能够被某一个e作用,每一个S切v（≠W0）都能够被某一个e反作用。     

如何充分发挥党员的先锋模范作用

开展"一转双创"是扎实开展"共建美丽幸福油田"活动的助推器。广大党员只有在实践党的宗旨上发挥共产党员的先锋模范作用,在提高专业技能上发挥共产党员的先锋模范作用,在争创一流业绩上发挥共产党员的先锋模范作用,在道德情操上发挥共产党员的先锋模范作用,才能在工作岗位中建功立业,起到中流砥柱和先锋模范作用,为实现企业内涵式发展,共建和谐企业做出贡献。     

炉窑的节能环保系统改造

介绍了对厂内工业炉的节能环保系统的改造，不但实现了节能降耗，而且大大改善了工厂的生态环境。     

普通车床的数控改造

介绍了一种利用SKY数控系统将普通车床改造成数控铣床的原理和办法。此法成本低，机床精度高，具有较大的社会效益和经济效益。     

通用液压拉深机控制系统的改造

分析了板材液压成形相关技术，介绍了一种在现有通用液压拉深机的基础上，增加计算机控制系统，以低成本改造出适合于板材液压成形的装备的方法。     

Austenite stability in Fe–Mn–Si-based shape memory alloys

The stability of austenite in a number of Fe–Mn–Si-based shape memory alloys has been investigated. It was found that a grain boundary precipitate of BCC structure is formed over a wide range of alloy compositions and heat treatment temperatures. This grain boundary phase has been identified as the chi (χ) phase. Although up to 3 vol.% of the grain boundary precipitate was generated by isothermal aging in the range 500–800 °C, it was found not to markedly affect the mechanical properties or the shape memory effect. Nano-indentation indicated that the hardness and strength of the parent and precipitate phase are very similar, as are their compositions.     

β-phase transformation and thermoelectric power in FeSi2 and Fe2Si5 based alloys containing small amounts of Cu

The effects of Cu addition on the β phase formation rate and the thermoelectric power in various FeSi₂ and Fe₂Si₅ based alloys was examined. The peritectoid reaction (a+→β) in FeSi₂ alloys was initially enhanced by the addition of Cu but it became slower for longer annealing times. The retained metallic ε was harmful for the thermoelectric power. The inherent thermoelectric properties of (FeSi₂)_99−XMn₁Cu_X (X=0–1.O at.%), (FeSi₂)_99−X Co₁Cu_X (X=0–1.0 at.%) alloys were attained after the elimination of ε. In the case of eutectoid reaction (→β+Si). Differential thermal analysis, X-ray diffraction and microscopic observation clearly confirmed that the eutectoid reaction rate was drastically enhanced by the addition of a small amount of Cu and its rate decreased with decreasing Cu content. The rate also depends on the annealing temperature and reached a maximum at about 1073 K for most alloys. The addition of only 0.1 at.% Cu was still very effective even in Mn or Co doped alloys. The thermoelectric power of these alloys increased very quickly with annealing time. Their final values decreased with Cu content and saturated at 0.2 at.% Cu. The value of the 0.1 at.% Cu added alloy was higher than that of both the conventional p- and a-type FeSi₂ based alloys. These results suggest that the Fe₂Si₅ alloys with a small amount of Cu may be attractive as new thermoelectric materials.     

压应力对Cr-Mo钢连续冷却贝氏体相变的影响

采用Gleeble-1500热模拟试验机测量了Cr-Mo钢在1-90℃／s的冷却速度下奥氏体连续冷却过程中的温度．膨胀曲线，用origin软件进行数据处理，获得了实验钢的CCT曲线；同时测量了施加轴向载荷为0、40MPa、80MPa和120MPa的压应力时奥氏体连续冷却过程中的温度．膨胀曲线，冷却速度分别为50℃／s、70℃／s和90℃／s。利用杠杆定律，根据不同温度下的膨胀量计算得到贝氏体相变动力学曲线，研究了压应力对贝氏体相变动力学和贝氏体相变温度的影响。结果表明，在以冷却速度为50℃／s和70℃／s连续冷却时，压应力抑制前期阶段的贝氏体相变，促进后期阶段的贝氏体相变；在以冷却速度为90℃／s连续冷却时，压应力对整个贝氏体相变过程都有促进作用，特别是应力较大时；压应力使贝氏体相变开始温度Bs升高，贝氏体相变终了温度Bf降低。