m,m′-二氨基二苯酮与均苯四酸二酐的微波辐射聚合

研究 m,m′-二氨基二苯酮 (m,m′- DABP)与均苯四酸二酐 (PMDA)的缩聚及亚酰化 ,并运用微波辐射和常规加热两种方式对反应进行了比较。考察了微波辐射时间 (功率 )、单体浓度、单体配比和温度等因素对缩聚物的特性粘数、转化率的影响。用红外光谱对亚酰化度进行了表征 ,并用简并四波混频技术首次测量了该缩聚物的三阶光学非线性极化率系数及其响应时间。实验结果表明 ,微波辐射对提高聚合物的特性粘数和转化率都有显著作用 ;合成的缩聚物具有较大的三阶光学非线性极化率系数 (聚酰亚胺的 χ(3) =1.642× 10 -13 esu)和较快的时间响应 (19ps     

具有减少辨识参数的随机多变量极点配置自适应控制器

本文提出了一种新的限制输出个数减少随机多变量自适应控制中辨识参数的方法，并给出了减少辨识参数的极点配置自适应算法。虽然采用ｎ个输入１个输出的减少辨识参数的模型来设计控制器，但所提出的控制器能够保证被控系统的几个输出跟踪参考输入信号，仿真结果表明，所提出的方法是成功的。     

On the boundary-layer control through momentum injection: Studies with applications

The concept of moving surface boundary-layer control, as applied to a Joukowsky airfoil, is investigated through a planned experimental programme complemented by numerical studies. The moving surface was provided by rotating cylinders located at the leading edge and/or trailing edge as well as top surface of the airfoil. Results suggest that the concept is quite promising, leading to a substantial increase in lift and a delay in stall. Depending on the performance desired, appropriate combinations of cylinder geometry, location and speed can be selected to obtain favourable results over a wide range of angle of attack. Next, effectiveness of the concept in reducing drag of bluff bodies such as a two-dimensional flat plate at large angles of attack, rectangular prisms and three-dimensional models of trucks is assessed through an extensive wind tunnel test-programme. Results show that injection of momentum through moving surfaces, achieved here by introduction of bearing-mounted, motordriven, hollow cylinders, can significantly delay separation of the boundary-layer and reduce the pressure drag. The momentum injection procedure also proved effective in arresting wind-induced vortex resonance and galloping type of instabilities. A flow visualization study, conducted in a closed-circuit water tunnel using slit lighting and polyvinyl choride tracer particles, adds to the wind-tunnel and numerical investigations. It shows, rather dramatically, the effectiveness of the moving surface boundary-layer control (MSBC). The Sabita Chaudhury Memorial Lecture The models were fabricated in the Mechanical Engineering Workshop. The assistance of M/s E Abell, P Hurren and D Camp in the design and construction of the models is gratefully acknowledged. The investigation was supported by the Natural Sciences and Engineering Research Council of Canada, Grant No. A-2181.     

Effect of bismuth replacement at barium site in Y-Ba-Cu-O system

X-ray diffraction, electron paramagnetic resonance, microwave absorption and resistivity measurements were carried out on YBa_2−x Bi _x Cu₃O₇ (0≤x≤0·5) superconductors in order to study the effect of bismuth on the structural and superconducting properties. A decrease in sintering temperature increased the amount of impurity phase. Transition from an orthorhombic (superconducting) phase to tetragonal structure produced no significant change in EPR zero-field signal at liquid nitrogen temperature (LNT). The non-resonance signal height decreased on higher concentration of bismuth. Sintered YBa_2−x Bi _x Cu₃O₇ superconductor had a strong EPR zero-field signal at LNT. We have evaluated particle size from XRD and EPR studies. The average particle size was about 0·4μm.     

微波介电陶瓷与微波磁介电陶瓷

微波陶瓷的应用越来越受到人们的重视。文章概括介绍了二元系微波介电陶瓷ＢａＯ－ＴｉＯ２和微波磁性陶瓷ＢａＯ—Ｆｅ２Ｏ３，以及三元系微波磁介电陶瓷ＢａＯ—Ｆｅ２Ｏ３—ＴｉＯ２的研究情况，并对预期进展作了展望。     

定向能武器技术发展的回顾与展望

本文综合介绍了定向能武器的技术发展水平和未来发展趋势。     

项重写系统的并行实现方案

项重写系统的并行归约可以提高归约的效率，在无共享内存的Ｔｒａｎｓｐｕｔｅｒ网络上实现时要考虑任务的分配，项的拼装，归约任务的控制等问题，其中怎么样减少机间的机内进程的通信慢提高系统效果的关键。本文从控制方式角度讨论在不同拓扑结构的Ｔｒａｎｓｐｕｔｅｒ网络上实现项重写系统的方案，重点介绍基于树形结构下的控制方法，进程安排和通讯形式。     

宁夏南部山区水库减淤加固措施

对宁夏南部山区中小型水库淤积情况进行分析、研究和总结,提出了水库减淤加固的防治措施,为宁夏中小型水库经济效益的发挥和减少水土流失,改善生态环境提供参考依据.     

CO2 abatement by co-firing of natural gas and biomass-derived gas in a gas turbine

In this work, a possible way for partial CO₂ emissions reduction from gas turbine exhausts by co-firing with biomass is investigated. The basic principle is the recirculation of a fraction of the exhausts (still rich in oxygen) to a gasifier, in order to produce syngas to mix with natural gas fuel. As biomass is a CO₂ neutral fuel, the fraction of replaced natural gas is a measure of CO₂ removal potential of the powerplant.