Fatty acid variation among U.S. Runner-type peanut cultivars

Fatty acid composition was determined among seven U.S. runner-type peanut (Arachis hypogaea L.) cultivars: Florunner, Sunrunner, GK-7, Southern Runner, Sunbelt Runner, Okrun, and Langley. Significant year and cultivar differences were found within these fatty acid profiles. Southern Runner had the best oleic to linoleic ratio and iodine values; whereas Florunner, Sunrunner, and Langley were the highest in unsaturated and lowest in saturated and long-chain fatty acids. For the future, breeding programs need to continue developing peanut cultivars with improved oil quality.     

Synthesis of Sn-Incorporated Folded Sheets Mesoporous Materials (Sn-FSM-16)

Sn-incorporated folded sheets mesoporous materials (Sn-FSM-16) with various contents of Sn were synthesized by using a mixture of water glass, SnCl₄ and NaOH as starting materials. Hexadecyltrimethyl-ammonium chloride (surfactant) was used to intercalate into the layered silicate. The reaction process was followed by measurements of XRD patterns of intermediates. The Sn-FSM-16 was formed via the following mechanism: (1) layered silicates such as - - and -Na₂Si₂O₅ were formed as intermediates by the calcination of the mixture of the starting materials; (2) the surfactant was intercalated into the layered silicates; (3) the surfactant-silicate complex with hexagonal structure was obtained as a precursor of Sn-FSM-16; (4) the precursor was calcined to decompose the surfactant in the interlayer and was changed to Sn-FSM-16. The structural aspect of Sn in Sn-FSM-16 was studied by XPS profiles of Sn 3d _5/2 and Si_2p, ²⁹ Si MAS NMR and FTIR. The content of Sn in Sn-FSM increased with increasing concentrations of both Sn and NaOH in the starting materials. The surface area of Sn-FSM-16 decreased with an increase of Sn content in Sn-FSM (1160–620 m²/g).     

野生植物金银忍冬营养成分的测定

对野生植物金银忍冬的营养成分进行了分析,结果表明,金银忍冬中含有至少17种氨基酸,丰富的维生素、矿质元素及其它多种营养成分.为开发利用植物资源提供了科学依据.     

Crystallization and dissolution behavior of l(+) calcium and zinc lactate in ethanol-water solvent

Crystallization and dissolution behavior of L(+) calcium and zinc lactate in 50% ethanol-water solution was studied. The effects of stirring, standing, ultrasonic wave, and temperature on the crystallization of L(+) calcium and zinc lactate were evaluated. It was found that standing had a positive effect on crystallization of L(+) calcium and zinc lactate, while stirring promoted dissolution of crystallized particles and resulted in high residual concentration in mother liquor. The application of ultrasonic wave did not influence much on crystallization process. L(+) calcium and zinc lactate crystallized easily at 5 ‡C; however, complete crystallization took more than 72 hours. These two salts dissolved rapidly and reached equilibrium within 1 hour.     

回用水对冷却水系统316L不锈钢的腐蚀

城市污水回用作循环冷却水系统,讨论了NH3-N、COD、Cl-、SO42-等因素对316L不锈钢耐腐蚀性的影响。极化曲线表明:当NH3-N的质量浓度超过18 mg/L时,NH3-N促进了不锈钢的点蚀;COD对316L不锈钢的点蚀并无多大的影响;Cl-促进点蚀,而SO42-的质量浓度小于300 mg/L时,SO42-对其点蚀有缓蚀作用。     

天然多孔灯心草对柴油和机油的吸附实验研究

研究了天然多孔介质材料灯心草对水中柴油、机油吸附性能，结果表明：天然多孔介质材料灯心草对水中悬浮油的静态吸附在室温下饱和吸附倍率分别为27．04和18．13；多孔灯心草在适宜的填充密度下，对油相动态吸油率为86％和88％。     

与低计算复杂度解映射相结合的16APSK星座优化

提出一种在新的简化的解映射方法下,以星座图上所有信号点距离解映射门限的最小距离的最大化为目标函数的星座图优化方法。仿真比较了在优化设计的星座映射下,传统的解映射算法和所提出的解映射的误码性能。仿真结果表明,所提出的星座图优化设计方法在简化的解映射方法下具有良好的性能;简化的解映射算法在大大降低计算复杂度的情况下,在误比特率为10-4时,SNR损失了约1 d B。     

Mussoorrie rock phosphate-pyrite mixture as phosphate fertilizer

Mussoorrie rock phosphate (MRP), MRP + pyrite (25% by weight), diammonium phosphate (DAP), ammonium polyphosphate (APP) and nitrophosphate (NP) were compared in a field experiment as fertilizers for wheat. At 20 kg P ha^–1, MRP was only 6 per cent as effective as DAP. However, when it was mixed with pyrite, the efficiency of MRP increased to 64 per cent at 20 kg P ha^–1 compared with 97 per cent at 40 kg P ha^–1. The P requirement for a targeted yield for 4.5 t ha^–1 decreased from 39.4 kg P ha^–1 as MRP to 23.7 kg P ha^–1 as MRP + pyrite. Of the other P fertilizers studied, NP was as effective as DAP, whereas APP was 9 to 37 per cent more effective than DAP. However, the P requirement as DAP, NP and APP for a targeted yield of 4.5 t ha^–1 was similar (11 ± 0.5 kg P ha^–1).     

R-卡尼丁的合成和改进

以环氧氯丙烷为原料合成了 ( R,S) -卡尼丁 ,用二苯甲酰 - L-酒石酸对其进行了拆分 ,对反应和拆分条件进行了优化 ,并用氧化还原法实现了 S-卡尼丁的消旋化 ,使其可以回收利用。     

Increasing urea-N efficiency for transplanted lowland rice by pneumatic injection: Yield and economics at the farm level

To increase the fertilizer-N efficiency in lowland rice (Oryza sativa L.) cultivation, new management practices are needed. Main cause of the present low efficiency is the low N recovery by plants, as a considerable part of the N applied is lost; deep placement techniques improve the recovery. A pneumatic injector, with which urea prills can be point-placed at a depth of 5–10 cm in paddy soils, was tested in 38 on-farm trials in 1989/90, mostly during the wet season. The experiments, located in Africa and Asia, focussed on differences in grain yield between conventional methods of broadcasting urea and injection by the pneumatic injector, at recommended N-rates. The study shows that the pneumatic injector is effective as a tool to improve the N fertilizer efficiency. The average yield increases per region, resulting from the use of the injector, ranged from about 250 to 1300 kg grain ha^–1. The value of the yield increase would allow most farmers to recover the costs of the injector within one season, even if labour was hired to carry out the injections. The average labour requirement of the injector was 40 hours ha^–1. In Indonesia, injection of prilled urea gave yields similar to those obtained with urea briquettes.