图片彩色参数数字滤波设计

颜色和形状信息是识别物体的重要信息．本文提出用数字滤波器将图象空间分割为H包含M和M/H空间的一种方法．该方法进一步将分析彩色图象为众所周知的测量分割部分几何特征的算法，包括通过节点的阶数确定分割部分的分布及动态特征，包括速度和移动方向的分布等．     

基于BP神经网络的心电图ST段的模式识别

心电图ST段对心脏疾病的诊断具有重要意义.在正确读取采集于郑州大学一附院的运动心电图数据基础上,利用小波变换更准确地确定其ST段的起始和终止位置,初步探讨了BP神经网络用于心电图ST段识别的方法,并用此方法识别出心电图ST段的三种类型-正常、水平压低和抬高.实验结果较好.     

基于颜色空间映射的自适应足球机器人视觉系统

为了解决足球机器人比赛中视觉信息检测问题,给出基于嵌入式多处理器体系结构的视觉系统框架,并研究了一种自适应阈值目标分割方法。该方法将视觉系统采集的图像从YCbCr颜色空间转换为一维颜色映射图像,并提出基于竞争学习的空间映射方法。同时使用小波变换方法来平滑颜色映射空间直方图和降低阈值搜索维数。然后使用基于映射图像直方图动态搜索阈值的方法来分割图像。最后,通过实验表明研究的视觉系统的有效性,能够实时准确地完成视觉处理任务。     

盾构管片衬砌吊装孔预埋件抗拔力试验初探

新版盾构法隧道施工及验收规范已于2017年7月实施,新规范中增加了对管片吊装孔预埋件“设计无要求时,抗拉拔力不应低于管片自重的7倍”的要求,对比之前常规5tf地铁管片设计采用的25tf,相当于提高了40%。文章依据管片预埋吊装孔抗拔力涉及的几种国家标准、行业规范,对几种抗拔试验进行了对比,参照ABAQUS有限元软件数值模拟法,论述了管片吊装孔预埋件抗拔力试验应注意的一些事项,为类似管片抗拔试验提供一些参考资料。     

Visual recognition efficiency of handheld infrared thermometer interface information under low ambient illuminance

One of the symptoms of plagues, epidemics or pandemics is often a fever, so during such unprecedented times, handheld infrared thermometers are vital devices for monitoring symptomatic individuals. It is therefore very important to enhance reading efficiency when these thermometers are used for lengthy periods of time in a low illuminance environment. The need for the efficient reading of infrared thermometers or a fast reaction time when reading the information is even more relevant now during the COVID-19 pandemic. In this study, a target search experiment of digital characters is carried out through a simulated interface and use scenarios of a handheld thermometer based on three variables: the inclination angle or slant of the seven segment display characters, screen brightness, and ambient illuminance. The experimental results show that the inclination angle or slant of the characters and ambient illuminance have a significant effect on the reaction speed. In general, the slowest reaction time is found when reading characters with a slant of 10° to the left and the reaction time is the fastest with a right slant of 20°. A continued reduction in ambient illuminance does not affect the visual recognition performance but instead further enhances reading efficiency. Increasing the screen brightness increases the reaction time more in relatively low ambient illuminance conditions as opposed to relatively high ambient illuminance, which implies that in higher ambient illuminance conditions, a brighter screen needs to be used to obtain the same reaction speed as that in lower ambient illuminance conditions.     

基于图像处理的片式元件缺陷检测算法

表面缺陷检测是电子元器件生产过程中的关键步骤,通过分析表面缺陷检测的现状问题,结合片式元件图像的自身特征,提出一种基于改进的自适应阈值canny算子的片式元件缺陷检测算法;该算法把片式元件灰度图像进行区域分割,得到不同值域范围内的灰度区域,利用带有敏感度的自适应双阈值canny算子进行边缘检测;算法实现结果表明,该算法能高效地检测并处理不同缺陷类型的片式元件,并且可以达到工业生产的检测速度。     

软段含羧基的水性聚氨酯贮存稳定性研究

合成了软段含羟基的水性聚氨酯（WPU），对影响其贮存稳定性的各种因素进行了研究，通过显微镜对PU进行了观察。结果表明：以甲苯二异氰酸酯（TDI）合成，在有性溶剂（如丁酮、丙酮）条件下用三乙胺中和，采用较小相地分子质量的聚酯有利于增强WPU的贮存稳定性，以TDI合成的PU-TDI体系的粒径较PU-IPDI体系的小，稳定性高；以丁酮、丙酮为溶剂的PU-IPDI体系相反转完全。     

水性聚氨酯结构与微相分离的研究

合成了一系列水性聚氯酯，并用红外光谱、差示扫描量热仪对乳液胶膜进行表征，考察了软段组成、DMPA含量及。(-NCO)：n(-OH)比值对产物微相分离的影响。实验结果表明：聚醚型产物的微相分离程度高于聚酯型产物。提高DMPA用量，软段Tg移向低温区，说明体系的做相分离程度加大。随着n(-NCO)：n(-OH)比值的增大，软段Tg也移向低温区，软硬段的微相分离程度增大.     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.     

软段含离子基团的阴离子型水性聚氨酯胶粘剂的研究(Ⅱ)——硬段结构的影响

以含有不同离子基团的聚酯多元醇为软段,采用丙酮法合成了一系列水性聚氨酯乳液。研究了不同硬段结构和硬段含量和扩链剂对其干膜物理机械性能和吸水率的影响。