Preparation of polyimide-epoxy composites

The formation of a three dimensional network of crosslinked epoxy leads all unmodified epoxies to have inherent brittleness and relatively low degradation temperatures. Polyimides, on the other hand, are widely used for applications that require high degrees of flexibility and thermal resistance. Here, we have focused on the preparation of epoxy systems cured with polyamic acids instead of traditional amino-group-containing hardening agents. The cure behavior and potential reaction mechanisms of EPON 828 resin and polyamic acid mixtures were evaluated by DSC and TGA. Thermal analysis showed a complex reaction sequence taking place in the mixture and also determined the extent of reaction of the polyamic acid with itself and the competitive reaction of the polyamic acid with the epoxy. The compositions of the mixtures were varied to see the dependence of the cure behavior on component concentrations. Solutions of the two components did not phase separate and also phase separation was not apparent either optically or microscopically in the cured samples. This phase behavior was attributed to a unique in situ reaction. A novel solvent system for the polyamic acid precursor was also used.     

Optimal Solutions for the Temporal Precedence Problem

Abstract. In this paper we refer to the Temporal Precedence Problem on Pure Pointer Machines . This problem asks for the design of a data structure, maintaining a set of stored elements and supporting the following two operations: insert and precedes . The operation insert (a) introduces a new element a in the structure, while the operation precedes (a,b) returns true iff element a was inserted before element b temporally. In [11] a solution was provided to the problem with worst-case time complexity O (log log n ) per operation and O(n log log n) space, where n is the number of elements inserted. It was also demonstrated that the precedes operation has a lower bound of Ω (log log n ) for the Pure Pointer Machine model of computation. In this paper we present two simple solutions with linear space and worst-case constant insertion time. In addition, we describe two algorithms that can handle the precedes (a,b) operation in O (log log d ) time, where d is the temporal distance between the elements a and b .     

Synchronization models for multimedia presentation with user participation

This paper addresses the key issue of providingflexible multimedia presentation with user participation and suggests synchronization models that can specify the user participation during the presentation. We study models like the Petrinet-based hypertext model and the object composition Petri nets (OCPN). We suggest adynamic timed Petri nets structure that can model pre-emptions and modifications to the temporal characteristics of the net. This structure can be adopted by the OCPN to facilitate modeling of multimedia synchronization characteristics with dynamic user participation. We show that the suggested enhancements for the dynamic timed Petri nets satisfy all the properties of the Petri net theory. We use the suggested enhancements to model typical scenarios in a multimedia presentation with user inputs.     

起重机吊钩拖动绕线电动机他励双高调速系统

本文提出励磁电流可自动控制的他励式双高调速系统设计方案。系统在提升特别是在下放重物时，具有较硬的机械性；在负载１０－１００％的变化范围内，可实现最大偏差Δｎｍａｘ／ｎｍｉｎ１００％≤１０％，调速范围Ｄ≥１０；在满载运行条件下，可节约电能８０％以上。     

具有再生反馈雷达的角跟踪性能闭环测试

本文论述了用雷达跟踪目标最大角速度和角加速表征具有再生反馈雷达角跟踪性能的合理性,并论述了用单片机测试雷达跟踪目标最大角速度和最大角加速的方法。     

整体式预热器U型管蒸汽发生器数学模型及动态模拟

本文针对整体式预热器Ｕ型管蒸汽发生器建立了热工数学模型并进行了动态模拟。该模型是一个２５阶、非线性、可移动边界模型。包括：一、二次侧的质量与能量平衡方程以及确定二次侧下降段流量的动量守恒方程。对所建立的模型利用Ｇｅａｒ方法作了蒸汽阀门开度阶跃１０％的瞬态模拟，所得结果和国外所公布的结果吻合得很好。由此可见。本文所建立的模型可以为这种蒸汽发生器的设计、运行、控制提供理论依据。     

非线性系统鲁棒吸引的动态补偿方法

考虑非线性不确定系统的鲁棒吸引问题,借助于动态输出反馈,构造了两类控制律。这两类控制律分别可使相应的闭环系统被一任意小的区域鲁棒吸引,或被一预先设置的区域有限吸引。     

不确定控制系统的输出反馈镇定

本文研究具有匹配和非匹配不确定性系统的输出反馈镇定。在对不确定性的增长性作适当限制的条件下，利用本文引入输出反馈严格正实系统的概念，构造了保证团环系统在开球Ｂ上或在Ｒ＾ｎ上指数式稳定的光滑或解析输出反馈控制律。     

峒室爆破CAD设计方法研究

本文对峒室爆破断面布药计算机辅助设计参数驱动方法进行了探讨围绕断面布药主要参数的变化，提出一种基于参数驱动的计算机辅助设计方法，利用ｗｉｎｄｏｗｓ操作系统下的动态数据交换特性，对断面布药进行布药参数优化，实现了交互调整布药，形成一套断面布的计算机软件，为工程爆破设计实现计算机提供了一种可行的方法。     

面向油气需求的俄罗斯钢管制造业

介绍了俄罗斯制管业的发展概况和国内制管企业格局及产能，同时重点阐述了大直径钢管的发展状况和市场预测，指出俄罗斯钢管业发展趋于稳定，俄罗斯钢管产能已能满足所有地区油气输送部门、机械制造业的需要。