含三维内裂纹透明类岩石材料破坏红外热像试验研究

由于目前针对含三维内裂纹的岩石破坏红外热像特征的研究较少,本文基于预埋浇注法制作含内裂纹类岩石试件,开展了单轴压缩块体试验和巴西圆盘劈拉试验,得到含内裂纹的岩石破坏过程,监测内裂纹扩展及试件破坏过程中的红外热像特征,得到以下结论:(1)含三维内裂纹的块体试件在单轴压缩下,在预制内裂纹面上发生剪切破坏;(2)块体试件在单轴压缩作用下红外热像特征明显,在破坏时,在预制内裂纹面处急剧升温;(3)含三维内裂纹巴西圆盘试件在预制内裂纹尖端发生翼型裂纹扩展,边缘带有针刺状Ⅲ型裂纹参与特征,最终翼型裂纹与上下表面贯穿;(4)巴西圆盘试验的红外热像特征与块体单轴压缩不同,在断裂面处未发生明显变化。研究结果为研究三维内裂纹的扩展规律及内裂纹扩展破裂的红外热像规律可提供一定的试验参考。     

红外图像处理在墙体空鼓检测上的应用研究

提出了一种基于红外图像的建筑物墙体空鼓检测方法,不但可以远距离、无损地对建筑物空鼓等缺陷进行定性检测,还能对建筑物热工缺陷进行定量分析;采用一种红外图像处理方法来消除墙体温度分布中梯度干扰的影响;通过自适应地调整参数对红外图像进行图像增强处理,有效地排除了环境干扰;通过基于空鼓缺陷边缘轮廓的连通域计算,可直接得到空鼓面积的大小数据;建筑物缺陷现场检测实验结果表明,提出的检测方法既能快速定位出建筑物空鼓等缺陷位置又能以78.3%的精度检测出空鼓面积大小,具有较高的工程应用性。     

视觉测量中多光学靶点亮度自适应控制

提出了一种面向大视场高精度视觉测量的多红外目标靶点（红外LED）亮度自适应控制方法。以微控制器PIC16F873A和LED驱动芯片MAX6964作为核心器件,设计了可满足大空间范围内靶点亮度控制需求的多目标靶点控制驱动器。为了使LED在近距测量时的调节精度和远近距离测量时的发光亮度都能满足要求,根据MAX6964输出特点设计了PWM信号输出电路,并采用推挽电路驱动LED。实验证明,目标靶点在CCD相机上成像光斑稳定一致。     

漫射红外技术的智能家居无线局域网设计

分析了红外技术在短距离无线通信中的优势,并将其应用在智能家居局域网中;结合安华高科技公司的HSDL-3020红外收发模块搭建了硬件电路,构成网络的主从节点;介绍了网络组建的过程,包括IrDA协议栈结构、数据编码格式、链路连接、网络管理机制等。本设计实现了对家居设备的统一管理,具有较高的应用价值。     

改进神经网络在芝麻油掺伪检测中的应用

研究芝麻油掺伪检测问题,提高检测精度。由于成分复杂,掺伪后化学成分变化,直观难以检测。传统物理或化学芝麻油掺伪检测方法操作复杂,设备昂贵,存在不同程度缺陷。结合近红外光谱技术和神经网络优点,提出一种RBF神经网络-近红外光谱的芝麻油掺伪检测方法(NIR-RBF)。首先采用近红外光谱提取芝麻油样本的光谱信息,然后采用主成分分析提取光谱信息主要有效成分,最后将主要有效成分输入到神经网络进行学习,得到芝麻油掺伪检测结果。采用建立的模型对掺入不同类型植物油的芝麻油进行检测,结果表明,相对于其它芝麻油掺伪检测方法,NIR-RBF提高了检测精度和速度,降低了检测误差,是一种快速、有效的芝麻油掺伪检测方法。     

Photovoltaic effect and carrier transport mechanisms in Hg1-Mnxtdiodes

Hg_1-xMn_xTe semiconducting semimagnetic alloy has been examined in the context of its possible applications in infrared detectors. For analysis of detector properties the intrinsic carrier concentration has been calculated as a function of temperature and crystal composition. The starting material was In-doped Hg_1-xMn_xTe grown by the modified Bridgman method. The as-grown crystals with manganese content of 12-19% were p-type with carrier concentration and mobility of 100 cm²/ Vs at 77 K. An-type layer was formed on the surface by the annealing process in saturated Hg-vapour at 270-320° for 2 hrs. Capacitance-voltage curves have C^-3 dependence on applied voltage indicating that the junction is linearly graded. From standard electrical measurements and spectral characteristics the main detector parameters were determined and compared to those of Hg_1-xCd_xTe devices. The influence of material properties on detector parameters was analyzed. In order to estimate the carrier transport mechanisms, differential resistivities and current-voltage curves were measured over a wide range of temperaturesi.e. 25 to 300 K. From the temperature dependence of the R₀A product, it was established that at high temperatures (150-300 K) the carrier transport is dominated by a recombination-generation mechanism. In low temperature region the excess current at forward bias is probably attributed to carrier tunneling via energy states distributed randomly within the forbidden gap. At reverse bias the leakage surface or volume currents dominate in the carrier transport.     

Photothermal radiometric detection and imaging of surface cracks

This paper discusses surface crack detection by photothermal radiometric imaging (PRI). In PRI, also called dynamic infrared scanning, a surface is scanned with a spot of heat. Imperfections are detected by radiometrically sensing changes in the surface temperature of a small area in the vicinity of this spot. In the work described, cracks narrower than 25 µm (0.001 in.) in a lightly rusted steel surface have been detected. Indiscrete scanning an amplitude modulated heating beam is moved in steps, remaining at each location long enough to measure amplitude and phase of the AC temperature. Incontinuous scanning a constant intensity heating beam is moved continuously while the temperature deviations are measured. This paper presents methods of calculating amplitude and phase of surface temperature for discrete scanning and instantaneous temperature for continuous scanning across a surface crack. For a steel surface scanned by a watt-level laser beam, predicted surface temperature deviations when crossing the crack are several degrees Celsius, with expected radiometrically detected power several orders of magnitude above the detector noise. In experiments performed, both techniques easily detected narrow cracks in a smooth, clean surface. Discolorations and pits, on the other hand, generate a disturbing type of surface noise. This noise was minimized by differential detection. Based on results obtained, continuously scanned PRI with a fan-type heating beam and array detection could become a viable way of mapping surface cracks at practical scanning speeds.     

基于红外检测的变电站设备热状态诊断

提出了一种基于红外检测的变电站设备热状态诊断方案。首先基于变电站设备的红外图像,采用局部方差映射函数和遗传算法阈值提取了变电站设备的热状态数据,以用于对异常区域进行分割。然后构建了红外图像灰度数与变电站设备温度两者之间的关系。最后采用改进的相对温差法达到了对设备热状态进行分类和诊断的目标,并捕获定位了变电站设备的热状态异常区域。实验结果表明,该方法提高了异常热区提取的精度和效率,提升了变电站设备热状态诊断的容错能力,进一步保证了变电站和整个电力系统的运行稳定性。     

基于AIE特性的萘酰亚胺衍生物的合成及光谱研究

以分子内电荷转移为原理,选用萘酰亚胺为荧光团,与三苯胺通过偶联反应,制备了一种萘酰亚胺衍生物有机光功能小分子材料,其合成路线简单,实验操作条件易控,成品产率较高。对其光学性能进行研究,在不同溶剂中的光学性能主要表现出两个强吸收带,荧光发射达到到近红外区域,其表现出了非常明显的聚集诱导发光（AIE）特性,固体表现出很强的橘橙色荧光现象。     

氮气氛下直拉硅中氮含量的红外光谱测定

提出了利用直拉硅中与氮有关的特征红外吸收峰９６３、９９６、１０８１－１及１０２７ｃｍ－１确定直拉硅中氮含量的计算公式，并进行了多种样品实测。该法克服了只用９６３ｃｍ－１峰测定直拉硅中氮使结果偏低的弊病，方法相对偏差为５％～２０％