一种实现目标定位与跟踪的新方法

本文介绍了一种采用圆周阵对目标声源进行被动定位和跟踪的方法，与线阵不同，圆四可对目标进行全方位跟踪，且测距精度不受目标方位变化的影响，文中给出了圆周阵的测距，测向公式，并从理论上分析了测距性能，计算机仿真结果验证了理论分析的正确性。     

地面驱动单螺杆泵杆柱的组合设计

根据地面驱动单螺杆泵的工作特点，分析了传递动力的抽油杯柱受力状况，认为抽油杆柱受复合载荷的作用，在承受扭矩的同时承受较大的轴向力，给出了各种载荷的计算方法。由第四强度理论，提出了把抽油杯柱设计成两级杆柱的等强度组合设计方法，即先按要求及标准确定两级杆柱的直径和长度，然后扶强度条件进行校核。根据油田的实际情况，编制了抽油杆柱电算程序，并给出了设计训一算实例。     

Software for dynamic reconfigurable order picking systems

This paper describes an approach, conceptual framework, and software architecture for dynamic reconfiguration of the order picking system. The research and development project was sponsored by the Material Handling Research Center (MHRC), a National Science Foundation sponsored Cooperative Industry/University Research Center. The storage configuration is assumed to be an in-the-aisle order picking system in which stockkeeping units (SKUs) can occupy variable capacity storage locations and stock-splitting is allowed among zones (clusters). The product mix may include multiple product families with different life cycles, correlated demand within families and commonality of demand across families.     

Apollonius tenth problem via radius adjustment and Möbius transformations

The Apollonius Tenth Problem, as defined by Apollonius of Perga circa 200 B.C., has been useful for various applications in addition to its theoretical interest. Even though particular cases have been handled previously, a general framework for the problem has never been reported. Presented in this paper is a theory to handle the Apollonius Tenth Problem by characterizing the spatial relationship among given circles and the desired Apollonius circles. Hence, the given three circles in this paper do not make any assumption regarding on the sizes of circles and the intersection/inclusion relationship among them. The observations made provide an easy-to-code algorithm to compute any desired Apollonius circle which is computationally efficient and robust.     

高压注水管柱受力分析

进行高压注水管柱受力分析的目的就是根据注水条件研究注水管柱在不同过程中的各类效应，以及这些效应对管柱产生的受力和变形规律，从而明确注水管柱的工作状态，保障注水管柱有效合理地工作。较详细地分析了高压注水管柱在锚定、坐封以及注水3个过程中的受力状态和变形情况，并分析了高压注水管柱在不同过程中受到的各种效应的影响，推导出注水管柱在不同过程中的应力及变形的计算公式，并给出了算例。     

内管注水泥固井工具的研究与分析

内管注水泥技术是针对大尺寸套管和表层套管固井的特点及特殊要求而采用的一种固井技术，具有省时、替量少等特点，在现场得到大量推广应用。内管注水泥器是内管固井技术的关键工具，其性能好坏直接影响到固井质量。对各种内管注水泥固井工具的结构及特点分别进行了分析研究，并就其发展方向提出建议。     

Hazardous waste management problem: The case for incineration

We define the hazardous waste management problem as the combined decisions of selecting the disposal method, siting the disposal plants and deciding on the waste flow structure. The hazardous waste management problem has additional requirements depending on the selected disposal method. In this paper we focus on incineration, for which the main additional requirement is to satisfy the air pollution standards imposed by the governmental restrictions. We propose a cost-based mathematical model in which the satisfaction of air pollution standards is also incorporated. We used the Gaussian Plume equation in measuring the air pollution concentrations at population centers. A large-scale implementation of the proposed model within Turkey is provided.     

修井作业中的自动起下管柱系统探讨

目前在油田修井作业中起下管柱的人工作业量大、工作效率低、危险性大、工作条件差。提出了一种自动起下管柱作业系统,主要包括通井机、井架、液压钳、筒式吊卡、卡瓦支座、立式排管架和控制系统等,支座卡瓦为弹性体微条嵌入式结构,筒式吊卡能自动卡入和松开管柱接箍,排管架可实现管柱的立式排放,控制系统协调各部分的工作。该系统构思新颖,结构简单,技术可行,并能够与现有修井设备配合使用,实现油田修井作业的自动化。     

新型水力泵排液工艺

酸化或压裂是改造油气层措施中常规的也是最有效的方法之一。问题是酸化或压裂结束后,采取何种工艺及时返排出残酸,减少残液二次沉淀对油层的污染。同时常规TCP(油管传输负压射孔)+DST(地层测试器)二联作测试工艺在遇到低压、低渗等非自喷油层时,要想取准油层产能、压力,收集到有代表性产液样品资料,困难很大。针对以上问题,大港油田钻采院研制了新型水力喷射泵,该泵可与酸化、压裂及射孔+测试等工艺配套使用,在实现一趟施工管柱同时完成几项工作的同时,利用喷射泵深抽、连续强排的技术特点,取得了较好效果。     

浅谈黄土高原重点水土流失区的林业生态工程建设

黄土高原重点水土流失区林业生态工程建设的现状可以用“三低”（造林成活率低、保存率低、林木生长率低）来概括，人工林具有矮化，纤细，低产，烯疏4个特征，自然条件，适地适树、苗木质量、造林技术、抚育管护等5个方面的问题是造成“三低”的主要原因，适地适树适法是现阶段防治中造林“三低”的主要技术途径，其核心是“林水平衡”合理布局，适地适树，重视经济树种、抗旱造林以及加强病、虫、鼠、免、牛、羊、危害防治，是搞好区内林业生态建设的主要技术措施。