基于PC机群的大地电磁Occam反演并行计算研究

Occam反演以其稳定收敛和不依赖于初始模型的特性被广泛应用于大地电磁数据的处理，但偏导数矩阵的计算和拉格朗日乘子的求取导致大量的模型正演，使得反演速度较低。为此，研究了用基于PC机群的并行计算来解决这一问题的方法。首先对Occam反演方法进行了阐述；然后，分析了反演方法中各计算耗费的时间，提出对约占计算量90％的偏导数和拉格朗日乘子进行并行计算的思想，即偏导数计算采用频点计算一级的大粒度并行，拉格朗日乘子扫描和一维搜索分别采用弘值计算一级的大粒度并行和频点计算一级的小粒度并行；给出了并行计算的实现方法，即在PC机群上，利用主一从编程模式实现Occam反演的整体并行计算。在计算中，采用任务组合方式，减少了通信量，较好地实现了负载均衡。在4节点PC机群上，对应于拉格朗日乘子的扫描和一维搜索方式，整体加速比分别达到3．36和2．83。     

空气钻井技术在普光气田的应用

普光气田是四川盆地已发现的最大天然气田。普光气田已钻井实践表明,常规钻井液钻井技术机械钻速低,钻井周期长,钻井复杂及事故多,无法满足普光气田开发要求。为了提高钻井速度,缩短钻井周期,加快普光气田的开发进程,在PD-1井、P2-2井、PA-2井、P4-2井、P6-3井等5口井进行了空气钻井试验。文中分析了普光气田进行空气钻井的可行性,介绍了空气钻井技术在普光气田的实践情况,并对空气钻井的效果进行了评价,分析了空气钻井技术在普光气田进一步应用需要重视和解决的问题,并提出了今后的研究方向。     

Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

浅谈土石坝安全鉴定工程地质勘察的几点体会

针对在土石坝的安全鉴定勘察过程中,往往会遇到诸如周期短、经费有限,试验、取样困难,试验参数的选取复杂等问题,指出应经济合理地布置勘探工作、事前制定详细完善的计划、综合分析各种参数等措施才能使安全鉴定勘察工作圆满完成.     

双排桩门架—锚杆新型组合支护体系的应用研究

本文分析了双排桩门架支护结构的受力机理。针对工程实际进行变形分析,提出增设锚杆形成锚杆———双排桩门架式组合支护体系的方法,并与监测数据对比、验证。     

基于实际井眼轨迹的抽油杆柱API设计方法

目前的抽油杆柱设计方法大都基于设计井眼轨迹或经验公式，因此设计的抽油杆柱与井眼的匹配性并没有达到最优，结果可能影响了抽油杆柱的受力特性和寿命。概述了目前现有的抽油杆柱设计方法，提出了基于实际井眼轨迹的抽油杆柱API设计方法，即考虑到在三维空间中井下粘滞阻力及动载的影响，利用微单元分析方法计算出轴向载荷与轴向应力，然后在此基础上进行杆柱组合设计，并给出了设计流程。以江苏油田永21-3井为例，对几种设计方法的设计结果进行了对比分析，结果表明，江苏油田目前采用的抽油杆柱设计方法包含了人为经验因素，并不是最优的杆柱设计结果，有待进一步改进。     

教育要有针对性管理要有强制性

分析高职学生思想状态的多层次性,提出以正面的思想教育和启发引导为主,同时加强规章制度的制约性,以提高教育管理工作的效果.     

HB-3、HB-4型钴钼触媒升温硫化总结

总结了HB - 3,HB - 4型钴钼触媒升温硫化过程及注意事项 ,简单介绍了使用情况 ,并针对出现的问题采取了一定措施     

Biotransformation of l‐menthol by twelve isolates of soil‐borne plant pathogenic fungi (Rhizoctonia solani) and classification of fungi

The microbial transformation of l‐menthol ( 1 ) was investigated by using 12 isolates of soil‐borne plant pathogenic fungi, Rhizoctonia solani (AG‐1‐IA Rs24, Joichi‐2, RRG97‐1; AG‐1‐IB TR22, R147, 110.4; AG‐1‐IC F‐1, F‐4, P‐1; AG‐1‐ID RCP‐1, RCP‐3, and RCP‐7) as a biocatalyst. Rhizoctonia solani F‐1, F‐4 and P‐1 showed 89.7–99.9% yields of converted product from 1 , RCP‐1, RCP‐3, and RCP‐7 26.0–26.9% and the other isolates 0.1–12.0%. In the cases of F‐1, F‐4 and P‐1, substrate 1 was converted to (?)‐(1S,3R,4S,6S)‐6‐hydroxymenthol ( 2 ), (?)‐(1S,3R,4S)‐1‐hydroxymenthol ( 3 ) and (+)‐(1S,3R,4R,6S)‐6,8‐dihydroxymenthol ( 4 ), which was a new compound. Substrate 1 was converted to 2 and/or 3 by RRG97‐1, 110.4, RCP‐1, RCP‐3 and RCP‐7. The structures of the metabolic products were elucidated on the basis of their spectral data. In addition, metabolic pathways of the biotransformation of 1 by Rhizoctonia solani are discussed. Finally, from the main component analysis and the differences in the yields of converted product from 1 , the 12 isolates of Rhizoctonia solani were divided into three groups based on an analysis of the metabolites. Copyright © 2003 Society of Chemical Industry     

一次量子通信QKD和QA协议

提出一种通过一次量子通信同时实现密钥分发(QKD)和量子认证(QA)的方案.此方案基于GHZ态的相关性,事先在|△＞态制备n对处于纠缠态的量子位.最后证明了此协议是有效和绝对安全的.