径向水平井弯曲转向机构影响因素仿真研究

针对径向水平井钻进中钻杆弯曲转向前进运动困难的问题,通过建立弯曲转向机构仿真有限元模型,对其主要影响因素:滑道轨迹曲率、间隙、工作压力、滚轮形状与位置和钻杆壁厚等用ANSYS软件进行仿真研究。研究表明:影响截面变形的主要因素是滑道曲率的改变和滑道摩擦因数,钻井失败时钻杆所受阻力的增大不是因为升高工作压力导致截面变形过大与滑道干涉所致,钻杆经校直段,钻头中轴线与校直中心线存在一定的角度,即钻杆的前进轨迹就会偏离理论值,或与地层干涉,或可能再次发生弯曲变形;另一主要原因是转向器滑道工作恶化。增加钻杆壁厚,降低工作压力和滑道摩擦因数,设计合理弯曲转向机构是解决问题的关键。     

有限元技术在数值试井中的应用

分析了试井技术的发展趋势，对有限元分析技术及其发展作了较为全面的介绍，重点阐述了利用有限元技术进行三维建模的方法和步骤，尤其是对复杂的非对称边界和非均质油藏的建模方法和技巧进行了深入探讨。利用数值试井技术，石油工程师可以方便准确地对复杂油藏和边界进行建模，试井的模拟过程和油藏任意位置的压力瞬间变化都可以通过图形和颜色的变化显示出来，解释的精度和速度都得到了大大地提高。     

聚合物熔体的非等温平板收缩流动的数值模拟

用有限元法模拟了Carreau流体在4：1平板收缩口模中的非等温挤出流动，采用3节点的三角形单元对速度、压力和温度进行等阶插值，运用特殊的罚函数处理流体的不可压缩条件，解决了压力场的数值振荡问题，并用改进的Newton迭代法对非线性方程进行求解，成功地计算了Carreau流体在平板收缩流动中的速度、压力、粘度以及应力的分布，同时得到温度场的分布，计算的应力分布与实验的结果及Renardy的分析结构相符。     

X射线光刻掩模背面刻蚀过程中的形变仿真

开发了理论模型以验证有限元方法用于X射线光刻掩模刻蚀过程数值仿真的正确性。利用相同的有限元技术，对X射线光刻掩模的背面开窗、Si片刻蚀过程进行数值仿真。结果表明，图形区域的最大平面内形变(IPD)出现在上、下边缘处，最大非平面形变(OPD)出现在左、右边缘处。此外对Si片单载荷步刻蚀和多载荷步刻蚀的仿真进行比较，结果表明图形区域最终的形变量与Si片刻蚀的过程无关。     

Field Static Load Test on Kao-Ping-Hsi Cable-Stayed Bridge

Field load testing is an effective method for understanding the behavior and fundamental characteristics of a cable-stayed bridge. This paper presents the results of field static load tests on the Kao-Ping-Hsi cable-stayed bridge, the longest cable-stayed bridge in Taiwan, before it was open to traffic. A total of 40 loading cases, including the unit and distributed bending and torsion loading effects, were conducted to investigate the bridge behavior. The atmospheric temperature effect on the variations of the main girder deflections was also monitored. The results of static load testing include the main girder deflections, the flexural strains of the prestressed concrete girder, and the variations of the cable forces. A three-dimensional finite-element model was developed. The results show that the bridge under the planned load test conditions has linear superposition characteristics and the analytical model shows a very good agreement with the bridge responses. Further discussion of deflection and cable forces of the design specifications for a cable-stayed bridge is also presented.     

Computational analysis of thin coating layer failure using a cohesive model and gradient plasticity

Thermal barrier coatings (TBC) are widely used to prevent transient high temperature attack and allow components high durability. Due to strong inhomogeneous material properties the TBC failure often initiates near the interface between the brittle oxide layer and the ductile substrate. A reliable prediction of the TBC failure requires detailed information about the crack tip field and the consequent fracture criteria. In the present paper both cohesive model and gradient plasticity are used to simulate the failure process and to study interdependence of the interface stress distribution with the specific fracture energies. Computations confirm that combination of the two models is able to simulate different failure mechanisms in the TBC system. The computational model has the potential to give a realistic prediction of the crack propagation process.     

基于可靠性评价的含缺陷核压力管道疲劳寿命预测方法

含缺陷压力管道经缺陷评定合乎使用后,其疲劳寿命的估计具有重要的工程意义。将整个含缺陷压力管道作为一个整体,分析了含缺陷压力管道的疲劳裂纹扩展特点,提出了相应的含缺陷压力管道疲劳寿命的计算过程,并在基于可靠性评价的基础上,给出了核压力管道的可接受失效概率,最终得到了含缺陷核压力管道疲劳寿命预测方法。     

Implementing Qubits with Superconducting Integrated Circuits

Superconducting qubits are solid state electrical circuits fabricated using techniques borrowed from conventional integrated circuits. They are based on the Josephson tunnel junction, the only non-dissipative, strongly non-linear circuit element available at low temperature. In contrast to microscopic entities such as spins or atoms, they tend to be well coupled to other circuits, which make them appealling from the point of view of readout and gate implementation. Very recently, new designs of superconducting qubits based on multi-junction circuits have solved the problem of isolation from unwanted extrinsic electromagnetic perturbations. We discuss in this review how qubit decoherence is affected by the intrinsic noise of the junction and what can be done to improve it. PACS: 03.67.-a, 03.65.Yz, 85.25.-j, 85.35.Gv     

XC气田烃类渗漏的生态环境问题探讨

利用中子活化法对四川盆地XC气田的天然气进行分析，发现其中含有20多种金属元素。通过剖面和观察点的观察分析，发现XC气田烃类渗漏，尤其是天然气泄漏对生态环境造成了较大的负面影响：改变浅表生态环境，造成植物生长发育异常，农作牧减产；降低土壤pH值，增加金属元素的水溶态，从而增加植物对其的吸收消化；同时，植物还能从天然气中直接吸收消化一些金属元素。因此，天然气泄漏使农作物吸收消化过多的有毒有害金属，损害农产品品质，应当引起严重关注。     

小型低温真空光学实验装置设计

为适应未来遥感光学系统研究的需要,研制了一套低温真空实验装置.该实验装置包括低温真空腔体、真空抽气系统、ZYGO干涉仪和防震平台以及监控测温系统.其中的低温真空腔体是针对小型光学元件实验设计的,主要用于测量光学元件的温度场和低温变形,并且把电机产生的局部热量尽可能导出系统.文中还对真空低温腔的关键部件光学窗口和梯形支撑的设计进行了详细分析.