Characterization of Austempered Ductile Iron Through Barkhausen Noise Measurements

The outstanding mechanical properties of austempered ductile irons (ADI) are linked to the microstructure of the matrix obtained by subjecting a ductile iron with an appropriate composition to a heat treatment called austempering. Then the microstructure of the matrix consists of bainitic ferrite with different volume fractions of retained austenite. The aim of this work is to use the magnetic Barkhausen noise (MBN) as a nondestructive method for characterizing the microstructure of ADI. First, it is shown that the amplitude and position of the peak-shaped MBN response is quite sensitive to the microstructure of the matrix of ductile irons. Thus each type of constituent (equiaxial ferrite, pearlite, martensite or bainite) exhibits a typical response and, in turn, it can be identified from the MBN response. Furthermore, a good correlation is found between MBN signal parameters and ADI heat treatment parameters, indicating that MBN is also quite sensitive to fine evolutions of the microstructure of ADI. MBN peak position is especially sensitive to the type of bainite, whereas peak amplitude is linked to the progress of the bainite reaction. Hence MBN measurements appear to be a powerful tool to assess some important microstructural features of ADI castings.     

一种基于混沌同步的噪音衰减算法

论文提出了一种混沌通信系统的噪音衰减算法,该算法利用混沌同步现象在接收端获得正确的噪音估计值,从而从接收信号中滤除噪音恢复出正确的信号。通过数值仿真试验表明该方法是可行的。     

Impulsive Noise Suppression from Highly Distorted Images with Triangular Interpolants

In this paper a new filter, Triangular Interpolant Based Impulsive Noise Suppression Filter (SF), is proposed to restore images corrupted by fixed valued impulsive noise (IN). The proposed filter comprises two main stages: detection of noise and restoration of corrupted pixels. The SF achieves the restoration of the detected noisy pixels by using one of the Triangular Interpolant techniques and leaves the other pixels unaltered. Simulation results reveal that the proposed filter shows better performance than the highly approved IN suppression filters across a wide noise density ranging from 10% to 90%. The proposed filter also perfectly achieves the robustness anddetail preservation with reduced computational complexity.     

高分辨率地震资料处理中的优化速度分析方法

速度分析是地震资料处理过程中的重要一环。速度分析的质量直接影响动静校正,继而影响叠加成像以及偏移归位。针对如何优化速度分析,提出了基于道集资料噪音衰减、道集内相位时差校正、道集优化处理以及速度拾取应用约束等过程的优化速度分析方法。该方法在实际资料处理中取得了很好的效果。     

Cable Modem的原理与反向噪声的控制

介绍Cable Modem的基本概念、传输方式、标准规范，并对影响Cable Modem工作稳定性的反向噪声问题进行技术分析，并提出预防控制措施。     

多级非线性加权平均中值滤波改进算法

介绍了中值滤波的概念和几种改进的中值滤波算法，在几种改进算法的基础上提出了新的中值滤波改进算法。依据以上几种算法进行了仿真试验和图像视觉上的比较，并进行了数字图像的峰值信噪比（PSNR），归一化均方误差（NMSE）和归一化平均绝对误差（NMAE）的几种定量指标的比较。实验结果和几种定量指标比较结果表明，该算法能有效地滤除图像中的椒盐噪声，还能使图像保持很好的清晰度，明显优于几种改进的中值滤波算法。     

V波段小型化低相噪频率综合器

本文研究了一种V波段超小型低相噪频率综合器,研制了L段捷变频频综、Ku波段取样锁相源、上变频组件、倍频器等四个小型化组件.为了得到较低的相位噪声和捷变频速度,本捷变频频综采用上变频-倍频方案,其中DRO PLS保证低相位噪声性能,L波段捷变频频综保证捷变频功能.该频综尺寸为100×80×30mm³,相位噪声低于-86dBc/Hz(1kHz),捷变频时间小于40μs,杂波抑制优于-60dBc.     

Signal Integrity: Fault Modeling and Testing in High-Speed SoCs

As we approach 100 nm technology the interconnect issues are becoming one of the main concerns in the testing of gigahertz system-on-chips. Voltage distortion (noise) and delay violations (skew) contribute to the signal integrity loss and ultimately functional error, performance degradation and reliability problems. In this paper, we first define a model for integrity faults on the high-speed interconnects. Then, we present a BIST-based test methodology that includes two special cells to detect and measure noise and skew occurring on the interconnects of the gigahertz system-on-chips. Using an inexpensive test architecture the integrity information accumulated by these special cells can be scanned out for final test and reliability analysis.     

经济实用的DSP电源解决方案

笔者介绍了两种低纹波的DSP电源解决方案:一为采用MAX1793和大电流EMI静噪滤波器NFM41P;二为改进的去耦p型滤波电路和大电流EMI静噪滤波器NFM41P。并对方案的特点及其实现进行了详细的解析。试验结果表明:所述方案的纹波小,仅100 mV左右;成本低,仅几十元;适用范围广,通过改变MAX1793芯片的输出电压,可将本方案移植到TI的C5000,C6000系列,且还可用于其他的脱机工作系统。