Enhanced interfacial adhesion of aramid fiber reinforced rubber composites through bio-inspired surface modification and aramid nanofiber coating

In order to improve the interfacial adhesion between aramid fiber (AF) and rubber matrix, a simple and facile method of aramid nanofiber (ANF) coating is demonstrated in this article. Tannic acid (TA) and polyethyleneimine (PEI) are polymerized in an alkaline solution to form a thin TA/PEI (TP) layer that is deposited on the surface of AF to introduce functional groups such as hydroxyl and amino groups. Then, the ANF coating is utilized to construct nanostructures on the surface of AF to improve the interfacial adhesion between the fiber and the rubber. Through hydrogen bonding and/or π-π stacking between the TP layer and the ANF, the ANF coating is firmly attached to the surface of AF. Compared with the untreated fiber, the interfacial adhesion of AF coated with ANF after 1, 3, 5, 7, 9 deposition cycles is increased by 27.8%, 29.1%, 31.5%, 43.1%, and 30.3%, and the mechanical properties of the fibers remain almost unchanged. This method shows its advantages of simple, facile, and time-effective, which is of great significance for industrial applications.     

Polystyrene and poly(methyl methacrylate) interfaces reinforced with diblock carbon nanotubes

An asymmetric double cantilever beam test was used to determine the ability of carbon nanotubes with varying chemistry along their lengths, that is, diblock nanotubes, to compatibilize the polystyrene/poly(methyl methacrylate) (PS/PMMA) interface. PS molecules were grafted primarily to one of the blocks to cause that block to migrate to the PS phase since otherwise both blocks would prefer to reside in PMMA. Fracture toughnesses increased monotonically with increasing diblock carbon nanotube concentration and maximum values were like those for block copolymer-reinforced interfaces while single-chemistry nanotubes showed no reinforcing effect. However, the abrupt increase in fracture toughness with added compatibilizer indicative of a transition to crazing was not found consistent with nanotubes suppressing crazing in homopolymers. Scanning electron microscopy images of the fractured surfaces show agglomerates of carbon nanotubes present which are likely limiting the efficacy of carbon nanotubes at toughening the interface.     

Effects of different porous fillers on interfacial properties of poly (vinyl alcohol) hybrid films

Poly(vinyl alcohol) (PVA)-based hybrids have demonstrated broad liquid separation applications but separation performances are constrained by the compatibility between fillers and polymer, and thus it is essential to study the interfacial properties of these hybrids. In this work, PVA hybrids with four different porous fillers have been fabricated and characterized with Fourier transform infrared, X-ray diffraction, Scanning electron microscope, swelling and contact angle tests. Swelling results show that PVA has a degree of swelling (DS) of 79% in water but the swelling is compressed after adding fillers and the DS for PVA hybrids has decreased by 19%, 17%, 15%, and 9% for 30 wt% loading of ZIF-8, UiO-66, Hβ and ZSM-5, respectively. For methanol and its 10 wt% aqueous solution, similar swelling results are obtained due to mutual interactions among the filler, polymer and test liquids. Based on water and glycerol contact angle results, the surface energy of PVA is estimated to be 40.56 Nm⁻¹ and it drops to 27.39 Nm⁻¹ after adding less hydrophilic ZIF-8 or rise to 48.56 Nm⁻¹ after introducing more hydrophilic ZSM-5. The high-film hydrophilicity and then large surface energy have rendered methanol/water sorption selectivity of PVA hybrids decrease to some extent or vice versa.     

Simple approach to fabricate MXene/cellulose paper for electromagnetic interference shielding applications

A simple approach was developed to fabricate high-performance MXene/cellulose (MC)-based electromagnetic interference (EMI) shielding papers. The oriented MXene sheets located on one side of cellulose filter paper construct a continuous conductive layer, endowing the MC paper with high electrical conductivity (240.1 S/m) and excellent EMI shielding effectiveness (29.3 dB for 0.192-mm thickness) at an MXene content of 0.72 vol%. Moreover, the EMI shielding effectiveness of four stacked MC papers reached 40.5 dB. This result means that 99.9911% of the microwave radiation is attenuated, and 0.0089% is transmitted, through the four-piece MXene/cellulose filter papers. Therefore, MC paper has promising properties for excellent EMI shielding materials in current electronic devices.     

基于触摸屏的分布式伺服控制系统研究

传统的生产和检修设备大多采用继电器控制，操作复杂、故障点多、可靠性及可信度低、设计周期长、投资回收慢。与此同时随着自动化领域对人机界面要求的提高，触摸屏在这领域得到越来越广泛的应用。论文以现场总线控制系统理论和触摸屏幕应用理论为基础，介绍了一种基于RS232通讯协议的HITECH触摸屏与分布式控制系统的通讯方法，采用现场总线控制系统的设计思想，设计并实现了一个基于PWS6600、CAN总线和以太网的多电机的伺服控制系统。     

Visual Assessment of Alleged Plagiarism Cases

We developed a visual analysis tool to support the verification, assessment, and presentation of alleged cases of plagiarism. The analysis of a suspicious document typically results in a compilation of categorized “finding spots”. The categorization reveals the way in which the suspicious text fragment was created from the source, e.g. by obfuscation, translation, or by shake and paste. We provide a three‐level approach for exploring the finding spots in context. The overview shows the relationship of the entire suspicious document to the set of source documents. A glyph‐based view reveals the structural and textual differences and similarities of a set of finding spots and their corresponding source text fragments. For further analysis and editing of the finding spot's assessment, the actual text fragments can be embedded side‐by‐side in the diffline view. The different views are tied together by versatile navigation and selection operations. Our expert reviewers confirm that our tool provides a significant improvement over existing static visualizations for assessing plagiarism cases.     

一种基于低维足底压力特征的静态步态聚类算法

为了探究足底压力特征在身份识别中的应用,提出了一种静态步态聚类算法.该算法首先从压力测试板提取的静态数据中提取当前常用的足底压力特征,包含全局及局部特征,形成特征向量来表征样本对象;接着利用非负矩阵分解方法(non-negative matrix factorization,NMF)获取样本在变换特征空间中的映射及低维表示;最后结合模糊C-均值算法(fuzzy C-means algorithm,FCM)对降维后的样本对象进行聚类识别.实验结果显示该算法的聚类正确率达到90％左右;同时与其他算法对比,该算法在精度上具有较大的优势.经过实验验证与对比分析,该算法将样本数据压缩到极低维特征空间时,仍有效保留了样本类别信息,进而得出结论,该算法提取出的足底压力特征是有效的、可行的.     

Visual Analytics for Exploring Local Impact of Air Traffic

The environmental and noise impact of airports often causes extensive political discussion which in some cases even lead to transnational tensions. Analyzing local approach and departure patterns around an airport is difficult since it depends on a variety of complex variables like weather, local and general regulations and many more. Yet, understanding these movements and the expected amount of flights during arrival and departure is of great interest to both casual and expert users, as planes have a higher impact on the areas beneath during these phases. We present a Visual Analytics framework that enables users to develop an understanding of local flight behavior through visual exploration of historical data and interactive manipulation of prediction models with direct feedback, as well as a classification quality visualization using a random noise metaphor. We showcase our approach using real world data from the Zurich International Airport region, where aircraft noise has led to an ongoing conflict between Germany and Switzerland. The use cases, findings and expert feedback demonstrate how our approach helps in understanding the situation and to substantiate the otherwise often subjective discourse on the topic.     

Towards a smooth design process for static communicative node‐link diagrams

Node‐link infographics are visually very rich and can communicate messages effectively, but can be very difficult to create, often involving a painstaking and artisanal process. In this paper we present an investigation of node‐link visualizations for communication and how to better support their creation. We begin by breaking down these images into their basic elements and analyzing how they are created. We then present a set of techniques aimed at improving the creation workflow by bringing more flexibility and power to users, letting them manipulate all aspects of a node‐link diagram (layout, visual attributes, etc.) while taking into account the context in which it will appear. These techniques were implemented in a proof‐of‐concept prototype called GraphCoiffure, which was designed as an intermediary step between graph drawing/editing software and image authoring applications. We describe how GraphCoiffure improves the workflow and illustrate its benefits through practical examples.     

网络个人信息安全与保护

网络个人信息呈现出虚拟性、复杂性、权利性质双重性等特点,在网络信息保护过程中,个人信息及个人信息侵权的判断显得尤为重要。我们应当实行网络实名制,明确过错原则为一般规则原则;制定网络个人信息协商性声明,强调网络个人信息传播的自愿性。