利用独立分量分析法去除地震噪声

 独立分量分析（ICA）作为盲源分离（BSS）的一种新方法,是分解观测数据中独立信息的有力工具。以往的ICA算法一般假设噪声可以忽略不计，而实际的观测数据中又常常包含一些加性噪声。对于加性噪声的影响不能忽略的情况下，改进的ICA算法首先利用非零时间滞后协方差，应用两步特征值分解法(EVD)可成功地去除部分加性噪声的影响；再利用ICA算法就能更好地分离出原信号。本文通过对地震理论模型和实际资料的试验，说明改进的ICA算法能够有效地克服加性噪声对常规ICA算法的影响，能够分离出地震资料中的有效信号，从而实现利用独立分量分析压制地震资料噪声的目的。     

极大代数意义下幂矩阵的周期性特征

在分析一类离散事件动态系统的运行周期性及稳定性时,必须求解极大代数意义下矩阵的特征值。这一直被认为是十分困难的工作。直至目前为止,尚无一种能确定任一方阵全部特征值及特征向量的简易方法。本文对极大代数意义下任一方阵的幂矩阵的周期性特征进行了深入分析。本文的结果为寻求计算特征值及特征向量的新算法提供了十分有效的途径。     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

定轴转动与基础激励下梁的非线性动力学

采用Kane方程，建立了含耦合的几何及惯性非线性项的定轴转动与轴向基础激励联合作用下柔性梁的非线性动力学控制方程组，该方程组不仅包含二次及三次非线性项，而且体现了参数激励与外激励的联合作用。运用多尺度法，研究了匀转速，顺臂安装下悬臂梁的一阶模态主参激共振与外激励1/2次亚谐共振同时作用时梁的一阶近似稳态响应。结果表明，梁的一阶模态幅频特性将受到转速，旋转半径和激励幅值等参数变化的显著影响。     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

基于主元分析的多变量统计过程的故障辨识技术

为了更好的进行故障检测与诊断，介绍了主元分析理论，给出了基于主元分析的过程故障辨识机理及策略。仿真实例表明，利用此方法建立的故障诊断模型，能够在不依赖过程机理的前提下高效抽取原始数据空间的主要变化信息，对过程的非正常变化做出反应，同时还能较正确地找出发生故障的原因以及相应环节。     

Characterization of edible oils,butters and margarines by Fourier transform infrared spectroscopy with attenuated total reflectance

The combination of attenuated total reflectance (ATR) and mid-infrared spectroscopy (MIRS) with statistical multidimensional techniques made it possible to extract relevant information from MIR spectra of lipid-rich food products. Wavenumber assignments for typical functional groups in fatty acids were made for standard fatty acids: Absorption bands around 1745 cm⁻¹, 2853 cm⁻¹, 2954 cm⁻¹, 3005 cm⁻¹, 966 cm⁻¹, 3450 cm⁻¹ and 1640 cm⁻¹ are due to absorption of the carbonyl group, C−H stretch, =CH double bonds of lipids and O−H of lipids, respectively. In lipid-rich food products, some bands are modified. Water strongly absorbs in the region of 3600–3000 cm⁻¹ and at 1650 cm⁻¹ in butters and margarines, allowing one to rapidly differentiate the foods as function of their water content. Principal component analysis was used to emphasize the differences between spectra and to rapidly classify 27 commercial samples of oils, butters and margarines. As the MIR spectra contain information about carbonyl groups and double bonds, the foods were classified with ATR-MIR, in agreement with their degree of esterification and their degree of unsaturation as determined from gas-liquid chromatography analysis. However, it was difficult to differentiate the studied food products in terms of their average chainlength.     

基于电容测量和PCA法的两相流相浓度检测方法

介绍利用电容层析成像系统阵列传感器结构和采样特点,引入主成分分析法(PCA)求取两相流相浓度的新方法.对大量测量值样本进行统计分析后,求出用测量值第一主成分求取相浓度的经验公式,仿真及静态实验表明:两者之间有着良好的对应关系,其测量结果不受两相流流型的影响,是一种有较好应用前景的测量方法.     

Efficient and accurate waveguide mode computation using BI‐RME and Lanczos methods

In this paper, a special purpose algorithm for solving large eigenvalue problems based on the Lanczos method is successfully applied to an engineering problem: the electromagnetic analysis and design of passive waveguide devices. For dealing with such complex problems, the boundary integral‐resonant mode expansion (BI‐RME) technique has been recently proposed. This technique solves integral equations (IEs) through the well‐known method of moments (MoM), thus leading to structured eigenvalue problems. These problems frequently become very large when solving complex arbitrary geometries with high accuracy. In such cases, the eigenvalue problem cannot be efficiently solved with standard methods by means of personal computers, essentially due to CPU time and memory allocation requirements. In this paper, we propose an alternative technique, based on the Lanczos method, for the fast and accurate solution of large BI‐RME generalized eigenvalue problems. The novel theoretical aspects of this approach, as well as the impacton the original BI‐RME formulation, are described. Comparative benchmarks are also successfully presented for the full‐wave analysis and design of real passive microwave devices. Copyright © 2005 John Wiley Sons, Ltd.     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry