Source number estimation and separation algorithms of underdetermined blind separation

Recently, sparse component analysis （SCA） has become a hot spot in BSS research. Instead of independent component analysis （ICA）, SCA can be used to solve underdetermined mixture efficiently. Two-step approach （TSA） is one of the typical methods to solve SCA based BSS problems. It estimates the mixing matrix before the separation of the sources. K-means clustering is often used to estimate the mixing matrix. It relies on the prior knowledge of the source number strongly. However, the estimation of the source number is an obstacle. In this paper, a fuzzy clustering method is proposed to estimate the source number and mixing matrix simultaneously. After that, the sources are recovered by the shortest path method （SPM）. Simulations show the availability and robustness of the proposed method.     

用水信用与风险管理系统

系统采用Oracle数据库作为开发平台,VB.net为开发工具研制而成。系统借鉴银行和电力企业信用等级评价的规则,结合水司水费收缴的历史纪录及各客户的实际情况,运用自动采集程序,从原有的营销系统和财务系统自动录入数据,再通过优化的模糊概率、神经网络程序,对用户进行交纳水费信用等级评定,建立客户交纳水费风险预警机制。     

应用于时频分析的低功耗短时傅里叶变换处理器

提出了一个应用于时频分析的短时傅里叶变换处理器.为了克服已有的离散短时傅里叶变换算法和结构的缺点,给出了一种基于快速傅里叶变换阵列的新结构.根据实际需要提出了一种新的高频域分辨率的SDF(Single-path Delay Feedback)结构FFT单元,和传统的SDF结构FFT单元相比,反馈FIFO的深度和蝶形单元的数量都有所降低.再加上开发窗函数的对称性和适当合并硬件资源,与原始设计相比处理器的功耗降低了20%.使用中芯国际0.18微米工艺实现之后,系统工作时钟可以达到200MHz,即该处理器可以满足同样频率的采样信号的实时时频分析需求.     

Using Wide Table to manage web data: a survey

With the development of World Wide Web (www), storage and utilization of web data has become a big challenge for data management research community. Web data are essentially heterogeneous data, and may change schema frequently, traditional relational data model is inappropriate for web data management. A new data model, called Wide Table (or WT for simplicity), was introduced for this task. There are several characteristics of the WT model. First, WT is usually highly sparsely populated so that most data can be fit into a line or record. Second, queries are composed on only a small subset of the attributes. Thus, existing query processing and optimization techniques for relational database with normalized tables will not work efficiently anymore. Furthermore, WT is usually of extremely large volume. It is thought that only large-scale distributed storage can accommodate themassive data set. In this paper, requirements and challenges to web data management are discussed. Existing techniques for WT, including logical presentation, physical storage, and query processing, are introduced and analyzed in detail.     

新型方波-直流电压信号的转换方法

围绕CCD(电荷耦合器件 )线阵在控制电路中的应用的难点 (如何将CCD输出的原始信号经过初步处理后所得的方波信号转换成直流电压信号 )进行了讨论和分析。首先介绍了两种传统的转换方法 ,并对这两种方法的优缺点进行了分析和比较。最后提出了一种新颖的转换方法 :基于滤波思想的方波 -直流电压信号的转换方法。经实验验证 ,这种方法所得的直流电压信号确实稳定、可靠     

LDPE／EVA／CPE并用微孔鞋底料的研制

采用模压法研究了化学交联LPDE/EVA/CPE并用微孔鞋底料的制造方法,着重讨论了LDPE/EVA/CPE并用比,不同种类的橡胶改性剂以及发泡剂、交联剂、填充剂用量对微孔鞋底物理机械性能的影响。实验结果表明,采用国产原料CPE,当LDPE:EVA:CPE=50:30:20时,并配以超细碳酸钙20份和其他助剂,可制得性能较好的微孔鞋底材料。     

PBT工程塑料生产中MFR的控制

针对使用BUSS捏合机生产聚对苯二甲酸丁二酯(PBT)过程中出现的熔体流动速率(MFR)与产品配方体系中低分子量PBT树脂用量间的异常关系进行了研究和分析。结果表明，混炼加工PBT时，产品的MFR取决于两个因素的综合作用，一为产品配方中高、低粘度树脂的比例；二为低分子量树脂对主机功率的影响。综合二者影响，PBT的MFR与低分子量PBT用量关系近似为y=0．0471x^2-3．6347x 107．83。     

低黄变和亲水性氨基聚硅氧烷的开发

概述了氨基聚硅氧烷的发展历程、特点及发展趋势,着重介绍了氨基聚硅氧烷的黄变机理,低黄变氨基聚硅氧烷、亲水性氨基聚硅氧烷的开发,以及氨基聚硅氧烷的生态环保性。     

环氧复合材料低温固化剂研究进展

低温固化(固化温度低于100℃)可获得高尺寸稳定性、低成本、力学性能优良的环氧复合材料,室温储存期长的低温固化剂体系是低温固化环氧复合材料的关键。重点探讨了微胶囊型、潜伏性以及其它改性环氧低温固化剂,展望了其未来前景及发展方向。     

低密度、高强度DG型高变催化剂的研制

本文叙述了一种适合大型氨厂使用的、堆密度低到1.25 kg·L^-1、还原态侧压强度高达350 N·cm^-1以上、本体含硫＜500 ppm(wt)、低温活性好的高温变换催化剂的研制开发过程 还介绍了催化剂制备工艺特点和工业试用效果。