单晶镍纳米薄膜单向拉伸破坏的分子动力学模拟

应用分子动力学方法模拟了单晶镍纳米薄膜受单向拉伸破坏的过程, 得出纳米尺度单晶镍薄膜的应力-应变关系、能量演化曲线和镍薄膜构型的变化及微损伤的形成和扩展过程. 模拟采用原子镶嵌势描述原子间作用, 得到镍单晶薄膜的弹性模量, 分析了拉伸过程中系统原子能量、应力变化和外荷载的关系. 结果表明: 纳米薄膜的自由表面影响拉伸过程中原子的运动和薄膜整体力学性能, 纳米薄膜破坏的几何特征是原子空位的连接和晶胞缺陷的扩展; 单晶的断裂接近脆性断裂, 模拟得到纳米薄膜的断裂强度符合Griffith脆性断裂的能量平衡理论.     

In对Sn-8Zn-3Bi无铅钎料润湿性的影响

首先采用铺展法测试了Sn-8Zn-3Bi-(0～5)In钎料合金的铺展性.结果表明,少量In的加入提高了钎料的润湿性.当In含量达到0.5%时(质量分数,下同),钎料在铜基底上的铺展面积最大.采用气泡最大压力法对Sn-8Zn-3Bi-(0～1.5)In钎料熔体进行了表面张力测试.加入0.5%的In大大降低了Sn-8Zn-3Bi钎料熔体的表面张力,但进一步增加In的含量导致熔体表面张力增大.最后采用润湿平衡法对上述钎料进行了润湿力测试.结果表明0.5%In的加入使合金的润湿力达到最大,其原因是钎料/铜界面的界面张力减小.     

Surface and Biocidal Properties of Gemini Cationic Surfactants Based on Propoxylated 1,6-Diaminohexane and Alkyl Bromides

Two new classes of gemini cationic surfactants—hexanediyl-1,6-bis[(isopropylol) alkylammonium] dibromide {in the abbreviation form: C_nC₆C_n[iPr-OH] and C_nC₆C_n[iPr-OH]₂; alkyl: C_nH_{2n + 1} with n = 9, 10, 12 and 14}—have been synthesized by interaction of alkyl bromides with N,N′-di-(isopropylol)-1,6-diaminohexane and N,N,N′,N′-tetra-(isopropylol)-1,6-diaminohexane. The surface tension, electrical conductivity, and dynamic light scattering (DLS) techniques were used to investigate the aggregation properties of the gemini cationic surfactants in aqueous solution. The formation of critical aggregates at two concentrations in an aqueous solution from obtained gemini cationic surfactants were determined via the tensiometric method. Thus, these gemini cationic surfactants start to form aggregates at concentrations well below their critical micelle concentrations (CMC). The surface properties and the binding degree (β) of the opposite ion were tested against the length of the surfactant hydrocarbon chain and the number of the isopropylol groups in the head group. By applying the DLS technique, it was explored that how the number of isopropylol groups in gemini cationic surfactants with C₁₂H₂₅ chain affects the sizes of micelles at concentrations greater than CMC. It was discovered that the obtained gemini cationic surfactants have a biocidal character.     

Synthesis,Micellization, and Surface Activity of Novel Linear-Dendritic Carboxylate Surfactants

Two generations of novel linear-dendritic carboxylate surfactants C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄ have been synthesized by the divergent method and their structures are characterized by ¹H Nuclear Magnetic Resonance and Infrared analysis. The electrical conductivity measurement is used to measure the Krafft temperatures of C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄, which are much smaller than those of the corresponding conventional surfactant sodium stearate. The markedly enhanced solubility of two linear-dendritic surfactants is ascribed to the high hydrophilicity of surfactant headgroups induced by the carboxylate and ester groups. The critical micelle concentration (CMC) values obtained from both the electrical conductivity and surface tension measurements indicate that the micellizations of linear-dendritic surfactants become favorable with the increase in the number of the surfactant headgroup. However, the surface activity parameters including the surface tension at the CMC, maximum surface excess, and minimum surface area reveal that C₁₈-G₁-(COONa)₂ exhibits greater efficiency in absorbing at the air/water interface compared to C₁₈-G₂-(COONa)₄, owing to their different steric repulsions of the surfactant headgroups. In addition, C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄ have higher emulsifying ability than the conventional surfactants sodium stearate and sodium octadecyl sulfate.     

有机涂层钢板生产线主要工艺

介绍了有机涂层钢板生产线上钢基板的预处理,全线张力控制,纠偏装置的布置,固化炉的选型.     

无机盐对新疆油田三元复合驱界面性能影响研究

界面性能对复合驱提高采收率有重大的影响,界面张力越低,洗油效率越高;Zeta电位越高,油水乳状液越稳定。研究了各类无机盐对新疆油田复合驱界面性能的影响。结果显示,Zeta电位的绝对值随着无机盐浓度的增高而增大;无机碱中,碳酸根离子降低界面张力效果最好,氢氧根次之,碳酸氢根最差;阳离子中,钾离子降低界面张力效果最好,其次是钠离子,镁离子会略微提高界面张力,钙离子则会大幅度提高界面张力;阴离子中,与硫酸根相比,氯离子能更好地降低界面张力。通过以上研究,确定了Q站污水处理站外排水更适合三元复合驱配液。     

TEMPERATURE DEPENDENCE UPON VISCOSITY OF Ni-P ALLOY ON AMORPHOUS FORMATION

The viscous flow of amorphous alloys near T_gis closely related to the viscosity of liquid alloys.On the basis of the measured surface tension and density for Ni-P binary alloys,the correla-tion between the viscosity of the melt and viscous flow process of the amorphous alloy is inves-tigated.The relationship between viscosity and temperature for Ni-P alloys going from liquidto amorphous solid may be described by the following formula:     

Thermodynamic study of the phase equilibria in the Sn−Ti−Zn ternary system

The Sn−Ti−Zn ternary phase diagram has been constructed using the CALPHAD technique. The Ti−Zn binary system phase boundaries were determined using differential scanning calorimetry and the solid-liquid diffusion couples method. In addition, the formation energy of some stoichiometric compounds was obtained using first-principle band energy calculations. For the ternary system, some alloys were prepared by equilibration at 600 or 700 °C, and the compositions of the precipitates were analyzed using electron probe microanalysis. Thermodynamic assessment of the Ti−Zn and Sn−Ti−Zn systems was performed based on the experimental information and by adopting reported values of the thermodynamic properties of the Sn−Zn and Sn−Ti binary systems. Microstructural observation showed that Sn₃Ti₅Zn₁₂ exists in the ternary system. Seven types of invariant reaction on the Sn-rich liquidus surface of the ternary system are predicted by the phase diagram calculations. The ternary eutectic point falls at 0,0009 mass% Ti and 8.69 mass% Zn, at T=192.40°C, which is slightly lower than the calculated eutectic point of Sn−Zn binary alloy (T=192.41°C). Based on these results, a nonequilibrium solidification process using the Scheil model was simulated. This paper was presented at the International Symposium on User Aspects of Phase Diagrams, Materials Solutions Conference and Exposition, Columbus, Ohio, 18–20 October, 2004.     

8098单片机在轧机控制系统中的应用

在轧机速度控制和张力控制中采用8098单片机控制系统，使其速度控制精度和张力控制精度得到明显提高；系统还具有运行可靠、调试与维护方便、组成系统成本低等优点。     

CO2气体保护焊表面张力过渡

CO2气体保护焊采用短路过渡,飞溅大、成形差.在研究CO2气保焊短路过渡理论基础上,深入研究了表面张力过渡各个阶段参数与送丝速度的关系、焊接电压与液桥缩径状态的检测方法.研究表明,在表面张力过渡区内存在一段失控区,增加了表面张力过渡的不确定性.随着送丝速度的变化,熔滴过渡各阶段时间影响液桥分断时的表面张力过渡.依据表面张力过渡对电源特性的要求,提出了两种实现方案,逆变环节控制和输出斩波控制,并指出仅采用逆变环节实现表面张力控制的局限性,研究还表明改变表面张力过渡区的电流值可改善过渡的稳定性.研究方案在实际中得到了验证.