示例学习的广义扩张矩阵算法及其实现

本文对扩张矩阵理论加以扩充，提出关于公式的扩张矩阵的概念，并据此实现一个广义扩张矩阵算法叫做ＡＥ９，本文还将ＡＥ９和ＡＱ１５应用于几个实际领域的学习问题，如睡眠状态的分类，手写数字识别等，结果都表明ＡＥ９比ＡＱ１５分类精度更高。     

A singular loop transformation framework based on non-singular matrices

In this paper, we discuss a loop transformation framework that is based on integer non-singular matrices. The transformations included in this framework are called Λ-transformations and include permutation, skewing and reversal, as well as a transformation calledloop scaling. This framework is more general than existing ones; however, it is also more difficult to generate code in our framework. This paper shows how integer lattice theory can be used to generate efficient code. An added advantage of our framework over existing ones is that there is a simple completion algorithm which, given a partial transformation matrix, produces a full transformation matrix that satisfies all dependences. This completion procedure has applications in parallelization and in the generation of code for NUMA machines. This work was supported by the Cornell Theory Center, NSF Presidential Young Investigator award #CCR-8958543. by NSF Grant #CCR-9008526, and by a grant from the Hewlett-Packard Company.     

基于企业门户统一认证系统的设计与实现

企业门户的统一身份认证可以解决多个系统独立认证的弊端,消除企业中的信息孤岛。文章根据企业中信息系统的特点和项目的时间和成本要求,对基于企业门户的统一认证系统进行了设计与实现,对其他企业门户项目中的相关工作具有一定的借鉴作用。     

基于计算的工业喷涂机器人基本参数设计方法

设计与确定机器人参数需要在各项性能之间进行折衷,常常是一个耗时的迭代过程。本文提出了一种工业喷涂机器人基本参数确定的一般方法。通过喷涂机器人的设计与开发过程,基于机器人建模方法,归纳出机器人基本参数对各项性能尤其是工作空间特性的影响因素与规律,并在此过程中上分析了其结构参数对机器人工作空间和性能的影响,从而得出了机器人工作空间特性与结构参数之间的内在联系,为工业机器人的设计提供依据。     

Efficient removal of boundary-divergence errors in time-splitting methods

A normal mode analysis is presented and numerical tests are performed to assess the effectiveness of a new time-splitting algorithm proposed recently in Karniadakiset al. (1990) for solving the incompressible Navier-Stokes equations. This new algorithm employs high-order explicit pressure boundary conditions and mixed explicit/implicit stiffly stable time-integration schemes, which can lead to arbitrarily high-order accuracy in time. In the current article we investigate both the time accuracy of the new scheme as well as the corresponding reduction in boundary-divergence errors for two model flow problems involving solid boundaries. The main finding is that time discretization errors, induced by the nondivergent splitting mode, scale with the order of the accuracy of the integration rule employed if a proper rotational form of the pressure boundary condition is used; otherwise a first-order accuracy in time similar to the classical splitting methods is achieved. In the former case the corresponding errors in divergence can be completely eliminated, while in the latter case they scale asO(vt)_1/2.     

福禄宫“蝼蜂窠”制作技术初探

福禄宫位于湖南长沙市城西区,始建于清代光绪年间。解放后,福禄宫因未及时修理维护,朽损情况严重,1983年底被拆毁。通过对残留木制装修构件拼凑,推算出该建筑的蝼蜂窠部分测绘图。福禄宫蝼蜂窠类似于北方斗栱中的平身科,是一种装饰性构件。福禄宫的昂嘴采用翼龙飞凤交错排列的形式,部分昂嘴端部另加雕饰花板。蝼蜂窠采用层层叠置出踩的形式,其表面只施以桐油或光油等透明涂料,未施其它色漆及彩绘。     

针对无网格并行计算的基于模糊均值聚类的分区方法*

针对国际上普遍采用的基于回归几何二分的分区方法的缺陷,提出了基于模糊均值聚类的均匀模糊均值聚类分区算法。采用该方法对不同类型的无网格几何模型进行了分区,并根据分区信息对三维实体模型进行了并行计算。通过与基于回归几何二分法的比较,充分验证该算法的有效性和可行性。     

斜压状态下托轮滚圈多体接触的力学特征

根据滚圈处筒体的变形及力平衡条件,建立了计算滚圈与筒体间接触压力分布的数学模型。研究了斜压状态下托轮滚圈多体接触模型的特点,开发了斜压接触下托轮滚圈有限元建模程序,该程序适用于任何载荷、载荷比、偏斜角下托轮滚圈的接触有限元分析。应用均匀设计法,设计了托轮与滚圈多体接触的有限元计算方案,通过计算,得出了托轮与滚圈的应力及变形情况。通过对滚圈的变形椭圆度和内、外表面的最大等效应力进行多元线性回归,得到了滚圈的变形椭圆度和内、外表面的最大等效应力随支承载荷、载荷比、托轮偏斜角的变化公式。     

直流闭锁故障下风电并网功率和直流输送功率的耦合关系分析

中国一次能源和负荷成逆向分布,新能源基地集群通过特高压直流群外送,新能源高占比电网中风电和直流耦合关系复杂。首先,建立电网分析模型,研究风电和直流在电网频率、电压方面的耦合关系。其次,根据最大频率偏差耐受能力,计算风电和直流在频率方面的耦合关系。再次,根据直流闭锁故障后风电暂态过电压总脱网量约束,推导风电并网点的暂态压升,计算暂态压升和脱网量的关系,得到直流和风电在暂态过电压方面的耦合关系。理论计算结果表明：风电和直流呈负相关性。根据2020年西北电网青豫直流和近区风电并网功率的仿真结果,验证了理论推导的正确性。     

Effect of ammonia concentrations on SCC of α-brass under mode III loading

Stress corrosion cracking (SCC) of α-brass in ammonia solution was studied under mode III loading. The results showed that SCC occurred on the principal stress planes where shear stresses are zero. No SCC occurred on the maximum shear stress plane. Ammonia concentration affected fracture behaviour. When the concentration was low, many cracks with spacing of 10–150 μm were found on 45 ° planes, i.e., the principal stress planes. When the concentration was high, the cracks on 45 ° planes were not clearly visible because of serious general corrosion.