Investigation on sulphonated zinc oxide nanorod incorporated sulphonated poly (1,4-phenylene ether ether sulfone) nanocomposite membranes for improved performance of microbial fuel cell

Hydrothermally prepared zinc oxide nanorods are sulphonated (S–ZnO NR) and incorporated into 15% Sulphonated Poly (1,4-Phenylene Ether Ether Sulfone) (SPEES) to improve the hydrophilicity, water uptake and ion transfer capacity. Water uptake and ion transfer capacity increased to 34.6 ± 0.6% and 2.0 ± 0.05 meq g^?1 from 29.8 ± 0.3% and 1.4 ± 0.04 meq g^?1 by adding 7.5 wt% S–ZnO NR to SPEES. Morphological studies show the prepared S–ZnO NR is well dispersed in the polymer matrix. SPEES +7.5 wt% S–ZnO NR membrane exhibits optimum performance after three-weeks of continual operation in a fabricated microbial fuel cell (MFC) to produce a maximum power density of 142 ± 1.2 mW m^?2 with a reduced biofilm compared to plain SPEES (59 ± 0.8 mW m^?2), unsulphonated filler incorporated SPEES (SPEES + 7.5 wt% ZnO, 68 ± 1.1 mW m^?2) and Nafion (130 ± 1.5 mW m^?2) thereby suggesting its suitability as a sustainable and improved cation exchange membrane (CEM) for MFCs.     

Microstructure evolution during batch annealing

Design of industrial annealing cycles requires recrystallization and grain growth studies, which are typically carried out under isothermal laboratory condition. The kinetics coefficients of these phase transformations are obtained from such studies, which are subsequently used in designing the industrial nonisothermal cycles using the additivity principles. However, the strong heating rate effects on the grain growth kinetics necessitate such kinetics studies using industrial thermal profiles. In the present work, the hot and cold spot cycles of an industrial batch annealing cycle for AIK grade steel have been simulated in a programmable laboratory furnace. Subsequently, the effect of annealing temperature, soaking time, and heating rate on the microstructural features, such as grain size distribution, grain shape anisotropy, and grain orientation, have been investigated through extensive quantitative microscopy. The implications of these results on the design of industrial batch annealing cycles have been discussed.     

Performance of orthogonal frequency division multiplexing based M-ary quadrature amplitude modulation in asymmetrical dual-hop mixed RF-FSO transmission system

This paper investigates the performance of a dual-hop mixed relay system with radio frequency (RF) and free-space optics (FSO) communication under the effect of pointing error (PE) and atmospheric turbulence (AT). This paper considers a system where RF and FSO links are cascaded. The RF link is modeled by Nakagami-m fading, and the FSO link is modeled as gamma–gamma (G-G) fading channel. Both the channel models use orthogonal frequency division multiplexing (OFDM) with M-ary quadrature amplitude modulation (QAM). The expressions for probability density function, cumulative distribution function, signal-to-noise ratio, and ergodic capacity are derived. The moment generating function (MGF) of fading and the bit error rate (BER) of the OFDM-based M-ary QAM scheme is derived in terms of Meijer's G-function. It has been observed that, in fixed gain relay systems, the modulation scheme's BER is dominated by the SNR of the RF link. While in a variable gain relay system, the turbulence conditions of the FSO system affect the SNR and the BER of the modulation method. The feasibility of heterodyne detection and intensity modulation direct detection (IM/DD) is analyzed in terms of outage probability and ergodic capacity. The results can be used to choose the optimal modulation order and relay system for QAM-OFDM-based optical wireless systems.     

A Consortium Blockchain Based Overseas Fund Transfer System

Domestic fund transfers are all the time immediate, handier and obtainable however in overseas fund transfer, funds are transferred from payers account to payees account through the correspondent banks, central bank and messaging network which involves intermediaries and allied charges. Blockchain Technology has grabbed the interest of financial systems due to its inventive benefits such as decentralised structure, faster speed, cost-effectiveness and more security over conventional approaches. Adopting Blockchain Technology for overseas fund transfer can overcome the transaction delays, intermediaries’ failures and recurring costs involved in the current system. In this paper, a Consortium Blockchain based overseas fund transfer process is proposed to achieve faster operations, security and transparency. Hyperledger Fabric Blockchain framework has been used for overseas fund transfer process and web-user interface is developed for the same. Simulation results demonstrate the significance of Blockchain as a promising technology for overseas fund transfer process to facilitate speed, security, transparency and efficiency for overseas fund transfer.

     

Understand Students Feedback Using Bi-Integrated CRF Model Based Target Extraction

Educational institutions showing interest to find the opinion of the students about their course and the instructors to enhance the teaching-learning process. For this, most research uses sentiment analysis to track students’ behavior. Traditional sentence-level sentiment analysis focuses on the whole sentence sentiment. Previous studies show that the sentiments alone are not enough to observe the feeling of the students because different words express different sentiments in a sentence. There is a need to extract the targets in a given sentence which helps to find the sentiment towards those targets. Target extraction is the subtask of targeted sentiment analysis. In this paper, we proposed the innovative model to find the targets of the given sentence using Bi-Integrated Conditional Random Fields (CRF). A Parallel fusion neural network model is designed to perform this task. We evaluate the model using the Michigan dataset and we build a dataset for target extraction from student reviews. The experimental results show that our proposed fusion model achieves better results compared to baseline models.     

Fabrication, characterization and invitro bioactivity evaluation of QPSU/TiO2 composite membranes

Quaternized Polysulfone (QPSU) is a widely investigated material in the industry because of its unique properties such as resistance to corrosion and high mechanical properties. The ionic nature of the compound can be exploited for medical applications such as in haemodialysis, drug delivery and tissue engineering. In this study, composite membranes of QPSU with varying concentrations of Titanium oxide (TiO₂) were prepared and characterized using FT-IR, ¹H-NMR, XRD, TGA and SEM. The bioactivity of the membranes was studied by immersing them in simulated body fluid (SBF) for 7 days and subsequently observing under SEM for the formation of calcium-phosphate (Ca–PO₄) layer on the surface of the membranes. The formation of Ca–PO₄ on the samples was confirmed using FT-IR and EDAX. The results were compared with those obtained for QPSU membranes and the effect of TiO₂ concentration on the membrane properties was analyzed. It was observed that the percentage crystallinity of the composites increased upto a filler concentration of 5 wt% beyond which it decreased. TGA studies revealed an increase in the thermal stability of the composites with increasing filler concentrations. While optimum bioactivity was observed in the samples containing 5 wt% of TiO₂, higher filler content resulted in the formation of denser calcium—phosphate layer on the surface of the composites. The study shows that quaternized polysulphone/TiO₂ composites are promising bio composites having great potential for application in health care.     

Provitamin‐A and xanthophyll carotenoids in vegetables and food grains of nutritional and medicinal importance

This study reports carotenoid composition of vegetables (n = 56), cereals (n = 12), pulses and legumes (n = 12), analysed by HPLC. It was hypothesised that food grains, like vegetables may be good sources of carotenoids. Amongst vegetables, higher level (mg/100 g dry weight) of lutein (210–419) was detected in green/red/capsicum and yellow zucchini, whilst zeaxanthin was dominant in kenaf (4.59). β‐Carotene (mg/100 g dry weight) was higher in green capsicum and kenaf (48,159) whilst carrot, ivy gourd and green capsicum contain α‐carotene (22–110). Amongst food grains, chickpea, split red gram and flaxseed contain higher levels (μg/100 g dry weight) of lutein (185–200) whilst zeaxanthin level was highest in puffed chickpea (1.8). Red unpolished parboiled rice was richest (μg/100 g dry weight) in β‐carotene (67.6) whilst whole black gram contained higher levels of α‐carotene (52.7). Thus, results indicate that chickpea and red unpolished parboiled rice are good sources of carotenoids. These carotenoid‐rich vegetables and grains may be exploited to meet the lutein and β‐carotene requirement.     

Suppression of phonon‐mediated hot carrier relaxation in type‐II InAs/AlAsxSb1 − x quantum wells: a practical route to hot carrier solar cells

InAs/AlAs_xSb_{1 − x} quantum wells are investigated for their potential as hot carrier solar cells. Continuous wave power and temperature‐dependent photoluminescence indicate a transition in the dominant hot carrier relaxation process from conventional phonon‐mediated carrier relaxation below 90 K to a regime where inhibited radiative recombination dominates the hot carrier relaxation at elevated temperatures. At temperatures below 90 K, photoluminescence measurements are consistent with type‐I quantum wells that exhibit hole localization associated with alloy/interface fluctuations. At elevated temperatures, hole delocalization reveals the true type‐II band alignment, where it is observed that inhibited radiative recombination due to the spatial separation of the charge carriers dominates hot carrier relaxation. This decoupling of phonon‐mediated relaxation results in robust hot carriers at higher temperatures, even at lower excitation powers. These results indicate type‐II quantum wells offer potential as practical hot carrier systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Performance Analysis of Downlink W-CDMA Systems in Weibull and Lognormal Fading Channels Using Chaotic Codes

In this paper, a subspace based blind channel estimation scheme for downlink W-CDMA systems using chaotic codes under Weibull and Lognormal fading channel conditions is proposed and compared with W-CDMA system using PN codes. The algorithm provides estimates of multiuser channels by exploiting the structural information of the data output. The subspace of the (data + noise) matrix contains sufficient information for unique determination of channels and, hence, the signature waveforms and signal constellations. The proposed channel estimation algorithm is also implemented for multiuser—orthogonal frequency division multiplexing (OFDM) system. Performance measures like bit error rate (BER) and root mean square error (RMSE) are plotted for Weibull and Lognormal fading channels. Signal constellations under Weibull and Lognormal channels are also plotted. Analytical and Simulation results for BER and RMSE are compared for W-CDMA system using PN codes and chaotic codes. Simulation results show that, chaos-based W-CDMA outperforms the PN-based W-CDMA in terms BER and RMSE. Simulation results of multiuser-OFDM system shows that performance is further improved when compared to the W-CDMA system.     

Escherichia coli, enterococci, and Bacteroides thetaiotaomicron qPCR signals through wastewater and septage treatment

Fecal indicators such as Escherichia coli and enterococci are used as regulatory tools to monitor water with 24 h cultivation techniques for possible input of sewage or feces and presence of potential enteric pathogens yet their source (human or animal) cannot be determined with routine methods. This critical uncertainty has furthered water pollution science toward new molecular approaches. Members of Bacteroides genus, such as Bacteroides thetaiotaomicron are found to have features that allow their use as alternative fecal indicators and for Microbial Source Tracking (MST). The overall aim of this study was to evaluate the concentration and fate of B. thetaiotaomicron, throughout a wastewater treatment facility and septage treatment facility. A large number of samples were collected and tested for E. coli and enterococci by both cultivation and qPCR assays. B. thetaiotaomicron qPCR equivalent cells (mean: 1.8 × 10⁷/100 mL) were present in significantly higher concentrations than E. coli or enterococci in raw sewage and at the same levels in raw septage. The removal of B. thetaiotaomicron target qPCR signals was similar to E. coli and enterococci DNA during the treatment of these wastes and ranged from 3 to 5 log₁₀ for wastewater and was 7 log₁₀ for the septage. A significant correlation was found between B. thetaiotaomicron marker and each of the conventional indicators throughout the waste treatment process for both raw sewage and septage. A greater variability was found with enterococci when compared to E. coli, and CFU and equivalent cells could be contrasted by various treatment processes to examine removal and inactivation via septage and wastewater treatment. These results are compared and contrasted with other qPCR studies and other targets in wastewater samples providing a view of DNA targets in such environments.