Dissimilar Metal Joining of 304 Stainless Steel to SMA490BW Steel Using the Filler Metal Powders with a High-Entropy Design

Metals and Materials International - High-entropy alloys having excellent properties are particularly suitable for the application as the filler metals in welding. In the present study,...     

Operation of a stationary hydrogen energy system using TiFe-based alloy tanks under various weather conditions

We describe the operation of a bench-scale stationary hydrogen energy system comprising photovoltaic (PV) panels, a water electrolyzer (Ely), metal hydride tanks fabricated using an AB-type TiFe-based alloy (TiFe-based tanks), fuel cells (FC), and batteries under various weather conditions. The FC and TiFe-based tanks are thermally coupled to transfer heat when necessary to stabilize the output power, and automatic control is provided via a building energy management system (BEMS), which plans the operating schedule up to 48 h in advance based on the weather forecast and expected demands of the building. Experiments were conducted for 24-h operation on a fine day, 48-h operations on partly cloudy and partly cloudy days, and 48-h operations on partly cloudy and rainy days in order to verify the system. Each operation was performed as planned. Our results show that it is possible to operate the hydrogen system all year round without external heat sources.     

Phase stability and thermo-physical properties of ZrO2-CeO2-TiO2 ceramics for thermal barrier coatings

The properties of ZrO₂ co-stabilized by CeO₂ and TiO₂ ceramic bulks were investigated for potential thermal barrier coating (TBC) applications. Results showed that the (Ce_0.15Ti_x)Zr_0.85-xO7 (x?=?0.05, 0.10, 0.15) compositions with single tetragonal phase were more stable than the traditional 8YSZ at 1573?K. These compositions also showed a large thermal expansion coefficient (TEC) and a high fracture toughness, which were comparable to those of YSZ. However, the phase stability, fracture toughness and sintering resistance of the CeO₂-TiO₂-ZrO₂ system showed a decline tendency with the increase of TiO₂ content. The TEC of the ceramic bulks decreased with increase of TiO₂ content as well because the crystal energy was enhanced with increasing substitution of Zr⁴⁺ by smaller Ti⁴⁺. The (Ce_0.15Ti_0.05)Zr_0.8O₂ had the best comprehensive properties among the (Ce_0.15Ti_x)Zr_0.85-xO₂ compositions as well as a low thermal conductivity. Therefore, it can be explored as a TBC candidate material for high-temperature applications.     

采用磁流变阻尼器的人体座椅悬架系统模糊ANFIS-PID复合控制技术研究

对座椅悬架用单出杆式磁流变阻尼器进行阻尼特性试验,并借助MATLAB多项式拟合工具箱对改进多项式模型中未知参数进行辨识。分析人体振动特性,建立五自由度人体座椅悬架模型。综合模糊控制器与自适应模糊神经推理系统(Adaptive Neuro-Fuzzy Inference System,ANFIS)整定PID控制器的优点,提出一种模糊ANFIS-PID复合控制策略。采用正弦信号作为外界激励,分别对被动悬架、传统模糊控制、ANFIS-PID控制及模糊ANFIS-PID复合控制人体座椅悬架系统进行仿真分析。结果表明,辨识得出的参数和建立的改进多项式模型均可满足后续仿真要求;采用模糊ANFIS-PID复合控制策略的隔振效果明显优于传统模糊控制及ANFIS-PID控制,能有效改善人体座椅悬架系统的行驶平顺性及驾乘人员乘坐舒适性。     

某轻型载货车储气罐支架振动断裂分析与优化

为了有效解决某轻型载货车储气罐支架的断裂故障,首先基于建立的储气罐支架有限元模型进行振动特性分析,分析结果表明其前三阶固有频率接均处于发动机激励频率范围之外,不会产生共振。其次测试各种道路的时域载荷,测试结果表明其中角度搓板路的激励频率与储气罐支架第一阶固有频率相接近,从而引起共振,不满足振动特性要求。然后对其进行振动强度分析,分析结果表明其应力水平不达标,其最大应力点与开裂处一致。再对其进行振动疲劳寿命预测分析,分析结果表明其疲劳寿命也不达标,其危险点也与失效位置相同。再采用集成平台对储气罐支架的结构进行优化设计,优化之后其模态频率、振动强度和振动疲劳均符合性能要求,并且其重量也有所减轻,总体优化效果较佳。最后整车试验结果表明优化之后储气罐支架的振动大幅度降低,并且没有发生失效。     

生物质源多孔碳制备及其对废水中药物吸附研究进展

城市现代化与工业化的快速发展给环境造成的污染日趋严重，尤其以水体污染最为明显。近年来，工业废水中药物的含量逐年上升，污染程度已经不容忽视。因此，开发新型多孔材料用于废水中药物分子的吸附分离，已经成为了当前的研究热点。综述了近年来生物质源多孔碳（生物炭）在废水中污染物吸附分离方面的研究，首先简单介绍了废水中污染物的治理方法，在此基础上重点探讨了生物炭的制备与修饰，并结合碳材料表面化学性质与孔道结构，总结并展望了生物炭对药物的吸附性能。     

Difference angle quantization index modulation scheme for image watermarking

In this paper, we propose a new angle quantization index modulation (AQIM) method, called the difference AQIM (DAQIM) method. The proposed method aims to improve the watermarking performance against gain attacks. Unlike the original AQIM method (Ourique et al., Angle QIM: a novel watermark embedding scheme robust against amplitude scaling distortions, in: Proceedings of IEEE International Conference on Acoustics, Speech, and Signal Processing, vol. 2, 2005, pp. 797–800), the DAQIM method quantizes the difference of the two angles instead of the angles themselves. The main advantage of the DAQIM method is to disperse the interference to the watermark signal from one angle to more angles. Thus, the watermark has a higher ability to resist attacks. We perform a theoretical analysis of the document-to-watermark ratio (DWR) based on our proposed method. We show that our proposed method can obtain a lower embedding distortion compared to the AQIM and the gradient direction watermarking (GDWM) (Nezhadarya et al., IEEE Trans. Inf. Forensics Secur., 6(4), 2011, 1200–1213), methods under the same robustness and payload conditions. The experimental results demonstrate that our proposed method outperforms common existing methods in terms of the robustness against various attacks such as the JPEG quantization noise, additive white Gaussian noise (AWGN), cropping effect and mean filtering.     

Remaining useful life prediction for degrading systems with random shocks considering measurement uncertainty

Degradation data have been widely used for the remaining useful life (RUL) prediction of systems. Most existing works apply a preset model to capture the degradation process and focus on the degradation process without shocks or constant shock effects. More generally, the actual degradation path is unobservable due to the existence of measurement uncertainty, which interferes with the determination of the degradation model. Besides, the effect of random shocks is usually fluctuating. Given these problems, a general degradation model with the random shock fluctuant effects considering the measurement uncertainty is first developed to describe the degradation process, and a two-step approach combining the arithmetic average filter and the Bayesian information criterion is adopted to identify the degradation path. Subsequently, the transfer processes of the actual degradation state and the abrupt change caused by shocks are depicted using a two-dimensional state-space model, and an expectation-maximization algorithm combined with the particle filtering is developed for parameter estimation. Furthermore, the explicit solution of RUL distribution is obtained when only considering harmful shocks, while a simulation method of RUL distribution is provided when both harmful and beneficial shocks exist. Finally, the effectiveness of the proposed method is verified by a numerical example and two practical case studies.     

水深环境下湿法焊接声压替代图像信号可行性分析

水深环境下水下湿法药芯焊丝焊接(FCAW)受周围电弧气泡生长的影响，其状态需要通过信号采集. 文中首先搭建水下湿法焊接试验平台，进行湿法药芯焊丝焊接试验，对焊接过程中的气泡声压信号、高速摄像信号、电弧电流电压信号，进行同步采集；然后对比了引弧阶段下浅水和20 m水深的气泡动态演变图像及其声压信号，结合20 m水深稳弧阶段信号，发现气泡脉冲声信号与气泡图像在气泡大小、爆破周期等演变细节上有着很好的对应关系，但随着水深增加，烟尘导致图像信号更加模糊. 最后对水下20，40 m的环境中获取到的电弧从引弧到稳弧阶段的声电信号，进行对照分析. 结果表明，气泡声压信号可以清晰地反映出气泡的变化状态，深水下声压信号替代高速摄像具有可行性.