基于负荷预测的0.4 kV配网低电压风险评估方法

我国现阶段的配电网网架结构依然十分薄弱,智能化水平低,缺乏先进的检测技术和高效的运维模式。在现阶段低压电气信息不开源的情况下,为解决0.4 kV配网无差别运维效率低的问题,文章分析了适用于低压配网状态评估的评价维度,并基于负荷预测结果提出了低压台区低电压风险评估方法,引入了微增容量所引起的压降比,实现对低电压风险的定期管控。该文对于优化低压配电网运维资源配置、指导低压配网差异化运维模式的建立,以及提高低压配电网运维整治效率具有一定的参考价值。     

Experimental study on the behavior of eccentrically loaded circular footing model resting on reinforced sand

In this study, an experimental investigation has been conducted on a circular footing model subjected to eccentric load resting on the geonet-reinforced sand. To this end, five series of tests were carried out in order to evaluate the effect of reinforcement dimension and eccentricity on the bearing capacity, settlement, and rotation of the footing. Results show that the bearing capacity ratio (BCR) is in direct relationship with eccentricity and the impact of soil reinforcement at low settlements is much more significant in the case of eccentric loading. Additionally, the bearing capacity interaction diagram and variation in the position of rotation line at different load levels for reinforced and unreinforced conditions are presented.     

楼宇型分布式能源系统设备容量和运行策略优化研究

设备容量优化和运行策略优化是分布式能源系统设计，运行的关键问题。为实现分布式能源系统的经济效益，能效水平和环境效益最大化，针对楼宇型分布式能源系统建立了相对普适化的物理模型和数学模型，以粒子群优化算法和线性规划相结合，采用两阶段优化方法计算系统的最优容量配置，并给出运行策略。以某写字楼的分布式能源系统为例，得到最优的系统设备容量和全年逐时运行策略，并采用遍历法验证计算结果的准确性。优化的分布式能源系统与传统供能系统相比，费用年值降低7.79%，年总能耗降低24.18%，污染物排放量减少了62.77 %。     

Effects of hydroxyl radical induced oxidation on water holding capacity and protein structure of jumbo squid (Dosidicus gigas) mantle

Protein oxidation is considered as an important issue in food preservation process. In the present study, the potential influence of protein oxidation on water holding capacity and protein structure of jumbo squid (Dosidicus gigas) mantle was investigated. After the hydroxyl radical oxidation, it was found that the carbonyl, surface hydrophobicity and dityrosine content of myofibrillar protein significantly increased (P < 0.05), while the content of total sulphydryl decreased significantly (P < 0.01). Meanwhile, the fluorescence intensity of squid was weakened, and the maximum absorption peak of fluorescence red shift as the H₂O₂ concentration increased. The sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) showed that not only the protein cross-linking but also degradation could have occurred. The content of α-helix decreased, the content of β-sheet, β-turn and the unordered structures increased after oxidation. In addition, oxidation resulted in a decrease in water holding capacity. Taken together, oxidation resulted in the damage of the myofibrillar structure, the increase in muscle loss rate and the decrease in water holding capacity.     

Removal of copper(II) from aqueous solution using chemically modified fruit peels as efficient low-cost biosorbents

Fruit peels, which are common agricultural byproducts, have been extensively used as abandoned or low-cost biosorbents to remove heavy metals. In this study, dragon fruit peel (DFP), rambutan peel (RP), and passion fruit peel (PFP) were used to remove Cu(II) ions from an aqueous solution. Concentrations of the adsorbed metal ions were determined using the atomic absorption spectroscopic method. Adsorption experiments were performed with different adsorbent dosages, pH values, contact times, and initial copper concentrations. The optimum set of conditions for biosorption of Cu(II) ions was found to be an adsorbent dosage of 0.25 g, a contact time of 180 min, an initial concentration of 100 mg/L, a pH value of 4 for RP and PFP, and a pH value of 5 for DFP. The adsorption conformed with the pseudo-second-order kinetic model. The adsorption data were consistent with the Langmuir and Freundlich isotherm models, but the best fit was with the Langmuir model. The Langmuir monolayer adsorption capacity values of DFP, RP, and PFP were calculated to be 92.593, 192.308, and 121.951 mg/g, respectively. RP showed a higher adsorption capacity of Cu(II) ions than PFP and DFP for all parameters. The results indicate that these biosorbents might be used to effectively adsorb Cu(II) ions from wastewater treatment plants.     

Synthesis of strontium (Sr) doped hydroxyapatite (HAp) nanorods for enhanced adsorption of Cr (VI) ions from wastewater

The development of high-efficiency adsorbents for heavy metal ion removal from wastewater is highly desirable and challenging due to their synthesis complexity and low adsorption capacities. Herein, we reported the synthesis of strontium (Sr) doped hydroxyapatite (HAp) for the increased Cr (VI) adsorption. The effects of pH, temperature, and time on adsorption performances were studied. As a result, the Sr-HAp nanorods can achieve a Cr (VI) adsorption capacity of 443 mg/g, which is significantly higher than that of HAp nanorods (318 mg/g). To better understand the adsorption mechanism, the Langmuir isotherm model was established. The modeling results indicated that Langmuir monolayer chemical adsorption contributed to the efficient Cr (VI) ion removal for Sr-HAp nanorods adsorbents. The surface area and surface functional groups (O–H) contributed to the different Cr (VI) adsorption capacities between HAp and Sr-HAp.     

Heat capacities and standard entropies and enthalpies of some compounds essential for steelmaking and refractory design approximated by Debye-Einstein integrals

Heat capacity data for compounds located in the binary CaO–SiO₂, CaO–Al₂O₃ and MgO–Al₂O₃ systems are fitted by Debye-Einstein integrals. Starting from the fitted heat capacities, the standard values of the thermodynamic functions of these compounds are calculated. In almost all cases investigated, the derived standard entropies are within the uncertainties of the values provided in literature. The Debye-Einstein coefficients obtained in this thermodynamic assessment can be used to approximate the heat capacities, enthalpies and entropies of these compounds in the temperature range from 0 to 298.15 K.     

Hydrogen storage and electrochemical properties of annealed low-Co AB5 type intermetallic compounds

The structure, hydrogen storage and electrochemical properties of annealed low-Co AB₅-type intermetallic compounds have been investigated. La-alloy, Nd-alloy and Cr-alloy are used to represent La_0.8Ce_0.2Ni₄Co_0.4Mn_0.3Al_0.3, La_0.6Ce_0.2Nd_0.2Ni₄Co_0.4Mn_0.3Al_0.3 and La_0.6Ce_0.2Nd_0.2Ni_3.8Co_0.4Mn_0.3Al_0.3Cr_0.2, respectively. The XRD results indicated that annealed samples are all single-phase alloys with CaCu₅ type structure. The maximum of both hydrogen content and discharge capacity is obtained for La-alloy 1.23 wt%H₂ and 321.1 mA h/g, respectively. All the investigated alloys are quiet stable with ΔH of hydrogen desorption about 36–38 kJ/mol H₂. Cycle life of alloy electrode has been improved by partial substitution of La for Nd and Ni for Cr. The highest capacity retention of 92.2% after 100 charge/discharge cycles at 1C has been observed for Nd-alloy. The hydrogen diffusion coefficient measured by PITT is higher at the start of charging process and dramatically reduces by 2–3 order of magnitude with saturation of β-hydride. The highest value 6.9 × 10^?13 cm²/s is observed for La alloy at 100% SOC. Partial substitution La for Nd and Cr for Ni in low-Co AB₅ metal hydride alloys slightly reduces maximum discharge capacity, HRD performance and hydrogen diffusion kinetics. Low-Co alloys show good overall electrochemical properties compared to high-Co alloys and might be perspective materials for various electrochemical applications.     

Effects of direct current magnetic field treatment time on the properties of pork myofibrillar protein

This study investigated the effects of direct current magnetic field (DC-MF) treatment time (1, 3, 5, 8 h) on properties of porcine myofibrillar protein (MP). Gel water-holding capacity increased from 83.40% to 87.20% when DC-MF-treatment time changed from 1-h to 8-h. The 3-h treatment time of DC-MF was found to promote MP unfolding, rearrangement and aggregation, leading to the loss of total sulfhydryl, the increase of reactive sulfhydryl, surface hydrophobicity, turbidity as well as the formation of MP clusters and the greater degree of crosslinking as compared with 0-h treatment, thus a firmer and more ordered MP gel network for trapping more water. However, excessive DC-MF treatment (8-h) weakened DC-MF effect on MP aggregation as well as gel network and texture. This study has shed light on the effects of DC-MF treatment time on MP properties and provides useful information for the application of DC-MF in the food industry.