Time-domain writing architecture for multilevel RRAM cells resilient to temperature and process variations

The high potential of memristors as multilevel resistance devices is undermined by their highly non-linear behaviour and a strong dependency on different sources of variability (process, voltage, temperature…). Temperature fluctuations are specially harmful because small thermal variations may significantly modify the operation point of the device. For these reasons the circuitry required to accurately read or write multilevel devices is complex and area demanding, especially if multi-level storage is considered. This work addresses the problem of accurately writing a given resistance value in a memristive cell by using a time-domain architecture found on variable pulses. Temperature resiliency is achieved after performing an in depth analysis of the definition of the resistance levels in the presence of thermal variations. Furthermore, a calibration procedure has been conceived to make the writing circuitry resilient to device to device variations. Experimental results show that the proposed approach is valid for a wide temperature range.     

亲子乐园空调送风方式的数值模拟研究

大型综合室内亲子乐园属于高大空间,设有游乐设施和游戏的特殊性使得对空间的舒适性要求一致,但是送风气流遇阻严重,室内存在较多气流死角,影响室内空气质量和儿童健康。因此其空调设计不仅需要考虑温度、风速的空间均匀度,还要考虑各点的空气龄和PMV-PPD指标。以天津某亲子乐园为研究对象,利用scSTREAM软件对适用于该房间的辐射供冷加新风、置换通风、混合通风三种空调方式的送风效果进行数值模拟分析,从流场的均匀性、人员的热舒适性等方面对模拟结果进行探讨,研究结果表明辐射供冷加新风方式的空间均匀性和PMV指标最佳,混合通风方式的空气龄最小。     

飞机撞击下高温气冷堆乏燃料厂房损伤研究

本文针对典型高温气冷堆乏燃料厂房在双发商用飞机撞击载荷下的响应及结构完整性开展研究，并探讨结构特性对撞击损伤的影响。对乏燃料厂房及飞机分别建立有限元模型，通过弹体-目标相互作用分析模拟了飞机撞击过程，综合IAEA与NRC的评价准则对乏燃料厂房在飞机撞击下的损伤程度进行评估。数值结果表明：厂房上对应于机身及发动机的撞击位置发生可接受的局部损伤；乏燃料贮存井墙体对于提高构筑物抗飞机撞击能力有重要作用。此外，构筑物外形对损伤有很大影响，圆柱形壳体的抗飞机撞击能力显著强于方形厂房，是核电厂厂房设计的优化方向之一。     

LNG energy transfer uncertainty–sensitivity to composition and temperature changes

Determining and reducing the measurement uncertainty of LNG energy transfer in custody transfer operations is considered extremely important and challenging for industry. The European Metrology Research Programme (EMRP) for Liquefied Natural Gas (LNG) has been focused on reducing the uncertainty in the evaluation of LNG energy transfers by improving existing measurement methods, validating new measurement methods and development of new traceable calibration systems. Part of this project was to produce realistic measurement uncertainty budgets and to determine the sensitivity of the overall LNG energy transfer uncertainty to changes in the composition and temperature of different LNG cargoes.This paper provides details on the development of an uncertainty budget and the results from the sensitivity study. It was found that the uncertainty in the LNG energy transfer ranged from 0.56% to 0.77% when using the uncertainty budget for 461 LNG cargoes. The variation was mainly due to the difference in the LNG composition and its associated uncertainty.     

The effect of salinity and temperature on electromagnetic wave attenuation in brine

Ice slurries are typically formed from an aqueous solution of water and salt (NaCl) at 5% salinity. Ice pigs, used in many industry areas, are taken from a bulk ice slurry and used to clear waste or recover product from pipes. Ice fraction is a key property of an ice slurry, since it determines it's ‘thickness’ and therefore cleaning capacity. Electromagnetic wave interrogation has been shown to accurately predict an ice fraction to within an error of ±1.2%. The largest remaining process error comes from inherent salinity variation, which affects the electromagnetic wave attenuation significantly. Increasing electromagnetic wave attenuation with increasing salinity and the effect of temperature, shown to also increase attenuation, is quantified. Calibration methods are proposed, aiming to eliminate the unwanted effect of varying salinity. Analysis on multiple samples showed a 16% reduction in average error, and 9% reduction in maximum error when the calibration method was applied.     

Temperature adaptability of the soluble lead flow battery using different solutions of fluoborate,perchlorate, methanesulfonate and trifluoromethanesulfonate

The evaluation of cell's weatherability is of practical interest. To further improve the soluble lead flow battery's weatherability, physiochemical properties of electrolytes containing fluoborate, perchlorate, methanesulfonate and trifluoromethanesulfonate are investigated from ?60 to 50 °C. Activities of CF₃SO₃H and HClO₄ are poor in trifluoromethanesulfonate and perchlorate solutions due to common anion effect. The solubility of lead salt can be improved by increasing temperature, but worsened by increasing acid's content. With the temperature increasing, the conductivity is enhanced, and the viscosity is lowered for four solutions. The same results have been found by increasing acid's content except for CF₃SO₃H. The high energy efficiency can be achieved for cells over ?40–0 °C using fluoborate and perchlorate solutions, 73.2% at ?40 °C and 78.1% at ?30 °C respectively. Over the temperature range of 20–50 °C, the cells with methanesulfonate and trifluoromethanesulfonate solutions have good performance, 77.4% and 73.7% at 50 °C respectively.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Comparative studies on the electrochemical and physicochemical behaviour of three different benzimidazole motifs as corrosion inhibitor for mild steel in hydrochloric acid

This paper examines the anticorrosion characteristics of three different benzimidazole derivatives towards mild steel in 0.5?M hydrochloric acid at temperature ranges from 303 to 323?K. The benzimidazole derivatives used for the screening studies are 2-(2-methyl-1H-benzimidazol-1-yl) acethydrazide (EMBAH), 2-(2-ethyl-1H-benzimidazol-1-yl) acethydrazide (EEBAH) and 2-(2-propyl-1H-benzimidazol-1-yl) acethydrazide (EPBAH). The corrosion inhibition was investigated by weight loss, electrochemical impedance spectroscopy and potentiodynamic polarization studies. The adsorption interaction between metal and inhibitor followed Langmuir adsorption isotherm. The Gibb’s free energy values clarify the spontaneous nature of adsorption process. The temperature dependence of inhibition efficiency was explained by considering thermodynamic parameters of adsorption and kinetic parameters of corrosion. These inhibitors showed good efficiency at lower as well as moderately higher temperatures. Quantum chemical calculations were done using DFT at the B3LYP/6-31G¹ level to study the electronic properties of the molecules for correlating the inhibitive effect and molecular structure.     

Enhancing upconversion of Nd3+ through Yb3+-mediated energy cycling towards temperature sensing

Photon upconversion of lanthanides has been a powerful means to convert low-energy photons into high-energy ones. However, in contrast to the mostly investigated lanthanide ions, it has remained a challenge for the efficient upconversion of Nd³⁺ due to the deleterious concentration quenching effect. Here we report an efficient strategy to enhance the upconversion of Nd³⁺ through the Yb³⁺-mediated energy cycling in a core-shell-shell nanostructure. Both Nd³⁺ and Yb³⁺ are confined in the interlayer, and the presence of Yb³⁺ in the Nd-sublattice provides a more matched energy for the upconversion transitions occurring at the intermediate state of Nd³⁺ towards much better population at its emissive levels. Moreover, this design also minimizes the possible cross-relaxation processes at both intermediate level and the emissive levels of Nd³⁺ which are the primary factors limiting the upconversion performance for the Nd³⁺-doped materials. Such energy cycling-enhanced upconversion shows promise in temperature sensing.