水性锈转化涂料的制备及性能

采用苯丙乳液与改性苯丙乳液共混作为成膜物质,以单宁酸为转锈剂,柠檬酸为配位剂,焦性没食子酸为转锈促进剂,再加入成膜助剂、有机胺类缓蚀剂、渗透剂等,制备了一种可应用于带锈钢材的水性锈转化涂料。通过正交试验和单因素试验确定了涂料的最优配方为:成膜物质65%,转锈剂5%,转锈促进剂2%,缓蚀剂0.6%,渗透剂2%,配位剂0.5%,成膜助剂1.6%,蒸馏水余量。采用塔菲尔极化曲线测量、中性盐雾试验和盐水浸泡试验考察了漆膜的耐蚀性。结果表明,所制水性锈转化涂膜可耐盐雾96 h,耐盐水浸泡168 h,且耐酸性较强,在pH为2的3.5%NaCl溶液中有保护作用。与两款市售涂料相比,该自制水性锈转化涂料具有更好的耐蚀性。     

Review on non-isolated multi-input step-up converters for grid-independent hybrid electric vehicles

The increase in temperature, regulations of CO2 emissions, and the cost of conventional fuels forced the transportation industry to move towards the electrical energy sector. The increasing nature of electrification of transportation will increase the stress on the existing power system because of the charging of battery-based electric vehicles (EV). This paper briefly reviews the effect of electrification of transportation on the existing power system. The Lion's share of the EVs is battery-based, and these EVs extensively depend on Lithium. The Lithium is a non-renewable energy source just like fossil fuels, and reserves may last one day. The availability of Lithium reserves across the world and alternate for the grid-dependent EVs are illustrated in this paper. This paper also briefly discusses the fuel cell-based EVs, solar PV based EVs along with battery-based EVs and compare the battery with fuel cell.There is a significant need for research and development on grid-independent hybrid electric vehicles (GIHEV). From the last few years, the extensive part of the hybrid electric vehicles is making use of multi-input DC-DC converters to interface multiple sources to enhance the performance and reliability of the vehicle. Among different types of multi-input DC-DC converters, non-isolated multi-input DC-DC converters are best suited for low and medium power electric vehicle applications. This paper displays the synthesizing process of multi-input converters. Some of the existing efficient non-isolated multi-input high step-up DC-DC converter topologies are immensely discussed and compared. This review is intended to serve as a suitable guideline and reference for future work in the field of non-isolated multi-input high step-up DC-DC converter topologies for GIHEVs.     

A simple and effective design strategy to increase power conversion efficiency of linear charge pumps

This paper introduces a simple design strategy to increase the power efficiency of linear charge pumps. The technique exploits a voltage amplitude of the clock signal lower than the supply voltage to reduce the power conversion losses. The nominal output voltage is maintained unaltered by increasing the number of stages.     

A Real-Time Application of Modified Inductor Coupled KY Converter Topology in Speed Control of E-Bikes

Abstract

Congested road network and traffic jam lead to vehicle idling and fuel wastage. An E-bike which is a solution to this is often available with Thumb Throttle Mechanism and single speed operation. A motor controller with multiple output voltage levels and Click Throttle Mechanism is presented in this paper which provides variable speed operation, better power utilization and is highly economical. Proposed modified KY converter utilizes the turns ratio of an On-Line Tap Changer (OLTC) to generate multiple output voltages for variable speed commutation. This possess a stable continuous conduction mode throughout its operation and reduced switching transients when compared to the existing topologies. Mutually independent control variables namely turns ratio and duty ratio, are used here for voltage conversion, which facilitates the flexible transition between multiple output voltage levels. A 15?W prototype of the proposed modified inductor coupled KY converter is realized using Arduino Uno Board.     

超宽带大功率合成器设计北大核心CSCD

在80 MHz~1 GHz频段,单个功率管输出功率能达到100 W以上,为研制输出功率400 W的功率放大器,文中设计了四路功率合成器。该合成器需要实现功率容量大、工作频带宽、体积小的设计目标。在功率容量方面,文中采用悬置带状线结构,其功率容量远远大于微带线结构;在工作频带方面,采用切比雪夫九节阻抗变换器,将工作带宽拓宽为80 MHz~1 GHz;在体积方面,文中合成器的功率合成部分采用Y型节级联实现四路功率合成,阻抗变换部分采用切比雪夫阻抗变换器进行阻抗变换,该结构相较于磁环巴伦功率合成器,不但具有损耗小、平坦度高的优点,而且通过将阻抗变换器设计成曲折的形状,进一步缩小了合成器体积。仿真与实测结果显示该合成器在80 MHz~1 GHz范围内还具有较高的平坦度,合成效率可达90%以上。     

An active balancer with rapid bidirectional charge shuttling and adaptive equalization current control for lithium-ion battery strings

This article proposes an active balancer, which features bidirectional charge shuttling and adaptive equalization current control, to fast counterbalance the state of charge (SOC) of cells in a lithium-ion battery (LIB) string. The power circuit consists of certain bidirectional buck-boost converters to transfer energy among the different cells back and forth. Owing to the characterization of the open-circuit voltage (OCV) vs SOC in LIB being relatively smooth near the SOC middle range, the SOC-inspected balance strategy can achieve more precise and efficient equilibrium than the voltage-based control. Accordingly, a compensated OCV-based SOC estimation is put forward to take into account the discrepancy of SOC estimation. Besides, the varied-duty-cycle (VDC) and curve-fitting modulation (CFM) methods are devised herein to tackle the problems of slow equalization rate and low balance efficacy, which arise from the diminution in balancing current as the SOC difference between the cells decreases in the later duration of equalization especially. The proposed strategies have taken the battery nonlinear characteristic and circuit parameter nonideality into account and can adaptively modulate the duty cycle with the SOC difference to keep balancing current constant throughout the balancing cycle. Simulated and experimental results are given to demonstrate the feasibility and effectiveness of the same prototype constructed. Compared with the fixed duty cycle and the VDC methods, the proposed CFM has the best balancing efficiency of 81.4%, and the balance time is shortened by 27.1% and 18.6%, respectively.     

变频电源在铜冶炼除尘器中的应用分析

针对冶炼烟气的除尘效率的问题，在冶炼生产实际需求的基础上，通过对高压电源提效进行理论分析，对各种高压电源进行对比分析，结合试用的结果表明对于除尘器本体未进行改造的情况下，仅改造高压电源可以显著提升冶炼烟气的除尘效率^［1］。     

减少矩阵变换器输出电压谐波的控制策略

在传统的双电压合成原理的基础上，提出了一种减少输出电压谐波的矩阵变换器控制策略.新调制策略在一个采样周期内，通过在高输出电压时，使最大输出线电压由三输入线电压脉冲波形成，其他两相输出电压由非最大的两输入线电压脉冲波和零电压形成，同样条件下窄脉冲数量较传统的双电压合成调制策略减少；在低电压输出时，三输出线电压均由非最大的两输入线电压脉冲和零电压形成，较传统的双电压合成调制策略窄脉冲数量有大量的减少，输出电压谐波得到较大的抑制；在输入电压的最高及最低相电压间无换流，降低了开关损失；低电压输出时的零矢量为输入相电压的中间值相，负载中性点的共模电压得到了抑制.在Matlab软件仿真研究的基础上，通过dSPACE硬件实时仿真平台对该控制策略进行了实验，仿真及实验结果验证了该控制策略的正确性.     

基于金属Gd的室温旋转式磁致冷演示样机的设计

磁致冷是利用磁介质在其居里温度Tc附近具有较大磁热效应的特性实现的一种物理现象.以稀土金属Gd为磁致冷材料,对室温旋转式磁致冷演示样机进行了结构设计,演示样机可达4.4K的制冷温跨,用于设计性实验教学,具有良好的示范作用.