Effect of heat moisture treatment on resistant starch content among carbohydrate sources: a meta-analysis

Resistant starch (RS) can be generated through heat moisture treatment (HMT). The HMT was conducted by modifying starch using different ratio of moisture content, high temperature and heating time. A number of studies showed that the effects of HMT on RS contents in cereals, pulses, tubers and fruits were inconsistent. This study aimed to analyse the impact of HMT on RS level in various carbohydrate sources through a meta-analysis approach. Study selection was conducted with the PRISMA method. There were 21 relevant studies and 67 data used for meta-analysis. The database was analysed by using Hedges’ d. The results showed that there was a significant impact of HMT on RS level of cereals, especially wheat. The highest increase in RS levels for various carbohydrate sources in starch was influenced by the interaction of treatment between water content at 15 ≤ x < 25%, heating time at 0.25 < x ≤ 6 h and temperature at 120 ≤ x ≤ 130 °C.     

Plasma assists titanium nitride and surface modified titanium nitride nanoparticles from titanium scraps for magnetic properties and supercapacitor applications

Plasma methods are efficient processing for metal recovery from metal scrap, bearing minerals, electronic waste, etc. In this work, pure titanium nitride nanoparticles (TiN NPs) were synthesized from titanium scraps by the thermal plasma arc discharge (TPAD) method. TPAD synthesized TiN NPs have a highly crystalline nature with cubic and spherical morphologies with average particle sizes of 30–100 nm. Further, prepared TiN NPs involving surface modification (SM) or etching processes were investigated by using the non-thermal DC glow discharge plasma technique with air atmosphere at different processing times. SM@TiN NPs have a comparatively low crystalline, which was confirmed from the powder X-ray diffraction technique. SM@TiN NPs have very interesting core shell morphologies, which are due to the surface interactions of ionized air molecules. TiN and SM@TiN NPs have room-temperature ferromagnetic properties with high saturation magnetization (Ms) up to 2.6 and 3.0 emu/g and very high coercivity (Hc) of 235.5 Oe, respectively. TiN and SM@TiN NPs have superior energy storage performance with an outstanding specific capacitance of 192.8 and 435.1 F/g at a current density of 2 A/g with pseudocapacitive behavior. These results reveal that TiN and SM@TiN NPs have highly promising electrodes for supercapacitor applications.     

竹材液化墙体泡沫材料的阻燃改性

为提高竹材液化产物所制备的高轻发泡墙体材料的防火性能，分别采用材料内部添加和表面浸泡的方法进行阻燃改性，并评价不同阻燃剂及其添加量对发泡材料阻燃性能的影响。实验结果表明：在材料内部或表面添加选择的阻燃剂不会对材料自身形貌或组分产生明显影响，对材料的力学性能亦不会造成破坏，在材料内部添加3 g膨胀型凝胶-二氧化硅/聚磷酸铵核壳阻燃剂（MCAPP）后压缩强度达到了0.37 MPa，在材料表面浸泡聚硅氧烷后压缩强度达到了0.58 MPa，同时能提高材料的阻燃性能，在材料内部添加聚磷酸铵（M-APP）后极限氧指数提高到33.2%，比改性前提高3%。在材料表面浸泡膨胀型壳聚糖-蒙脱土-聚磷酸铵（CMAp）后点燃时间明显延长，极限氧指数最高达到了31.5%。     

淀粉/聚乙烯醇活性包装薄膜及其在食品包装应用中的研究进展

综述了淀粉/聚乙烯醇（PVA）活性包装薄膜及其在食品包装中的研究进展，主要对从不同比例共混、疏水改性、增强改性等方面对淀粉/PVA薄膜的改性研究，从功能特性和活性物质对薄膜性能的影响2个方面对淀粉/PVA活性薄膜研究和薄膜在食品包装中的应用3个方面进行了归纳总结，旨在为以淀粉/PVA为基材的活性包装薄膜研究提供参考。     

Adsorption isotherm and kinetic modeling of a novel procedure for physical modification of silica gel using aqueous solutions of 4,4′-(1,2-ethanediyldinitrilo)bis-(2-pentanone) for preconcentration of Ni(II) ion

ABSTRACT

Aqueous solutions of 4,4′-(1,2-ethanediyldinitrilo)bis-(2-pentanone) (EDDBP) have been used in a novel green procedure for the physical modification of silica gel (SG) for solid-phase extraction and preconcentration of Ni(II) ion. Optimization experiments were carried out at 301 ± 1 K by batch technique. The EDDBP-modified SG was characterized using X-ray Diffraction Spectroscopy (XRD) and Brunaeur-Emmett-Teller (BET) determinations. The adsorption isotherm and kinetic models indicated a physisorption process. The modified SG showed moderate to high adsorption capacity values for Ni(II) ion (~98% removal efficiency) at pH 8. A sorption mechanism for Ni(II) chelation with EDDBP-modified-SG was proposed. These results suggest the procedure has advantages.     

介孔分子硅剂改善茶浓缩膜结构特性应用研究

为有效提高功能性茶浓缩反渗透膜的回收效率和抗污性能,探究了3种介孔分子硅材料(MCM-41、SBA-15和MCFs)对浓缩膜面聚酰胺层聚合形成过程的结构影响。结果表明,添加质量分数0.02%经磺化预处理的MCM-41于间苯二胺水相可接枝酰氯基团,形成的聚酰胺结构层峰谷粗糙跨度仅为220 nm且交联紧致,膜抗拉伸强度增加37.8%;SBA-15和MCFs相膜面峰谷跨度达500~780 nm,横向褶皱和团聚,结构存在孔道塌陷;改性膜在3 h内对茶多酚、茶多糖、茶蛋白即可达到最大浓缩度,减少50%浓缩时间;MCM-41和SBA-15膜长时间运行的浓缩降率仅为2.8%~6.1%,48 h下降率比显示改性膜达标使用时长增加112.5%~137.5%,亲水性和抗污堵能力均大幅提升,可有效满足功能化茶浓缩精度。     

用于水质净化的氧化石墨烯膜研究进展

氧化石墨烯膜具有超高的水通量、可控的层间距以及卓越的分离性能，这些优异的特性使氧化石墨烯膜有望成为新一代膜材料并用于水环境中物质的精确分离。对氧化石墨烯膜的研究已经取得了许多重要的成果，本文系统地阐述了用于水质净化的氧化石墨烯膜的结构特性和构效关系，总结了氧化石墨烯膜典型的制备方法，重点介绍了氧化石墨烯膜的改性方式，概述了氧化石墨烯膜在多种水环境中的应用，总结并展望了氧化石墨烯膜的发展方向，为设计和合成高性能氧化石墨烯膜用于水质净化提供新的思路。