水泥窑预加水成球微机控制系统

一、引言预加水成球是水泥工业近年来推广应用的新技术。该技术是将水泥混合生料粉与水预先在搅拌机内混合,再传送到成球盘内滚动成球,这项技术,在工业环境多变和存在无法预测的干扰条件下由人工直接操作很难驾驭。因此,应庆安县水泥厂要求,我们研     

高温预析出对Al-Zn-Mg系铝合金时效硬化和应力腐蚀的影响

研究了高温固溶后降温处理工艺对中强可使预析出LC52和7039铝合金的组织、时效硬化和应力腐蚀的影响。金相观察发现,高温预析出可优先在晶界处产生,并提高随后时效状态下晶界析出相的不连续分布程度,温度降低到一定程度晶内和晶界产生大量析出。合金拉伸性能和应力腐蚀结果表明,预析出在保持强度和塑性的同时,可提高抗应力腐蚀性能。而预析出温度降低,合金强度呈下降趋势。     

金属拉伸过程中的拉伸应力及影响因素

电线电缆、线圈绕组线及灯泡的钨丝等都是经过金属拉伸制成的。许多触点导电材料，如开关上的银镍合金触点、电路板上的微细铝硅丝接点线(直径0．01毫米以下)也是金属拉伸制品。研究金属拉伸过程中的拉伸应力及影响因素，是保证拉伸过程顺利进行及成品质量的关键。     

ZL110合金活塞两级时效工艺

本文提出了用两级时效工艺提高ZL110合金时效强化效果的方法,并探讨了该方法对ZL110合金活塞的机械性能及尺寸稳定性的影响规律。     

Corrosion Inhibition Mechanism with Spilt Cell Technique of Rare Earth Metal on LC4 Al Alloy

A new method of studying the corrosion inhibition mechanism of rare earth metal(REM) on LC4 Al alloy with the spilt cell technique was studied. The principle and experimental method of the spilt cell technique were analyzed. By measuring the change of net-electric current between the two electrodes caused by the change of the amount of oxygen in the solution and the addition of CeCl₃, the influence of corrosive performance of CeCl₃ on LC4 super-power aluminum alloy in the 0.1 mol·L⁻¹ NaCl solution was investigated. Meanwhile, the conditional changes of pH values, CeCl₃ solution, additire and time of performance were also studied. Finally, the features of electrode surface were revealed by using SEM and X-ray energy-dispersive spectrometry (EDS). By combining these with other electric chemical techniques, such as potential-time curve, polarization curve et al.     

川崎制铁开发出断面为四角形的线材

据日刊《铁钢界》报道川崎制铁采用热轧制造技术。此产品已由川崎制铁所属水岛制造厂的线棒材车间生产。通过热轧工艺可生产出高精度尺寸、形状为四角形的线材。线材的四角可以是直角，也可以是其他任意形状。此工艺的开发成功，可以减少冷伸缩和热处理的次数，甚至可根据产品的用途省略拉伸及热处理工艺，大幅度降低了生产成本。