液位定量式灌装机的灌装精度概率模型与可靠度计算模型

描述了控制液位定量式灌装机的灌装时间与灌装精度的关系，推导出实际灌装时间的理论计算公式。针对实际存在的各种随机变量对灌装时间的影响，建立了灌装时间的概率模型，提出基于灌装时间随机误差的灌状精度以及灌装精度可靠度概念，并相应建立出灌装精度概率模型与灌装精度可靠度计算模型。     

复合轴控制系统应用研究

复合轴控制是提高光电跟踪系统精度和控制带宽的一种有效手段，尤其在光束定向器系统中，不仅要求系统要稳定地跟踪上动态目标，而且必须将光束涣定在目标的某一点上，这对控制系统的要求是非常高的，必须采用双或三复合轴控制方式。     

影响磁式TIMS测量准确度的主要因素

测量准确度是热电离质谱 ( TIMS)的重要指标 ,对于使用年限较长的 TIMS,造成准确度下降的因素很多 ,分析判断更复杂。为了准确、系统地了解其中的主要原因 ,本文从 TIMS的基本工作原理出发 ,对影响测量准确度的主要因素 ,如离子束的角分散、能量分散、电磁场稳定性、多接收器的形变和位移、电子倍增器的衰老和放大器增益的差异等及相应的解决办法作了较深入的探讨     

Experience with Siberian Centralized Dispatch Regulation regarding location determination of damages sustained by intersystem high-voltage transmission lines

A set of measures that can be implemented by the Relay-Protection and Automated-Equipment Service for Centralized Dispatch Regulation (CDR) in Siberia to determine the location of damage sustained by inter-system 550-and 220-kV transmission lines maintained by the United Power System (UPS) of Siberia, and the methodology and technology of damage-location determination (DLD) are described. The damage sustained by the 500-kV high-voltage lines (HL), and the accuracy of DLD relative to zero-sequence emergency parameters are analyzed statically. __________ Translated from élektricheskie Stantsii, No. 5, pp. 59–62, May, 2006.     

一种基于DBF的双基地雷达系统的性能分析与实验研究

讨论了一种基于数字波束形成的脉冲追赶式双基地雷达系统的构成和基本工作原理．对该双基地雷达的性能进行了理论分析，并通过实验结果进行了验证。     

主轴回转精度测试中的多圈数据采集及处理

本文就主轴回转精度测试中的多圈数据采集和处理方法作了探讨。根据提出的方法和改进后的测试系统编制了实用程序,进行了实测,获得了测试结果。     

高精度节能型电力稳压器

分析了现有交流稳压器的特点和不足,提出了新一代数控稳压器的理论和实际无均差系统的方法,给出了超高精度无均差稳压系统的实现方法.经全乐科技公司模拟试验,获得了很好的结果.市电220.4 V和220.5 V,试验样机采用3 V、9 V和27 V这3个变压器,已达到优于±1%的精度,符合大部分负载的实际需要,经用户单位试用半年,效果非常满意.     

Speed–accuracy tradeoff in Fitts’ law tasks—on the equivalency of actual and nominal pointing precision

Pointing tasks in human–computer interaction obey certain speed–accuracy tradeoff rules. In general, the more accurate the task to be accomplished, the longer it takes and vice versa. Fitts’ law models the speed–accuracy tradeoff effect in pointing as imposed by the task parameters, through Fitts’ index of difficulty (I_d) based on the ratio of the nominal movement distance and the size of the target. Operating with different speed or accuracy biases, performers may utilize more or less area than the target specifies, introducing another subjective layer of speed–accuracy tradeoff relative to the task specification. A conventional approach to overcome the impact of the subjective layer of speed–accuracy tradeoff is to use the a posteriori “effective” pointing precision W_e in lieu of the nominal target width W. Such an approach has lacked a theoretical or empirical foundation. This study investigates the nature and the relationship of the two layers of speed–accuracy tradeoff by systematically controlling both I_d and the index of target utilization I_u in a set of four experiments. Their results show that the impacts of the two layers of speed–accuracy tradeoff are not fundamentally equivalent. The use of W_e could indeed compensate for the difference in target utilization, but not completely. More logical Fitts’ law parameter estimates can be obtained by the W_e adjustment, although its use also lowers the correlation between pointing time and the index of difficulty. The study also shows the complex interaction effect between I_d and I_u, suggesting that a simple and complete model accommodating both layers of speed–accuracy tradeoff may not exist.     

高速摄影法研究铅芯延期体的燃烧特性

用高速摄影仪对卡在透明塑料管中的铅芯延期体从点火到喷火的过程进行了拍摄.图像显示,在铅芯延期体点火端有一段延期药与点火药头一起在很短的时间内完成燃烧过程;在铅芯延期体喷火端有一段延期药被喷出,铅芯延期体未起延期作用.将燃烧后的铅芯延期体沿药芯切开,显微镜下观察残渣,发现有的残渣呈层状龟裂.根据结果,对这些影响铅芯延期精度的因素进行了分析.     

Provision of accuracy for quantitative determination of small amounts of components: Principles of resolving the problem and their realization

Versions are suggested for resolving the problem of monitoring the accuracy of determining small amounts of components in samples of substances and materials. __________ Translated from Izmeritel'naya Tekhnika, No. 1, pp. 52–57, January, 2006.