伊犁盆地伊宁凹陷构造变形特征与主控因素分析

基于伊犁盆地伊宁凹陷钻/测井、露头、地震剖面等资料,运用平衡剖面恢复技术,在对伊宁凹陷主干剖面构造演化恢复的基础上,开展构造特征研究工作。研究表明:伊宁凹陷具有"北断南超、南北分带"的构造格局和"北强南弱"的构造变形特点;自二叠纪完全进入陆内发展阶段以来,该区经历了二叠纪末、三叠纪末侏罗纪初、侏罗纪末以及新近纪末4个主要挤压形变期,其中二叠纪末期盆地在东西方向上的挤压变形较为强烈,之后减弱并逐渐发展为以南北向挤压为主,新近纪末为伊宁凹陷南北向主体结构的主要定型期;在南北向为主的挤压应力背景下,伊宁凹陷及周边对冲、逆冲构造发育,形成了以挤压构造为主的构造样式。     

Depressing effect of flocculants on molybdenite flotation

The quality of recycled process water is an important issue in the flotation of Cu–Mo ores. Processing of Cu–Mo ores includes two steps: a bulk flotation where molybdenite is recovered together with Cu sulfides, and a subsequent selective flotation step where molybdenite is separated from depressed copper sulfides. Flocculants are usually employed in the middling thickeners in the copper plant, and in the Cu–Mo bulk concentrate ahead of the molybdenite plant. However, the floatability of molybdenite, similarly to other naturally hydrophobic minerals, is highly sensitive to the presence of both natural and synthetic polymers. In this work flotation tests demonstrate that conventional flocculants, high-molecular weight anionic polyacrylamides (PAM), are strong molybdenite depressants. Low-molecular weight shear degraded polyacrylamides in spite of losing flocculation efficiency maintain depressing ability for molybdenite. Also a non-ionic flocculant, polyethylene oxide (PEO), has been studied in this project. Our results indicate that PEO is an efficient flocculant for molybdenite suspensions in a wide pH range. However, similarly to polyacrylamides, the PEO flocculant also depresses molybdenite flotation.     

哌嗪基单丁酰胺酸钙/锌的合成及对PVC热稳定性研究

以丁二酸酐、哌嗪、氯化钙、氯化锌为原料，通过两步反应制备了哌嗪基单丁酰胺酸钙/锌（PSACa/Zn）热稳定剂。采用元素分析、电感耦合等离子体原子发射光谱仪（ICP?OES）和傅里叶变换红外光谱仪（FTIR）对产品结构进行表征，通过刚果红试纸法、转矩流变仪法、热失重法考察了PSACa/Zn对PVC的热稳定性能，并筛选了PSACa和PSAZn的最佳配比。结果表明，PSACa和PSAZn对PVC的静态热稳定时间分别可达74.5、41.5 min，优于硬脂酸钙（CaSt₂）、硬脂酸锌（ZnSt₂）热稳定剂；PSACa和PSAZn复配使用时，以m_PSACa∶m_PSAZn=1∶1时性能最佳，对PVC静态热稳定时间可达92 min，动态热稳定时间可达905 s；发现PSACa/Zn对PVC的长期热稳定性良好。     

Identification of low-carbon travel block based on GIS hotspot analysis using spatial distribution learning algorithm

Neural Computing and Applications - In the future, big data will become an efficient and useful means for improving urban planning, and machine learning can take city as a simplified and efficient...     

The effects of PVP surfactant in the direct and indirect hydrothermal synthesis processes of ceria nanostructures

CeO₂ nanostructures with completely different morphologies were successfully prepared using the same cerium source and mineralizer through the direct and indirect hydrothermal methods with different introducing strategies of PVP surfactant. The CeO₂ nanostructures tend to form the morphologies of nano-flowers and nano-cubes through the indirect and direct hydrothermal methods, respectively. X-ray diffraction (XRD) analyses revealed that both as-prepared nanostructures are composed of CeO₂ with a standard fluorite structure. The different synthesis mechanisms and corresponding chemical evolutions of the as-prepared CeO₂ nanostructures are discussed based on the different introducing strategies of PVP surfactant in the direct and indirect hydrothermal processes. Investigation of the UV-shielding ability of both CeO₂ nanostructures suggested that the UV absorbance of the nano-flowers is much higher than that of the nano-cubes.     

Effect of NaCl on the properties of Eu-doped Ca-α-SiAlON phosphors prepared by combustion synthesis

Eu-doped Ca-α-SiAlON phosphors, featuring high phase purity, uniform particle size of 3–5 μm and good luminescent properties with a yellow emission spectrum under blue light excitation, were prepared by a highly efficient combustion synthesis (CS) method. A certain amount of NaCl was applied as an innovative additive to regulate and control the properties of synthesized phosphors. Further, the effects of NaCl additive in the CS system were systematically investigated and rational proposed. It was found that the effect on accelerating nitridation and crystallization played a dominant role in the reaction as the content of NaCl was less than 6 wt%, while the effect of absorbing reaction heat through vaporization was dominant with the further-increased content of NaCl. The intensity of the emission spectrum for the sample doped with 6 wt% of NaCl was remarkably enhanced, nearly 40% more than the sample which was not NaCl-doped. Moreover, a continuous blue-shift phenomenon in emission spectra was observed with the increased content of NaCl.     

对城市道路平面交叉设计的探讨

从交通组织设计的角度出发，广泛参照国内外先进的理论与方法，结合平时工作积累的经验，从交叉口危险点、通行能力、渠化设计的角度进行分析探讨，并提出了一些思路，以供参考。     

基础回填为细钢渣引起的质量问题分析及处理

对某地基础回填用废钢渣使墙体开裂等问题进行了分析,从废渣产生不均匀膨胀力方面进行了论述,提出了利用厚聚苯板的方法,对现场进行了勘察,达到了消除不均匀膨胀力的效果,解决了墙体开裂等问题。     

气浮-厌氧-接触氧化工艺处理油田联合站剩余污水

介绍了该工艺的运行原理以及工艺特点,并介绍了该工艺在冀东油田柳一联的运行情况,以及运行经验。     

基于WE!NVIEW MT6070H的PLC压砖机控制系统的设计与实现

以传统耐火材料压砖机为研究对象,采用WE!NVIEW的MT6070H触摸屏作为上位机、三菱FX0N系列PLC作为下位机的控制方案,利用气动控制实现了对压砖机的自动控制。现场应用证明:该系统出砖的效率和控制精度提高,所需人员少,控制简单,可维护性强。