温度对化学镀锡层形貌和耐蚀性的影响

对不同温度下制备的化学镀锡层进行了电化学腐蚀试验。使用电化学工作站测试了交流阻抗谱,研究了温度对化学镀锡层形貌和耐蚀性的影响。结果表明:Nyquist图显示不同温度下所得化学镀锡层的电化学阻抗谱都呈现出简单的容抗弧特征,随着温度从40℃升高到80℃,容抗弧半径总体上先增大后减小;Bode图显示不同温度下所得化学镀锡层的相位角与频率之间的关系曲线形状相似,在测试频率范围内都只出现一个相角峰。温度为60℃时制备的化学镀锡层表面块状颗粒的尺寸和分布最均匀,容抗弧半径最大,并且在较宽频率范围内的相位角都接近70°,表现出较好的耐蚀性。     

汽车涂装废水处理技术的研究进展

汽车涂装中产生大量的工业废水，主要包括脱脂废水、磷化废水、电泳废水和喷漆废水等,其典型污染物为重金属离子、表面活性剂、油漆颗粒、磷酸盐等，是一类复杂及难处理的高浓度工业废水。依据废水中所含污染物的不同，对涂装各工序废水进行分质预处理可有效地去除磷酸盐、重金属离子、悬浮固体、油类物质等污染物，有利于减轻后续生物或高级处理单元的负荷，提高整个处理系统的效率。本文综述近年来汽车涂装废水处理方面的研究成果或实践，旨在总结预处理工艺及主体处理工艺的优点及存在的不足，希望为汽车涂装废水处理达标排放及循环回用提供一些借鉴。     

Effect of PCL concentration on PCL/CaSiO3 porous composite scaffolds for bone engineering

Porous polycaprolactone (PCL)-coated calcium silicate (CaSiO₃) composite scaffolds were successfully prepared by 3D gel-printing (3DGP) and vacuum impregnation technology in this study. The effect of different PCL concentration on porous CaSiO₃ scaffolds prepared by 3DGP technology was studied. The composition and morphological characteristics of PCL/CaSiO₃ scaffolds were tested by using fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and energy dispersive spectrometer (EDS) analysis. PCL coating amount on the scaffolds surface was calculated by thermogravimetric analysis (TGA). Compressive strength was tested by a universal testing machine, and degradability was tested by immersing the scaffolds in a simulated body fluid (SBF). The results show that PCL coating thickness increased from 7.29 μm to 12.2 μm, and the compressive strength of the corresponding composite scaffolds increased from 17.15 MPa to 24.12 MPa following with PCL concentration increasing from 7.5% to 12.5%. When the porous composite scaffolds were immersed in SBF for 28 days, the degradation ratio was 1.06% (CaSiO₃), 1.63% (CaSiO₃-7.5PCL), 1.81% (CaSiO₃-10PCL) and 1.55% (CaSiO₃-12.5PCL), respectively. It is obviously that PCL/CaSiO₃ composite scaffolds, which are suitable for bone growth in bone repair engineering, are beneficial to improve the mechanical properties and biodegradability of pure CaSiO₃ scaffolds.     

埋地管道腐蚀防护--防腐层与阴极保护存在的问题分析

在埋地管道研究工作中,关于其腐蚀的防护一直是研究的焦点问题,但现阶段常用的防护手段多为防腐层与阴极防护。为此,在文中主要对二者的保护措施展开了相应地阐述,并重点分析了2种保护手段存在的问题,旨在为后续的管道防腐研究提供相应的参考。     

Microstructure and interface-adhesion of thermally sprayed continuous gradient elastic modulus FeCrAl-ceramic coatings

The bond strength between thermally sprayed metal bond-coats and ceramic top-coats is a key factor in determining their service life. However, most studies focus on interface modifications. In this research, based on FeCrAl bond-coats prepared by arc spraying, top-coats (Al₂O₃-40 wt% TiO₂) were prepared by plasma spraying, and heat treatment was carried out in a hypoxic atmosphere. Continuous gradient elastic modulus FeCrAl-ceramic coatings were successfully prepared, and the microstructural and mechanical properties from the substrate to the top-coats were systematically investigated. The Al₂O₃ content gradually decreased from the top-coats to the substrate, forming continuous gradient elastic modulus FeCrAl-ceramic coatings. The oxide formed during the heat treatment filled the defects in the bond-coats and greatly improved the mechanical properties of the coating. The bonding strength of the continuous gradient elastic modulus coating was 21.7% greater than that of the as-received coating.     

Preparation of Al2O3 coating on TiN coating by polymer-assisted deposition to improve oxidation resistance in coking inhibition applications

In order to inhibit the metal catalytic coking and improve oxidation resistance of single TiN coating, the TiN/Al₂O₃ double layer coatings were designed as a chemically inert coating for methylcyclohexane supercritical pyrolysis. Internal TiN coatings were prepared by atmospheric pressure chemical vapor deposition using TiCl₄–H₂–N₂ system. The external Al₂O₃ coatings with different thicknesses were prepared on the TiN surface by polymer-assisted deposition, and the coating with the most suitable thickness was further annealed at different temperatures of 600, 700, 800 and 900 °C. The morphology, elemental and phase composition of TiN/Al₂O₃ coatings were characterized by SEM, EDX and XRD respectively. The chemical state information of the coating elements was based on Ti 2p, Al 2p core level X-ray photoelectron spectroscopy (XPS) spectra. The results indicated that the external Al₂O₃ coating will partially peel off at 900 °C annealing temperature. The thermogravimetric analysis results indicated that all TiN/Al₂O₃ coatings show better oxidation resistance than single-layer TiN coating. The anti-coking test with methylcyclohexane supercritical pyrolysis showed that the TiN/Al₂O₃ coatings can effectively cover the metal catalytic sites and eliminate metal catalytic coking. However, the acid sites of external Al₂O₃ coating slightly promoted coking, so the anti-coking ratios of TiN/Al₂O₃ coatings were smaller than that of TiN. Thus, the addition of external Al₂O₃ coating can greatly improve the oxidation resistance of TiN coatings with little loss of coking resistance.     

超双疏含氟聚合物的研究进展

超双疏功能性材料在当代化工材料中有着重要的地位，其独特的界面性能使得其在各个领域的应用中大显身手。本文介绍了近年来国内外对含氟聚合物在超双疏领域的研究近况，包括超双疏含氟聚合物的结构特点和合成方法等。含氟聚合物的表面拥有超低的表面能和独特的空间排列方式，通过对比不同结构的含氟聚合物分子与其性能的关系以及对各类含氟聚合物合成方法的调研，发现含氟聚合物作为超双疏涂层材料的使用十分广泛，其结构中含氟单体主要为氟取代丙烯酸酯类，合成方法多为乳液聚合。超疏水含氟聚合物与纳米颗粒材料的结合是当今研究的热点，文中列举了大量研究实例，希望其中的研究方法和合成路线等能对今后该领域的研究起到一定的借鉴作用。     

Microstructural evaluation and thermal oxidation behaviors of YSZ/NiCoCrAlYTa coatings deposited by different thermal techniques

In this paper, two coating techniques, the high velocity oxy-fuel (HVOF) and air plasma spray (APS) techniques, were used to deposit a bond coat of NiCoCrAlYTa on the Inconel 625 substrate, followed by applying a topcoat of yttria-stabilized zirconia (YSZ). The samples were preoxidized in an argon-controlled furnace at a temperature of 1000 °C for 12 and 24 h to characterize the microstructure of a thermally grown oxide (TGO) using the two coating techniques. The most suitable preoxidized samples were further tested for isothermal oxidation at 1000 °C for up to 120 h, and a hot corrosion test was performed at 1000 °C for up to 52 h or until spalling occurred. As-sprayed and oxidized samples prepared with different coating techniques were evaluated in terms of their microstructure using different characterization methods, such as field emission scanning electron microscopy (FESEM), variable pressure scanning electron microscopy (VPSEM), energy dispersive X-ray spectroscopy (EDS) equipped with energy dispersive X-ray and X-ray diffraction (XRD) analyses. In addition, the mechanical properties of these samples were evaluated using adhesion tests. The results show that the YSZ/NiCoCrAlYTa coating applied with the HVOF technique forms a more thin and continuous layer of TGO than that obtained when applying a YSZ/NiCoCrAlYTa coating using the APS technique, indicating that a severe brittle oxidation interface exists between the two layers. The results also indicate that the mechanical strength obtained from the adhesion test of the coated samples is observably affected by the oxidation behaviors obtained with the different deposition techniques chosen.     

Preparation and corrosion resistance of nonstoichiometric lanthanum zirconate coatings

Lanthanum zirconate is a promising thermal barrier coating material owing to its excellent thermophysical properties and La plays the key role in its corrosion resistance. Here, an amorphous precursor is used as raw feedstock material so as to synthesize lanthanum zirconate coatings with tailorable composition by atmospheric plasma spray (APS). Three lanthanum zirconate coatings of La_1.7Zr_2.3O_7.15, La_2.0Zr_2.0O_7.0 and La_2.3Zr_1.7O_6.85 are fabricated. Furthermore, the corrosion resistance of the as-sprayed coatings against CaO-MgO-Al₂O₃-SiO₂ at 1250℃ is investigated. The increased La content promotes the formation of a sealing layer of the crystalline Ca₂La₈(SiO₄)₆O₂ apatite, which slows down the penetration of molten CaO-MgO-Al₂O₃-SiO₂. Therefore, the infiltration rate of the La_2.3Zr_1.7O_6.85 coating decreased up to 42.6 % compared with the other two coatings. This work develops a feasible preparation strategy to control the La composition for the improved corrosion resistance, which is expected to guide the future coating design and synthesis for the materials with big composition changes during the APS process.     

Two/three-dimensional reduced graphene oxide coating for porous flow distributor in polymer electrolyte membrane fuel cell

There are drawbacks to use stainless-steel plates as a flow distributor plate in fuel cell, due to some of their properties being inferior to graphite flow distributor plates in terms of electrical conductivity and corrosion resistance. To overcome these problems, many researches have been conducted to improve the properties of stainless-steel flow distributor plates through coating of carbon materials. Herein, two-dimensional Web-like graphene (WG) and self-assembled three-dimensional graphene (STG) are coated through superheat vaporization of micro-droplet method. WG is coated in porous Ni–Cr foam and STG is constructed on the flat flow distributor plate, and they exhibit the feasibility to be applied in flow distributors. Compared to uncoated Ni–Cr foam, the performance of the PEMFC system with the graphene coated foam is enhanced remarkably. Furthermore, the flow distributor plate with the STG exhibits potential to be used directly to flow distributor.