煤与高岭石表面性质对凝聚过程的影响机制

煤泥水中含大量高岭石等黏土矿物，为其絮凝沉降带来较大的困难。为明确矿物性质对凝聚过程的影响机制，在应用扩展的DLVO理论计算煤和高岭石颗粒间作用力的基础上，采用聚焦光束反射测量仪监测了CaCl2用量为4.50 mmol/L时20 g/L的煤和高岭石的悬浮液在60, 100和150 r/min的搅拌转速下的凝聚过程。结果表明，颗粒间的静电作用力在颗粒表面间距2?200 nm范围内起主导作用，高岭石的电负性较大，在凝聚过程中更难发生靠近和碰撞；较高的转速可为颗粒提供较大的动量，有利于提高碰撞频率，缩短完成凝聚所需时间，实验条件下，煤和高岭石的凝聚时间分别由74和123 s缩短至47和89 s。疏水性作用力在颗粒表面间距小于2 nm的范围内起主导作用，决定了颗粒的黏附效率；煤因强疏水性，在碰撞后更易黏附，且能抵抗更高的流体剪切作用，可由19.32 μm凝聚形成100 μm的大凝聚体，而高岭石则因其亲水性难以得到较大粒度的凝聚体，均小于30 μm。     

A system for time-fluctuating flow rate measurements in a single-blade pump circuit

Commonly used flow rate measurement systems provide an accurate and stable output value of the quasi-stationary flow rate. In some pump types as e.g. single-blade pumps significant flow rate fluctuations may occur even in steady operation points due to rotor-stator interaction. For the analysis of the time-resolved flow rate a new measurement and evaluation method is presented based on an electromagnetic flow meter. Internal averaging of the flow meter is deactivated and the raw signal is evaluated directly with a sampling rate of 3 kHz. With ensemble-averaging in combination with an impeller position detection, interfering signals acting on the time-resolved measurement signal are filtered out. Accompanying numerical simulations of the pump flow circuit are carried out with a 1D method of characteristics and validated against well-established time-resolved pressure measurements of the pump flow. Experiment and simulation show a resembling trend of pressure as well as flow rate fluctuations over the entire operation range of the pump. Thus, by the combined utilisation of measurement and simulation technique, we assure the validity of the ensemble-averaged flow rate fluctuation results. We find that the flow rate fluctuations show a consistent phase shift to the pressure fluctuations that increases towards overload. The flow rate amplitude is an order of magnitude smaller than the amplitude of the pressure fluctuations.     

Application of the sampling moiré method to shallow open-channel flows with circular roughness elements

This research presents an application of the sampling moiré method, a novel technique originally developed for measuring slight deformation of a static object such as a plate, to fluctuating free water surface in rough open channel flows. The method was used to capture the two-dimensional water surface deformation at a high sampling rate by dyeing the color of water white. The target flow was a very shallow subcritical flow with a depth of 1.5 times the height of the roughness. As a result, a series of instantaneous water surface profiles with non-uniform rough planes were successfully measured at a sampling rate of 100 Hz.It has become clear that the effect of dispersive gravity waves traveling on the water surface is greater than that of non-dispersive waves driven by the turbulence, and that this feature becomes more pronounced as the Froude number increases in such shallow flow conditions. Furthermore, it was experimentally and theoretically verified that the intensity of water surface fluctuation increases with the square of the Froude number. The decomposition of surface fluctuations due to gravity waves and subsurface turbulence using the wavenumber frequency spectrum revealed that the effects of subsurface turbulence are about 20%. This is much less than the contribution from gravity waves in very shallow flows as in this experiment.     

螺纹量规的数字化检测方法

螺纹量规是判定螺纹紧固件合格与否的重要量具,其几何参数的精确测量具有重要意义。利用螺纹综合测量仪完成了螺纹量规的数字化测量试验,分析得出该方法的测量结果准确,精度可靠。同时对螺纹综合测量仪测量中径的不确定度进行了评定,为螺纹量规的测量质量提供了参考依据。     

数字化核电厂班组SSA测度方法与实验研究

情景意识(SA)问题在数字化核电厂中更为突出。为识别班组共享情景意识（SSA）水平及行为形成因子（PSF）对班组SSA的影响，基于情景意识全面评估技术（SAGAT）建立一种班组SSA测量和计算方法并进行模拟机实验。结果表明，个体SA（ISA）水平与SSA水平有关，ISA级别越高，SSA级别越高；ISA和班组SSA都受到PSF的影响，PSF的状态水平越高，ISA和SSA的水平越高；对于不同的实验场景，操纵员的ISA水平和班组SSA水平不同，这表明风险场景的症状越明显及知识经验水平越好，ISA和SSA水平就越高。最后，通过被试的自评价识别当前PSF的状态水平，主要不良的PSF是班组沟通和合作水平、压力水平、人-机界面等。这些评估结果为提高数字化核电厂人因可靠性和安全水平提供了理论支持。     

面向长距离量子通信的双光子关联成像技术

量子时域鬼成像利用光子对的时间-频率关联性实现了50km光纤链路上的图像传送,有望应用于量子通信的协议中。然而,现有方案的成像质量较差,成像速度较慢,因此其应用性在一定程度上受到了限制。文章对已有成像方案进行了较大的改进,利用可编程滤波器数字设定待成像信息,进而实现了二维图像信息的自动化实时传送。实验结果证明,改进方案的成像质量和速度均有显著改善,有利于推动量子关联成像在量子通信领域的应用。     

基于CORS系统下GPS测量技术在地质测绘中的应用

GPS测量技术在测绘领域中的应用价值相当突出,有着不可替代的作用和地位。同时,基于CORS系统下GPS测量技术因为具备精准定位、高效率定位等特点,在行业当中被许多人士认可。对此,为了更好的提高GPS测量技术的应用价值,详细分析基于CORS系统下GPS测量技术,希望可以今后相关工作者提供理论性帮助。     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

应用独立分量分析的激光测风雷达湍流频谱分解

针对大型风力发电机机组中常见的脉动湍流、风机尾流与涡流等湍流信号,研究了利用自然梯度下降的独立分量分析方法的湍流频谱分离效果,以区分中心风速与湍流信号,提高风机机组的综合工作效率。首先分析了风机组中常见湍流信号的后向散射与频谱分布特点,然后依据这些特点设计了对应的独立分量分析模型。在仿真结果符合要求的基础上,进行了双目激光雷达天线的风速采集与实际分离效果检测。实验结果表明,在大气折射率结构常数C2n≤10-14同时广义大气常数α≥4的通常情况下,利用双目信号能够分离出一个湍流中心和一个中心风速。对1 s内两个谱峰的波动范围进行统计,获得(2.59±0.05)MHz的中心风速以及(1.22±0.19)MHz的湍流中心估计,且二者的平均信噪比分别为25.93 dB和31.01 dB,能够在获得稳定的中心风速估计的同时得到一个较为稳定的湍流中心估计。     

Design and fabrication of thermoelectric waste heat reutilization system—possible industrial application

The current article discussed the detail design and development of an experimental test rig to derive usable energy by utilizing the waste heat energy through a heat exchanger made of Bi₂Te₃ material. The accuracy including the efficiency of the fabricated device is demonstrated further by verifying the associated parameter through a simulation model (commercial finite element package, ANSYS 15.0). To imitate the waste hot air from the industry is achieved via a heat gun and fed to the test rig for the generation of thermoelectric power. The simulation model accuracy has been demonstrated by juxtaposing the associated experimental data and computational readings. Subsequently, the feasibility and optimum range of design parameters are established by comparing the experimental and the simulation data (triggered temperature difference, voltage output, and heat flux) generated at the interface of the thermoelectric power generators. In addition, the coefficient of determination (R²) value has been evaluated statistically and verified with the current experimental results for the demonstration of the relevancy. The statistical study shows the existence of the correlation between the current experimental and the simulation model. Also, the experimental result indicates the possible implementation of the newly developed system for the recovery from the waste heat either the automobile exhaust or any other kind of dissipated heat from the industries.