Utilization of ramon seeds (Brosimum alicastrum swarts) as a new source material for thermoplastic starch production

The development and characterization of biodegradable polymers deriving from renewable natural sources has attracted much attention. The aim of this work was to partially characterize a thermoplastic starch obtained from the starch of seeds from the ramon tree (TPS‐RS) as an option to substitute thermoplastic starch from corn (TPS‐CS), in some of its applications. At 55% of relative humidity (RH), TPS‐RS had higher tensile strength and deformation than TPS‐CS. X‐ray diffraction analysis showed similar values in residual crystallinity (percentage of crystallinity that remains after plasticization process) in both TPS. The SEM micrographs showed a few remnant granular structures in the TPS‐RS. The FTIR showed a greater intensity in band at 1016 cm^?1 in the TPS‐CS and TPS‐RS in comparison with their corresponding native starch, indicating an increase in the amorphous region after plasticization. The TGA analysis showed greater thermal stability in TPS‐CS (340 °C) compared with TPS‐RS (327 °C). In addition, the glass transition temperature in both TPS was 24 °C. The results obtained represent a starting point to potentialize the use of TPS‐RS instead of TPS‐CS for the development of new biodegradable materials for practical applications in different areas. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44235.     

Pullulan: A versatile coating agent for superparamagnetic iron oxide nanoparticles

Ultrasmall superparamagnetic iron oxide (Fe₃O₄) nanoparticles coated by biocompatible pullulan (Pu‐USPIO) with sizes below 10 nm and having a magnetite core and a hydrophilic outer shell of pullulan were prepared. The formed Pu‐USPIOs were thoroughly characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, atomic force microscopy, and small‐angle X‐ray scattering experiments. The content of magnetic nanoparticles embedded into the pullulan matrix was determined by thermogravimetric analysis. Vibrating sample magnetometry analysis was used to evaluate the magnetic properties of the Pu‐USPIO samples. Because of the presence of pullulan, these nanoparticles could be conditioned in many versatile forms, from a clear solution to magnetic films, for potential applications, including magnetic hyperthermia mediators. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42926.     

Functionalized galactoglucomannan‐based hydrogels for the removal of metal cations from aqueous solutions

New types of hydrogels derived from O‐acetyl galactoglucomannan (AcGGM) hemicellulose have been synthesized and characterized. The objective of this work was to analyze the sorption capacity (S) of three types of hydrogels containing AcGGM derivatives incorporated into the carboxylic groups of the polymer chain in the AA hydrogel, sulfonic groups in the APA hydrogel, and amide groups in the acrylamide (Aam) hydrogel. These hydrogels are capable of interacting and removing ions such as cadmium [Cd(II)], copper [Cu(II)], lead [Pb(II)], nickel [Ni(II)], and zinc [Zn(II)]. The results show that AA and Aam hydrogels had a lower sorption capacity of ions compared to the APA hydrogel, which had a high sorption capacity. The maximal sorption capacity was determined by the successive enrichment method, obtaining Pb(II) amount of 48.3 mg/g of AA hydrogel, 65.8 mg/g of APA hydrogel, and 40.8 mg/g of Aam hydrogel. Hence, Pb(II) ions are greatly retained by the three hydrogels. These results are promising for the development of new materials with potential applications in metal ion removal. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44093.     

Acrylic bone cements modified with poly(ethylene glycol)‐based biocompatible phase‐change materials

The high polymerization temperature of acrylic bone cements used in hip replacement implantation may cause thermal necrosis of surrounding tissues. In order to reduce the polymerization temperature, acrylic bone cement has been modified with a biocompatible polymeric phase‐change material (PCM) based on poly(ethylene glycol) (PEG) of different molecular weights and stabilized with potato starch. Structural and morphological studies were performed, and the thermal and mechanical properties were investigated. The incorporation of PEG‐based PCM led to a decrease in the polymerization temperature of bone cement from 70 °C for unmodified cement to 58 °C for modified cement. Modified cement materials were stable in incubation tests, although acoustic analysis data revealed a decrease in propagation speed after incubation, which indicates formation of material defects (pores, cracks, voids, etc.) due to water activity. However, in the regeneration process, these defects can be filled by freshly grown bone tissue leading to better incorporation of bone cement replacements into tissue. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43898.     

Renal Protective Effects of Low Molecular Weight of Inonotus obliquus Polysaccharide (LIOP) on HFD/STZ-Induced Nephropathy in Mice

Diabetic nephropathy (DN) is the leading cause of end-stage renal disease in diabetes mellitus. Oxidative stress, insulin resistance and pro-inflammatory cytokines have been shown to play an important role in pathogeneses of renal damage on type 2 diabetes mellitus (DM). Inonotus obliquus (IO) is a white rot fungus that belongs to the family Hymenochaetaceae; it has been used as an edible mushroom and exhibits many biological activities including anti-tumor, anti-oxidant, anti-inflammatory and anti-hyperglycemic properties. Especially the water-soluble Inonotus obliquus polysaccharides (IOPs) have been previously reported to significantly inhibit LPS-induced inflammatory cytokines in mice and protect from streptozotocin (STZ)-induced diabetic rats. In order to identify the nephroprotective effects of low molecular weight of IOP fraction (LIOP), from the fruiting bodies of Inonotus obliquus, high-fat diet (HFD) plus STZ-induced type 2-like diabetic nephropathy C57BL/6 mice were investigated in this study. Our data showed that eight weeks of administration of 10–100 kDa, LIOP (300 mg/kg) had progressively increased their sensitivity to glucose (less insulin tolerance), reduced triglyceride levels, elevated the HDL/LDL ratio and decreased urinary albumin/creatinine ratio(ACR) compared to the control group. By pathological and immunohistochemical examinations, it was indicated that LIOP can restore the integrity of the glomerular capsules and increase the numbers of glomerular mesangial cells, associated with decreased expression of TGF-β on renal cortex in mice. Consistently, three days of LIOP (100 μg/mL) incubation also provided protection against STZ + AGEs-induced glucotoxicity in renal tubular cells (LLC-PK1), while the levels of NF-κB and TGF-β expression significantly decreased in a dose-dependent manner. Our findings demonstrate that LIOP treatment could ameliorate glucolipotoxicity-induced renal fibrosis, possibly partly via the inhibition of NF-κB/TGF-β1 signaling pathway in diabetic nephropathy mice.     

铁皮石斛多糖抗癌及免疫活性研究

研究了铁皮石斛多糖的抗癌及免疫活性。水提醇沉法提取铁皮石斛多糖,将其作用于癌细胞株(HepG2、A549、F9、NCCIT)和小鼠脾脏细胞、腹腔巨噬细胞,观察细胞形态变化,并用MTT法分析其对细胞增殖的作用。结果表明:铁皮石斛多糖能抑制癌细胞的增殖并促进脾脏细胞生长,铁皮石斛多糖具有一定的抗癌活性及免疫活性。     

微波辐射法在多糖接枝共聚中的应用

多糖是一种可用于合成高性能高分子材料的天然可再生资源,在自然界中蕴藏丰富。天然多糖接枝合成聚合物是制备多糖基材料的一种简便通用的方法。对目前天然多糖研究中存在的问题,接枝共聚的概念和目的,微波辐射法原理进行了介绍。同时对微波辐射法在壳聚糖、藻酸钠、纤维素、淀粉、黄原胶、瓜尔胶等多糖分子接枝中的实际应用进行了综述。     

Microparticles based on hydrophobically modified chitosan as drug carriers

In this work, a hydrophobically modified (HM) chitosan derivative was prepared by covalent linkage of C₁₂ groups to the chitosan backbone. HM‐chitosan microparticles were prepared according to an emulsification‐solvent evaporation method and naltrexone (NTX) was used as a model drug. For comparison, unmodified chitosan and poly lactic‐co‐glycolic acid (PLGA) microparticles were also tested as carriers for NTX. HM‐chitosan formed viscous semi‐dilute solutions, suggesting a high level of chain entanglements and hydrophobic associations. HM‐chitosan microparticles generally showed higher production yield and encapsulation efficiency, as compared with chitosan and PLGA. The burst release shown by chitosan microparticles was significantly reduced when using the HM‐chitosan derivative. An enhanced control of drug release was observed over at least 50 days. PLGA particles demonstrated inferior controlled release properties as compared to HM‐chitosan subsequent to the initial release stage. These results revealed the potential of hydrophobic modification of chitosan as a means to improve the stability and sustained delivery properties of the polymer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40055.     

Dissolution and stability of chitosan in a sodium hydroxide/urea aqueous solution

Medium‐molecular‐weight chitosan (MMWC; 157.5 kDa) and low‐molecular‐weight chitosan (LMWC; 53.4 kDa) samples were dissolved in an NaOH/urea solution by freeze–thaw treatment. The factors affecting dissolution were optimized, and the stability of chitosan in the produced solution was investigated. NaOH and urea concentrations of 2 and 0.67 mol/L, respectively, and a treatment temperature of ?18°C were optimized as the dissolving conditions. MMWC and LMWC could be completely dissolved in the 2 mol/L NaOH/0.67 mol/L urea solution after six and five cycles of freeze–thaw treatments, respectively. Dissolution and storage in the 2 mol/L NaOH/0.67 mol/L urea solution slightly increased the deacetylation degree of chitosan and slightly decreased the molecular weight. The solution stability of LMWC was better than that of MMWC. MMWC tended to form a gel during storage. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39819.     

Preparation of chitosan‐g‐poly(acrylamide)/montmorillonite superabsorbent polymer composites: Studies on swelling,thermal, and antibacterial properties

Superabsorbent composites based on chitosan‐g‐poly(acrylamide) and montorillonite (CTS‐g‐PAAm/MMT) were synthesized through in situ radical polymerization by grafting of crosslinked acrylamide onto chitosan backbone in presence of MMT at different contents. The formation of the grafted network was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC). The obtained porous structure was observed by scanning electron microscope (SEM). The presence of clay and its interaction with chitosan‐g‐poly(acrylamide) (CTS‐g‐PAAm) matrix was evidenced by ATR‐FTIR analysis. The morphology was investigated by both X‐ray diffraction (XRD) and SEM analyses. It was suggested the formation of mostly exfoliated structures with more porous structures. Besides, the thermal stability of these composites, observed by TGA analysis, was slightly affected by the clay loading as compared to the matrix. These hydrogel composites were also hydrolyzed to achieve anionic hydrogels with ampholytic properties. Swelling behaviors were examined in doubly distilled water, 0.9 wt % NaCl solution and buffer solutions. The water absorbency of all superabsorbent composites was enhanced by adding clay, where the maximum was reached at 5 wt % of MMT. Their hydrolysis has not only greatly optimized their absorption capacity but also improved their swelling rate and salt‐resistant ability. The hydrolyzed superabsorbent showed better pH‐sensitivity than the unhydrolyzed counterparts. The results of the antibacterial activity of these superabsorbents composites against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), assayed by the inhibitory zone tests, have showed moderate inhibition of the bacteria growth. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39747.