Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

Effect of the addition of rare earths on the activity of alumina supported copper cobaltite in CO oxidation,CH4 oxidationand NO decomposition

The effect of the addition of small amounts of rare earths(Ln=La, Ce, Nd and Gd) to alumina supported copper-cobalt spinel oxide on the catalysts efficiency in CO and CH4 oxidation and in NO decomposition was investigated. Samples of Ln/Cu Co/Al catalyst were prepared and characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), atomic absorption spectroscopy(AAS), scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS), H2-temperature-programmed reduction(H2-TPR), electron paramagnetic resonance(EPR) spectroscopy and low temperature nitrogen adsorption. The results showed that the addition of rare earths changed the surface state of the alumina supported copper-cobalt spinel catalyst. As a result, partial reduction of copper species was observed as well as migration of these species between the surface and the bulk. The Ln/Cu Co/Al catalysts behaved differently in oxidation and reduction processes. In oxidation processes where oxide structure was important, Ce/Cu Co/Al and Nd/Cu Co/Al were the most active catalysts. The catalyst Ce/Cu Co/Al was the most active in the oxidation reactions because of the availability and favorable surface distribution of the redox couples Cu+/Cu2+ and Ce3+/Ce4+. In NO decompostion, Ln-modified catalysts significantly improved the selectivity of the process to N2.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

对话

正Héctor Esrawe毕业于墨西哥伊比利亚美洲大学,2003年创建Esrawe工作室,开始了他独立设计师的职业生涯。Esrawe工作室主要涉及博物馆、酒店、餐馆、酒吧、办公室、住宅的设计以及产品包括家具的创新与定制。Héctor Esrawe认为,设计是一个将使用者和周围环境相联系并发生生动对话的过程。在选材方面,他对玻璃、木材、金属和石材等情有独钟,同时对新工艺和新材料的探索也有着极大的热忱。     

香港大馆

<正>位于香港商业中心的"大馆",其前身是中央警署、中央裁判法院及域多利监狱,一座由各种历史建筑组成并被围墙围起的古建筑群,而如今是香港现存最重要的历史遗址之一。在2006年停止使用并清空后,这里只留下一块空地以及一系列独特的建筑,其中院落由阅兵场及监狱两大部分组成。设计团队的目标是保持二者的开放性及独立性的同时赋予它们新的活     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

Applying reticular synthesis to the design of Cu-based MOFs with mechanically interlocked linkers

The concept of“robust dynamics”describes the incorporation of mechanically interlocked molecules(MIMs)into metal-organic framework(MOF)materials such that large amplitude motions(e.g.,rotation or translation of a macrocycle)can occur inside the free volume pore of the MOF.To aid in the preparation of such materials,reticular synthesis was used herein to design rigid molecular building blocks with predetermined ordered structures starting from the well-known MOF NOTT-101.New linkers were synthesized that have a T-shape,based on a triphenylene tetra-carboxylate strut,and their incorporation into Cu(II)-based MOFs was investigated.The single-crystal structures of three new MOFs,UWCM-12(fof),β-UWCM-13(loz),UWCM-14(lil),with naked T-shaped linkers were determined;β-UWCM-13 is the first reported example of the loz topology.A fourth MOF,UWDM-14(lil)is analogous to UWCM-14(lil)but contains a[2]rotaxane linker.Variable-temperature,²H solid-state NMR was used to probe the dynamics of a 24-membered macrocycle threaded onto the MOF skeleton.     

Nickel phosphonate MOF as efficient water splitting photocatalyst

A novel microporous two-dimensional(2D)Ni-based phosphonate metal-organic framework(MOF;denoted as IEF-13)has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques.Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group Pi having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand.Remarkably,this material exhibits coordinatively unsaturated nickel(II)sites,free-P0₃H₂and-P0₃H acidic groups,a C0₂accessible microporosity,and an exceptional thermal and chemical stability.Further,its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis.In this sense,the photocatalytic activity for challenging H₂generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated,constituting the first report for a phosphonate-MOF photocatalyst.IEF-13 is able to produce up to 2,200 fimol of H₂per gram using methanol as sacrificial agent,exhibiting stability,maintaining its crystal structure and allowing its recycling.Even more,170μmol of H₂per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting,being this reaction limited by the 0₂reduction.The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials.     

基于新标准的俄罗斯釆金业职业风险评估

当前俄罗斯正在进行立法改革以实现治理体系现代化，其中改革的重点是国家管理体系中的劳动保护、工业安全和突发事件的应急处理。过去的立法体系侧重于对受伤员工提供健康补偿和医疗救护，而新的立法体系则以预防为主，以期通过建立完善的风险管理机制和运行规则，提高安全生产水平、普及安全文化教育，保障员工的生命安全。新标准强调企业必须进行职业风险评估，并将职业风险评估纳入企业工作管理体系。论文以采金业为例，选取伊尔库茨克州波戴波区金矿露天采场为研究案例，探讨了现代化职业风险评估的方法，明确了职业风险评估首先要进行危害鉴别，编制了风险源管理档案清单。采用实测员工风险因素的“记分法”和数学模拟“矩阵法”完成了伊尔库茨克州波戴波区金矿露天采场主要职业的风险评估。研究表明: 在钻井爆破作业场所，由碎石的喷射、粉尘的排放和噪声效应引起的危险为不可接受风险，通过实施安全生产制度（即遵守安全标准和技术要求、为工人提供防护装备）,可将高风险和不可接受风险化解为可接受风险；阐述了高风险职业，编制了风险手册，提出了改善工作条件的首要措施是消除影响爆破手和钻机操作员的有害因素，并为员工提供能更有效预防噪音和振动的个人防护用品。