Modelling the cross‐contamination of Listeria monocytogenes in pork during bowl chopping

This study has developed a predictive model for the cross‐contamination of pork by Listeria monocytogenes during bowl chopping. The transfer rates of L. monocytogenes were measured in sixteen chopping scenarios based on practical work. Meanwhile, contaminated bowl chopper was cleaned with either a dry rag (DR), warm water (WW) or 70% ethanol + water (EW), respectively. It was showed that significant differences (P < 0.05) were observed among the three cleaning methods on the reduction of L. monocytogenes, the greatest log reduction being achieved by EW. Moreover, the model introduced by a previous study, predicting cross‐contamination of L. monocytogenes during meat slicing, was improved and validated in this study. Verification results showed that the improved model was acceptable for predicting L. monocytogenes cross‐contamination during pork chopping with coefficients of determination (R² > 0.82), accuracy factors (A_f < 1.44), bias factors (B_f < 1.42), and root mean square error (RMSE < 0.99). Furthermore, the modified model might provide an effective tool for assessing the risk of the cross‐contamination of meat products.     

催化裂化催化剂铁污染研究进展

介绍近年关于FCC催化剂铁中毒现象的研究进展。平衡剂上铁存在新鲜催化剂自身铁、原油原有铁和过程铁3个来源,其中,高酸原油的过程铁含量已不容忽视。催化裂化过程中,原料油中以环烷酸铁为主的铁物种不断沉积在催化剂的表面,与催化剂中的钠、氧化硅形成低熔点共熔物,形成覆盖平衡剂表面的光滑结构,堵塞催化剂的孔道,导致汽油产率下降,严重影响装置稳定运行。根据铁中毒的机理研究,提出加强人员技术交流与培训、提高分析检测频次、应用抗铁污染催化剂、铁中毒解决方案等预防和应急措施,为加工高铁含量原料油催化裂化装置的长期稳定运行提供技术参考。     

食品中兴奋剂污染研究现状

随着食品和膳食补充剂的市场变得越来越全球化,食品和膳食补充剂的安全性、质量和功效引起人们的高度关注。近年来,食品和膳食补充剂中被检测出兴奋剂阳性的事件屡见不鲜。运动员在误服误用被兴奋剂污染的食品和膳食补充剂后,会导致兴奋剂检测呈阳性,这对运动员和国家都造成了重大损失。由于摄入受污染的食品或膳食补充剂会导致严重的健康损害或意外违反反兴奋剂规定,因此准确了解食品和膳食补充剂中兴奋剂污染种类是十分有必要的。本文主要从食品和膳食补充剂中兴奋剂污染的来源和种类以及常用的检测方法等方面进行简要概述,以提高运动员对高风险食品的警惕和防范,避免因误服被兴奋剂污染的食品、膳食补充剂而导致的不良分析结果。     

Adhesion of resin cements to contaminated zirconia resin cements on zirconia: effect saliva-contamination and surface conditioning

This study evaluated the adhesion of resin cements to zirconia after saliva contamination using resin cements with different chemistries. Zirconia discs (N?=?240, n?=?10 per group) were randomly divided into three groups: (a) C: No contamination (Control), (b) S: Contamination with saliva, (c) S?+?AA: Contamination with saliva followed by air-abrasion (CoJet). While half of the specimens were not conditioned, the other half were conditioned with 37.5% H₃PO₄ for 60?s. After rinsing, all specimen surfaces were silanized (Monobond Plus). Resin cements based on either methacrylate (Variolink II–VL) or MDP monomer (Panavia 21-PN) were polymerized on the substrates. The specimens were randomly divided into two further groups to be tested either after (a) 24?h dry storage at 37?°C or (b) thermocycling (×5000, 5–55?°C). Microshear bond (MSB) tests were conducted in a Universal Testing Machine and failure types were analyzed. Data were analyzed using Univariate analysis and Tukey’s tests (alpha = 0.05). While saliva contamination, 37.5% H₃PO₄ application (p?<?.001) and aging (p?<?.05) significantly affected the bond results, cement type did not show significant difference after aging (p?>?.05). Adhesive strength of PN (1.2–4.4?MPa) on saliva contaminated and etched zirconia was more stable than that of VL (0–2.8?MPa). After aging, bond strength results decreased the most with VL (3–100%) compared to PN (32–71%) but the decrease was less in the air-abraded groups after aging (VL: 3%; PN: 32%). Exclusively adhesive failures were experienced in all groups.     

A hybrid interval-parameter fuzzy robust programming method and its application to filter management strategy in fluid power systems

An interval-parameter fuzzy robust programming (IFRP) method is developed for the assessment of filter allocation and replacement strategies in a fluid power system (FPS) under uncertainty. The developed IFRP can effectively handle the uncertainties expressed as fuzzy sets, interval values, and their combinations, which exist in contaminant ingression/generation of the system and contaminant-holding capacity of filter without making assumptions on their probabilistic distributions. The fuzzy decision space can be delimited into a more robust one with the uncertainties being specified through dimensional enlargement of the original fuzzy constraints, leading to enhanced robustness for the optimization process. Results indicate that the developed IFRP can not only help decision-maker to identify optimal filter allocation and replacement strategies to control the contamination level of FPS with a minimized system-cost and system-failure risk under multiple uncertainties, but also mitigate uncertainties through abating interval widths of the replacement periods and service life under different contamination ingression/generation rates.     

Volatile organic compounds emitted by filamentous fungi isolated from flooded homes after Hurricane Sandy show toxicity in a Drosophila bioassay

Superstorm Sandy provided an opportunity to study filamentous fungi (molds) associated with winter storm damage. We collected 36 morphologically distinct fungal isolates from flooded buildings. By combining traditional morphological and cultural characters with an analysis of ITS sequences (the fungal DNA barcode), we identified 24 fungal species that belong to eight genera: Penicillium (11 species), Fusarium (four species), Aspergillus (three species), Trichoderma (two species), and one species each of Metarhizium, Mucor, Pestalotiopsis, and Umbelopsis. Then, we used a Drosophila larval assay to assess possible toxicity of volatile organic compounds (VOCs) emitted by these molds. When cultured in a shared atmosphere with growing cultures of molds isolated after Hurricane Sandy, larval toxicity ranged from 15 to 80%. VOCs from Aspergillus niger 129B were the most toxic yielding 80% mortality to Drosophila after 12 days. The VOCs from Trichoderma longibrachiatum 117, Mucor racemosus 138a, and Metarhizium anisopliae 124 were relatively non‐toxigenic. A preliminary analysis of VOCs was conducted using solid‐phase microextraction‐gas chromatography‐mass spectrometry from two of the most toxic, two of the least toxic, and two species of intermediate toxicity. The more toxic molds produced higher concentrations of 1‐octen‐3‐ol, 3‐octanone, 3‐octanol, 2‐octen‐1‐ol, and 2‐nonanone; while the less toxic molds produced more 3‐methyl‐1‐butanol and 2‐methyl‐1‐propanol, or an overall lower amount of volatiles. Our data support the hypothesis that at certain concentrations, some VOCs emitted by indoor molds are toxigenic.     

Experimental investigation of two phases evaporative heat transfer coefficient of carbon dioxide as a pure refrigerant and oil contaminated under forced flow conditions in small and large tube

The evaporative two-phase heat transfer coefficient of CO₂/oil contaminated as a refrigerant under forced flow conditions through a smooth horizontal tube was experimentally investigated. The experiments were carried out for two test sections of evaporators. The test sections were made of seamless precision steel tubes with a length of 1.12 m and two inner diameters of 4 and 10 mm to fulfill the influence of the evaporator geometry. Experimental parameters include mass fluxes varied from 90 to 750 (kg m⁻² s), heat flux ranged from 5 to 40 (kW m⁻²), evaporation temperatures changed from −10 to −35 °C, and the oil concentration is varied from 0.2 to 7 %. The results from the experiment are compared with those calculated from correlations reported in the literature. The results of this study are of technological importance for the efficient design of evaporators when systems are assigned to utilize CO₂ as a refrigerant.     

How do the plants used in phytoremediation in constructed wetlands,a sustainable remediation strategy,perform in heavy‐metal‐contaminated mine sites?

This review draws on knowledge for the treatment of heavy‐metal leachate in contaminated mine sites. Mine waste rock dumps and tailings generate a continuous stream of metalliferous and saline leachate over the long term. The mining industry has many legacy sites, which have compromised aquatic ecosystems and groundwater because of heavy‐metal contamination. Chemical and engineering methods are available and have been extensively utilised. However, these methods require intensive energy and often produce substantial volumes of secondary waste. We therefore argue in favour of phytoremediation as a sustainable remediation strategy leading towards efficient and sustainable metal removal and immobilisation through constructed wetlands.     

基于CAN总线的油液在线分析检测系统设计

针对目前油液分析检测技术大多不能实现实时在线检测的现状,利用CAN总线的特点,提出一种基于CAN总线的油液在线分析检测系统,详细介绍系统方案和原理,重点阐述油液监测装置的设计和CAN总线节点的软硬件实现。     

西南某焦化场地土壤中典型污染物的特征分布

在西南某焦化场地采集了18个土壤剖面样和5个表层样,利用GC-MS等,对土壤中的总氰化物、重金属、挥发性有机物、总石油烃和二噁英等进行了定量分析,并研究了其在不同功能区土壤中的特征分布。结果表明：① 该焦化厂污染较严重的区域主要在推焦线路、焦油回收点、沥青传送带和固废室外堆场附近;② 厂区土壤中菲、蒽、4-甲基酚、2,4-二甲基酚和甲苯的浓度均未超过展览会用地土壤质量评价A级标准,而总氰化物、汞、萘、荧蒽、芘、苯并\[a\]芘、咔唑、石油烃超标点较多;③ 二噁英在本次所检测的3个样点中全部被检出,但都不超过《荷兰土壤修复通告2009》中的土壤修复干涉值。