基于UG的采煤机防爆盖板三维标注及数控工艺研究

随着三维CAD技术的发展,产品制造信息在三维模型和二维图纸之间的反复传递,严重影响了产品制造信息的正确、快速传递。基于三维产品制造信息技术,以采煤机防爆盖板为例,在UG NX10.0中建立了防爆盖板的三维模型并进行了三维标注,设计了加工工艺路线,规划了数控加工刀具轨迹,进行了加工仿真,验证了数控加工的正确性,在此基础上完成了采煤机防爆盖板的三维工艺式设计。该研究对基于模型定义的数字化设计与制造研究,实现制造业信息化具有重要意义。     

Solid lipid nanoparticles of Annona muricata fruit extract: formulation,optimization and in vitro cytotoxicity studies

The present study was aimed to develop Annona muricata fruit extract loaded solid lipid nanoparticles (SLNs) and explore its cytotoxic potential in vitro model of breast cancers. Extract loaded SLNs were successfully prepared by high-pressure homogenization followed by ultrasonication method and optimized using 2³ full factorial design. The extract loaded SLNs were characterized using different parameters such as particle size (PS), % entrapment efficiency (EE), zeta potential (ZP) and % cumulative drug release (CDR). The SLNs formulation was optimized on the basis of software analysis with an overall desirability factor. The PS and %EE of the optimized formulation were found to be 134.8?nm and 83.26%, respectively. The optimized formulation showed a CDR of 79.83% up to 48?h. In vitro cytotoxicity efficacy of extract loaded SLNs was determined using MTT and Apoptosis assay and compared to that of a free extract. The SLNs showed a notable apoptotic effect and better efficacy to kill MCF7 cancer cells as compared to free extract. Thus, extract loaded SLNs could be an alternative dosage form which possibly controls therapeutic action with reducing side effect.     

Dialogic weaving: a favorable tension between design and craft

Focusing on a process where a designer embeds herself in craftspeople’s workshops with the intention of ‘learning from inside’ and ‘making together’; this paper proposes pathways for considering collaboration between designers and craftspeople via digital fabrication and weaving. The tension of forces that make weaving possible, act as an analogy for this collaboration as well as providing the title of the project as ‘One Over, One Under’. The project proposes a mode of working and a spectrum of outcomes where the designer has a first-hand experience of production techniques, engages in a serious and continuous dialogue through making, and develops an intervention that also brings forth her own skill set (introducing digital fabrication and structural variations), thus transforming the conventions and boundaries between established roles and manufacturing techniques. An experiment that resulted in a series of objects considering both the technologies of production and the input of the designer, this process not only increases the potentials that crafts hold for the field of design, but it also offers possibilities of collaboration and a further articulation of the design act.     

Spillover effects of distribution grid tariffs in the internal electricity market: An argument for harmonization?

In many countries, distribution grid tariffs are being reformed to adapt to the new realities of an electricity system with distributed energy resources. In Europe, legislative proposals have been made to harmonize these reforms across country borders. Many stakeholders have argued that distribution tariffs are a local affair, while the European institutions argued that there can be spillovers to other countries, which could justify a more harmonized approach. In this paper, we quantify these spillovers in a simplified numerical example to give insight and an order of magnitude. We look at different scenarios, and find that the spillovers can be both negative and positive. To be able to quantify these effects, we developed a long-run market equilibrium model that captures the wholesale market effects of distribution grid tariffs. The problem is formulated as a non-cooperative game involving consumers, generating companies and distribution system operators in a stylized electricity market.     

A new design strategy for DC/DC LLC resonant converter: Concept,modeling, and fabrication

In this paper, a new design procedure for LLC converter has been introduced. In fact, this method is a computer-based design algorithm based on a numerical technique. In the process of designing, the value of the resonant element is obtained by solving the LLC converter fundamental equation. This converter will be controlled by using state feedback, such as output voltage variable. As a matter of fact, in a control system, the change of output voltage (because of load variation) will affect the switching frequency, so the output voltage will be tuned. In the designing process, the fundamental equations of LLC converter are obtained, and the value of the resonant elements is calculated. Also, a comparison analysis is carried out between the proposed and typical methods. The simulation is done to investigate the validity of the proposed method. Moreover, a prototype is manufactured, and the experimental test is done to evaluate its applicability.     

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering, the studies related to risk analysis methodology, design, and operational management, physical phenomena, and emergency preparedness and nuclear security, have been progressed. Especially, ‘risk analysis methodology’ and ‘design and operational management’ are the main categories of the field, in which more than half of published articles on Journal of Nuclear Science and Technology are related to these categories.     

Robustness of asymptotic accelerated life test plans to small‐sample settings

Much of the statistical literature on optimal test planning for accelerated life testing utilize asymptotic methods to derive optimal test plans. While sufficient effort is made to assess the robustness of these test plans to the choice of design parameters and distribution assumptions, there is very little literature on the performance of asymptotic test plans relative to small samples (on the order of 10‐15 samples). An alternative concern is that the asymptotic test plans may not necessarily be the true “optimal” test plan for a given sample size. The purpose of this research is to present exact or “near‐exact” methods for developing test plans and compare the performance of these test plans with corresponding asymptotic test plans in small‐sample settings. The optimal location of design points and sample allocation is determined using each method for lognormal and Weibull lifetime distributions with both complete and Type 1 right‐censored data under two selected acceleration factor models. The investigations reveal that asymptotic test plans tend to corroborate quite well with exact test plans and thus are suitably robust to small‐sample settings in terms of optimal variance.