Robustness of asymptotic accelerated life test plans to small‐sample settings

Much of the statistical literature on optimal test planning for accelerated life testing utilize asymptotic methods to derive optimal test plans. While sufficient effort is made to assess the robustness of these test plans to the choice of design parameters and distribution assumptions, there is very little literature on the performance of asymptotic test plans relative to small samples (on the order of 10‐15 samples). An alternative concern is that the asymptotic test plans may not necessarily be the true “optimal” test plan for a given sample size. The purpose of this research is to present exact or “near‐exact” methods for developing test plans and compare the performance of these test plans with corresponding asymptotic test plans in small‐sample settings. The optimal location of design points and sample allocation is determined using each method for lognormal and Weibull lifetime distributions with both complete and Type 1 right‐censored data under two selected acceleration factor models. The investigations reveal that asymptotic test plans tend to corroborate quite well with exact test plans and thus are suitably robust to small‐sample settings in terms of optimal variance.     

Speciation of copper in high chloride concentrations,in the context of corrosion of copper canisters

Canisters with a cast iron insert for mechanical strength and a 50-mm thick copper shell as corrosion protection are planned to be used for disposal of spent nuclear fuel in Sweden and Finland. Chloride can be considered “beneficial”, as it promotes active dissolution of copper rather than passivation (which might result in pitting), but a high concentration of chloride in solution would increase the driving force for corrosion through the formation of soluble copper chloro complexes. Thermodynamic calculations are performed in this study with the PHREEQC software and three of its accompanying databases, and a comparison with experimental data is performed to select the database to be used when evaluating repository performance. The activity coefficient models are given special attention. For the assessment of chloride-assisted corrosion of a KBS-3 canister, chloride concentrations pessimistically up to 5 mol/kg are used (in Finland and Sweden, the groundwater and bentonite porewater chloride concentrations are not expected to exceed 1 mol/kg). The resulting copper solubilities are then considered in different mass transport cases.     

Dynamics of lipid droplets in the endometrium and fatty acids and oxylipins in the uterine lumen,blood, and milk of lactating cows during diestrus

Our objective was to investigate the lipid content of uterus, blood plasma, and milk at early, mid, and late diestrus. Lactating cows (n = 30) had the estrous cycle and ovulation synchronized by administration of exogenous hormones. Cows were blocked by parity and assigned randomly to receive transcervical uterine flushing and biopsy on d 5 (early diestrus), 10 (mid diestrus) or 15 (late diestrus) of the estrous cycle. Flushing and endometrial biopsy were performed in the uterine horn ipsilateral to the corpus luteum. The recovered flushing was used for analyses of lipid composition by liquid chromatography-tandem mass spectrometry and the biopsy was used for investigation of lipid droplet abundance in endometrial cryosections using a neutral lipid fluorescent dye. In addition, blood and milk samples were collected from all cows on d 5, 10, and 15. All blood samples were used to measure the concentration of progesterone in plasma, and all milk samples were used to determine milk composition. Subsamples of blood plasma and milk were also used to evaluate the composition of fatty acids and oxylipins using the same methodology used for uterine flushing samples. The abundance of lipid droplets in the endometrium increased 1.9-fold from d 5 to 10, and 2-fold from d 10 to 15. Concentration of long-chain fatty acids and oxylipins in uterine flushing were, on average, 2.2 and 2.5 times greater in samples collected on d 15 compared with those collected on d 5 and 10. These differences were not observed in blood and milk, suggesting that accumulation of fatty acids and oxylipins in the uterus is regulated locally. In addition to concentration, the profile of individual fatty acids and oxylipins in uterine lumen changed substantially during diestrus. The main categories with increased abundance at late diestrus were mono- and polyunsaturated fatty acids, and oxylipins derived from arachidonic acid, dihomo-γ-linolenic acid, and docosahexaenoic acid. In conclusion, fatty acids and oxylipins accumulate in the uterine lumen during diestrus and might work as a mechanism to supply these lipids to the developing conceptus at late diestrus, when the onset of elongation occurs and substantial synthesis of biomass and cell signaling by lipid mediators are required.     

Sources and dynamics of semivolatile organic compounds in a single‐family residence in northern California

Semivolatile organic compounds (SVOCs) emitted from building materials, consumer products, and occupant activities alter the composition of air in residences where people spend most of their time. Exposures to specific SVOCs potentially pose risks to human health. However, little is known about the chemical complexity, total burden, and dynamic behavior of SVOCs in residential environments. Furthermore, little is known about the influence of human occupancy on the emissions and fates of SVOCs in residential air. Here, we present the first‐ever hourly measurements of airborne SVOCs in a residence during normal occupancy. We employ state‐of‐the‐art semivolatile thermal‐desorption aerosol gas chromatography (SV‐TAG). Indoor air is shown consistently to contain much higher levels of SVOCs than outdoors, in terms of both abundance and chemical complexity. Time‐series data are characterized by temperature‐dependent elevated background levels for a broad suite of chemicals, underlining the importance of continuous emissions from static indoor sources. Substantial increases in SVOC concentrations were associated with episodic occupant activities, especially cooking and cleaning. The number of occupants within the residence showed little influence on the total airborne SVOC concentration. Enhanced ventilation was effective in reducing SVOCs in indoor air, but only temporarily; SVOCs recovered to previous levels within hours.     

Chromatographic characterisation of aptamer-modified poly(EDMA-co-GMA) monolithic disk format for protein binding and separation

The introduction of aptameric ligands onto disk-monolithic adsorbent, representing a unique strategy for convective isolation of target molecules with high specificity and selectivity, is investigated for the first time. Experimental results showed that the disk monolith possessed a good permeability of 1.67 ± 0.05 × 10^–14 m² (RSD = 3.2%). The aptameric ligand density for the aptamer-modified disk monolith was 480 pmol/uL. Chromatographic analysis of the aptamer disk-monolith efficiency showed an optimum linear velocity of 126 cm/min (≈0.25 mL/min) at room temperatures 25 ± 2°C. The theoretical number of plates corresponding to the optimum linear velocity was 128.2 with an height equivalent to the theoretical plate of 0.022 mm. The disk aptamer-immobilised monolithic system demonstrated good selectivity and isolation of thrombin from non-targets.     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Comparison of two low-hazard organic solvents as individual and cosolvents for the fabrication of polysulfone membranes

Petroleum-derived solvents commonly used in membrane fabrication are often hazardous and toxic, so the investigation of safer alternatives is important. In this study, two low-hazard solvents, methyl 5-(dimethylamino)-2-methyl-5-oxopentanoate (Rhodiasolv® PolarClean) and gamma-valerolactone (GVL), were investigated as sole solvents and as cosolvents to cast polysulfone membranes via nonsolvent induced phase inversion. Normalized viscosity was introduced as an indicator of dope solution homogeneity and was used to compare the required time of mixing to achieve full dissolution of the polymer in the different solvents/solvent mixtures. All dope solutions made with low-hazard solvents were found to be more viscous than those made with traditional solvents, which meant additional mixing time was needed, and that fabricated membranes were morphologically different. With respect to operation, membranes cast from dope solutions containing equal amounts of PolarClean and GVL displayed the most similar flux curves and solute rejection to those made using the traditional solvent tested.