低阻油层水平井比采油指数预测方法及应用

针对渤海低阻油层测井渗透率校正比采油指数精度不高,水平井实际产能与初始方案的产能差异较大的问题。根据测井学基本理论,建立了比采油指数与测井中主要参数的相关式,利用A油田低阻油层水平井的实际生产数据,经过非线性回归,得到利用泥质含量和电阻率校正水平井比采油指数的新方法。研究结果表明:该成果计算水平井产能与实际产能误差-10%~9.7%。研究成果对低阻油层水平井的产能预测具有指导意义。     

具有高耐蚀性和导电性的掺Cr类金刚石非晶碳的化学式解析

Cr掺杂的类金刚石非晶碳具有良好的导电性和耐腐蚀性,这对于燃料电池金属双极板涂层改性特别重要。使用团簇加连接原子模型对其非晶结构进行了详细解析,在该模型中,良好的玻璃形成材料由覆盖特征性最近邻团簇加上几个下一壳层原子的结构单元来表述。根据文献,在Cr掺杂的类金刚石非晶碳中占优势的团簇是Cr中心和C壳层的[Cr-C4]四面体团簇,然后将该团簇与适当的连接原子匹配,以满足电子轨道饱和原理。由此推导出了两个最优组成式,即[Cr-C4]CrC3(22.2%Cr)和[Cr-C4]Cr3C2(40%Cr),它们显示出良好的非晶态结构稳定性。实验结果显示,所提出的这两组化学组成的涂层材料兼具低电阻率(低至10-4Ω·cm)和优异的耐腐蚀性(腐蚀电流密度~10^-2μA/cm^2)。在sp2键含量和渗流理论的框架内讨论了导电和耐蚀的协同行为。这项工作验证了团簇加连接原子模型在具有高耐腐蚀性和高导电性的涂层材料成分设计中的可行性。     

Silver-plated polyamide fabrics with high electromagnetic shielding effectiveness performance prepared by in situ reduction of polydopamine and chemical silvering

In this article, the silver-plated polyamide fabrics (SPPAFs) with high electroconductibility and shielding effectiveness were fabricated by using in situ reduction of polydopamine and chemical silvering. The effects of SPPAFs dopamine (C₈H₁₁O₂N) and silver nitrate (AgNO₃) concentration on surface resistivity and electromagnetic interference shielding effectiveness were studied. The results showed that the surface resistivity of SPPAFs can reach a minimum value of 0.06 ± 0.014 Ω cm⁻¹, when C₈H₁₁O₂N concentration is 4 g L⁻¹ and the AgNO₃ concentration is 120 g L⁻¹. The shielding effectiveness of SPPAFs in the wide frequency range of 10–3000 MHz increases with the increase in the concentration of AgNO₃, and increases first and stabilizes afterward with increasing C₈H₁₁O₂N concentration. When the concentration of C₈H₁₁O₂N and AgNO₃ is 3 and 120 g L⁻¹, respectively, mean shielding effectiveness values in the low-, medium-, and high-frequency bands are 71.3, 73.8, and 76.1 dB, respectively. Moreover, the mean shielding effectiveness values is 83.79 dB in the frequency range of 1.2–2.3 GHz. The dominant shielding mechanism of SPPAFs is the reflected electromagnetic waves and the absorption shielding effectiveness is less than 2 dB. The average electromagnetic shielding values of SPPAFs are above 67 dB after 16 weeks of storage, when C₈H₁₁O₂N concentration is 4 g L⁻¹ and the AgNO₃ concentration is 80 and 100 g L⁻¹. The prepared SPPAFs show promising applications in military textiles and smart wearable clothing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48227.     

Optical properties and electrical resistivity of boron-doped ZnO thin films grown by sol–gel dip-coating method

Sol–gel dip-coating was used to grow ZnO thin films doped with various concentrations of B ranging from 0 to 2.5 at.% on quartz substrates. The effects of B doping on the absorption coefficient (α), optical band gap (E_g), Urbach energy (E_U), refractive index (n), refractive index at infinite wavelength (n_∞), extinction coefficient (k), single-oscillator energy (E_o), dispersion energy (E_d), average oscillator strength (S_o), average oscillator wavelength (λ_o), moments M₋₁ and M₋₃, dielectric constant (ε), optical conductivity (σ), and electrical resistivity (ρ) of the BZO thin films were investigated. The transmittance spectra of the ZnO and BZO thin films show that the transmittance of the BZO thin films was significantly higher than that of the ZnO thin films in the visible region of the spectrum and that the absorption edge of the BZO thin films was blue-shifted. The BZO thin films exhibited higher E_g, E_U, and E_o and lower E_d, λ_o, M₋₁ and M₋₃ moments, S_o, n_∞, and ρ than the ZnO thin films.     

Semi-analytical modeling of the coupled strain and low-temperature dependence of the normal-state resistivity in Nb3Sn

A semi-analytical modeling framework on the microscopic basis is proposed in this paper to predict the low-temperature transport properties of strained Nb₃Sn superconductors. The theoretical predictions agree well with experimental observations, which indicate that the competitions between the strain state-dependent variations in the phonon spectrum and the electron density of states (DOS) are an important consideration in interpreting the coupled low temperature-strain sensitivity of resistivity in superconducting Nb₃Sn. The model is helpful for identifying the scaling law describing the anomalies in the strain dependence of superconducting critical properties of Nb₃Sn conductors.     

Non-destructive evaluation of cracks in massive concrete using normal dc resistivity logging

Discontinuities are one of the most harmful damage to the durability of concrete structures. Currents approaches are limited to assessments of surface damages, even if non-destructive methods appear to be effective for the detection and the location of cracks. That is why, these methods might be unsuitable for investigation of massive concrete body as dams and locks. Present works aim at the presentation of new results with electrical resistivity to study damages within concrete structures. In this article, the electrical resistivity focused on the study of cracks and discontinuities (concrete joints, interfaces…) in massive concrete structures by measurements done in preexisting boreholes. The used array is the normal dc resistivity logging. The study presents numerical and experimental results. First, modeling allows correcting experimental data. Then, development shows the sensitivity relatively to the discontinuity characteristics (aperture and the resistivity contrast between the discontinuity and the concrete). The tests on a real structure are carried out to define the methodology for on-site measurement. Results support the modeling.     

Electrical resistivity distribution of silicon ingot grown by cold crucible continuous melting and directional solidification

A multicrystalline silicon ingot was grown by cold crucible continuous melting and directional solidification. The electrical resistivity, shallow level impurities׳ concentrations and microstructure of the ingot were measured, and their relationships were studied and discussed. The results show that in the vertical direction the electrical resistivity gets its maximum value at the height of 90 mm and then decreases toward both sides. In the horizontal direction, it is distributed uniformly in the inner area and increases slightly in the peripheral area. The electrical resistivity of the silicon ingot is affected by its shallow level impurities׳ concentrations and its microstructure. Among these impurities the effect of Al is less than those of B and P, since Al tends to form complex precipitates with other elements.     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.     

人工神经网络用于电除盐产水水质预测研究

为了实现化工行业高纯水全自动生产,本文利用电除盐（electrodeionization,EDI）技术替代传统的混床技术,并研究了人工神经网络对EDI产水过程模拟仿真的可行性,采用误差反向传播网络（BP网络）建立了进水流量、电导率、pH值以及工作电压与EDI透过水电阻率之间关系的动态模型,并对不同的训练样本归一化方法和训练方法进行比较。结果表明,在网络隐含层层数为1、节点数为13时,采用归一化方法三能够较好的预测EDI透过水电阻率,且该模型可用于EDI除盐过程的动态描述,为实现化工行业高纯水全自动生产奠定了基础。     

混凝土中钢筋腐蚀速率模型研究进展

预测混凝土中钢筋的腐蚀速率对腐蚀扩展阶段的发展非常重要,同时也能表征腐蚀导致的混凝土保护层开裂的时间。讨论了已有的钢筋腐蚀速率模型,包括经验模型、反应（氧气扩散与混凝土电阻率）控制模型和电化学模型。此外,根据以前的研究成果总结了钢筋腐蚀的时变性、局部腐蚀性与随机性等特征,并提出了准确预测腐蚀速率所需要解决的关键问题。