X-ray diffraction and Raman scattering in SbSI nanocrystals

Lattice structure and rod-like shaped SbSI nanocrystals obtained by ball milling with rod thickness down to 70 nm, as estimated from X-ray diffraction (XRD) and electron microscopy, is similar to that of the bulk crystals. The dependence of the grain size on the milling duration is discussed in view of the chain-like crystalline structure of SbSI. Possible factors, responsible for the observed Raman line broadening, are discussed, scattering by surface phonons being considered the predominant one.     

基于ADSP21XXC运行环境下FFT的实现

介绍了数字信号处理器ADSP21XX芯片的特点以及实现FFT(快速离散付里叶变换)的方法，给出了ADSP21XX的C和汇编混合编程的特点及技巧。     

A concept for the generation of out-of-plane distortion from tailored FRP laminates

The phenomenon of thermally induced distortions in unsymmetrical laminates is well understood, and it may be shown that a square, unsymmetrical 0.90 laminate will tend to form two stable geometries with a snap-through phenomenon between them. This paper discusses laminates in which at each point the lay-up is symmetrical across the laminate mid-plane, but which still exhibit multiple stable geometries. The number of stable geometries can be controlled by the details of the lay-up from the minimum of two to, in principle, an unlimited number. In addition it will be shown how a similar process can be used to generate multiple stable stress states and geometries in unidirectional laminates. This paper represents a very preliminary experimental investigation of the design space available for such composite laminates. Possible applications of composites with multiple stable geometries are noted.     

微机械可调谐滤波器的研制

利用 Ga As/Al Ga As分布反馈 Bragg反射镜在 Ga As衬底上制作了一个微机械的调谐滤波器 .该器件在 7V调谐电压下调谐范围达28nm     

AT89C51单片机在电话远程控制器中的应用

设计以AT89C51单片机作为控制核心的电话远程控制器,重点介绍该控制器的各模块组成、原理及具体实现的电路,该控制器采用现有的电话线路进行通信,无需重新布线且通信距离不受限制,经实际运行表明,该控制器具有运行可靠、成本低、操作方便,适用性强的特点、可以广泛应用于城市社区,具有较大的推广价值。     

真空铸造高强度C/Mg复合材料

本文介绍用真空铸造法制造抗拉强度超过1000MPa的高强度C/Mg复合材料。将T300纤维经C-Si-O梯度涂层处理后单向排布于型腔内,在真空下注入ZM-5合金液,凝固后即得C/Mg复合材料零件或试样。试样的抗拉强度在纤维体积分数为0.35时达1050MPa。本文讨论C-Si-O梯度涂层对获得高强度复合材料的作用。     

小卫星及多星测控的技术发展

本文从小卫星、星座飞速发展以及对测控通信系统新的要求出发，介绍了综合基带、连续波多波束相控阵天线的功能、特点及工作原理，提出了建立新型多功能智能化测控通信站的设想。     

既有钢筋混凝土框架结构抗震加固若干问题探讨

针对钢筋混凝土框架结构抗震加固问题的复杂性 ,本文深入分析了抗震加固结构的受力特征 ,探讨了卸荷对加固构件承载力的影响 ,并针对抗震加固后的“隐含危险转移”问题提出了相应的对策。最后 ,提出了抗震加固的基本原则 ,可供结构抗震加固时参考     

Ionic transport in amorphous anodic titania stabilised by incorporation of silicon species

Incorporation of silicon species from an alloy substrate into anodic titania is shown to stabilise the structure of the film, facilitating investigation of the ionic transport processes in amorphous titania grown at high efficiency. Thus, an amorphous anodic film developed on a sputtering-deposited Ti-6 at.%Si alloy formed to 100 V in phosphoric acid electrolyte in contrast to a partially crystalline film developed on relatively pure titanium at <20 V. Silicon species, which are immobile and act as marker species in the growing film, are present in the inner 58% of the film thickness. Evidently, the film material forms simultaneously at the film/electrolyte and alloy/film interfaces by co-operative transport of cations and anions, as is usual in amorphous anodic oxides. The phosphate anions incorporated from the electrolyte migrate inward at 0.34 times the rate of O²⁻ ions and hence are present in the outer 62% of the film thickness.     

C/O能谱测井数据预处理的两点改进意见

简单介绍了碳氧比测井的原理及通常的数据处理方法。分析了由常规数据处理所得曲线仍然存在的问题及可能的成因 ,并给出了可行的修正办法。讨论了另一种可行的曲线异常数据的检测、剔除方法。实践表明 :文章讨论的两点建议都是可行的 ,并且在提高测量曲线质量的同时也提高了地层含油饱和度的解释精度。