TRIZ创新方法剖析路面渗水仪底座和路面的密封性能

针对路面渗水仪底座和路面的密封性能不良问题，运用TRIZ创新方法的因果链、技术矛盾、物理矛盾、进化分析等工具找到原因，获得解决方案。通过调研及试用，不断优化及调整所选方案，达到最优解决效果。应用效果证明TRIZ理论有助于创新并快速解决工程实际问题。     

Effects of andalusite and kyanite addition on the microstructure,thermo-mechanical properties and corrosion resistance of ultralow-cement bauxite-corundum castables

Ultralow-cement bauxite-corundum refractory castables are increasingly attracting attention because of the advantages in performance and cost. To improve its volume stability and high-temperature performance, andalusite and kyanite were incorporated into this type of refractory, respectively, and a comparative investigation of their effects on microstructure, thermo-mechanical properties, and slag corrosion resistance was carried out in this work. The expansion effects induced by the mullitization of these additives not only suppressed the sintering shrinkage but also made the matrix structure more compact and uniform, mainly owing to the generation of many new and strong mullite bonds. This improvement resulted in a significant increase in the refractoriness under load and creep resistance. This effect was far more pronounced for the andalusite-added castables, for which the RUL increased by 62 °C and the creep rate at the stationary stage decreased by 26%. Besides, adverse effects on microstructure and properties appeared when adding a higher amount of kyanite due to the excessive expansion. Moreover, the corrosion mechanisms of these refractory castables by refining slag were discussed, and the active role of andalusite addition in the corrosion resistance was also proposed.     

The influence of inner material with different average thermal conductivity on the performance of whole insulation system for liquid hydrogen on orbit storage

At present, several composite insulation systems were proposed that can be used for passive insulation systems, including foam-variable density multilayer insulation (VDMLI), aerogel-VDMLI and hollow glass microspheres (HGMs)-VDMLI. The passive insulation systems with different inner material (IM) showed different performances. However, the relationship between the average thermal conductivity of IM and the insulation performance of the whole system has rarely been investigated. It is of great significance for efficient configuration and matching of the passive insulation system. In this paper, a series of average thermal conductivity of IM were assumed to predict the insulation performance of the whole system at 20 K–300 K and high vacuum. In order to further illustrate the relationship between IM and MLI/VDMLI, the foam was replaced by the HGMs as 5 mm a unit forming a series of HGMs-foam-MLI/VDMLI insulation systems. The performance of the systems was investigated. After the foam was completely replaced by the HGMs, the performance of MLI and VDMLI systems was improved 33% and 13%, respectively. Moreover, each mode of heat transfer including solid conduction, radiation, and gas conduction for foam-MLI/VDMLI and HGMs-MLI/VDMLI insulation systems were calculated and analyzed.     

UPLC法同时测定阿托伐他汀钙中15个杂质含量

目的建立超高效液相色谱法(UPLC)同时测定阿托伐他汀钙原料药中15个杂质含量的方法。方法采用岛津Shim-pack Velox PFPP(2.1 mm×100 mm,1.8μm)色谱柱,以3.9 g/L醋酸铵缓冲液(pH 5.0):乙腈:甲醇:四氢呋喃(无稳定剂)=67:21:6:6为流动相A,3.9 g/L醋酸铵缓冲液(pH 5.0):乙腈:甲醇:四氢呋喃(无稳定剂)=27:61:6:6为流动相B;梯度洗脱,流速0.43 ml/min,检测波长244 nm,柱温35℃,样品室温度10℃;进样量1.8μl。结果阿托伐他汀钙及各杂质峰间分离良好,在0.3~3μg/ml范围内15个杂质均呈良好的线性关系(r均>0.999,n=6),各杂质平均回收率分别为96.3%,99.1%,99.9%,102.4%,96.4%,99.8%,99.4%,104.9%,106.4%,105.4%,100.1%,98.9%,94.7%,94.4%,101.4%,且不同浓度间平行性良好。15个杂质重复性、进样精密度、中间精密度均良好,48 h内均较稳定。此法除对色谱柱要求较高外,耐用性良好。结论本方法简便、快速、分离度好、专属性强,经方法学验证可用于阿托伐他汀钙原料药杂质质量控制。     

平行流式电机周向水套结构参数对散热性能影响研究

针对电力机车上某功率密度为1.27 kW/kg的平行流式电机周向水套结构的散热问题进行了研究。首先利用热阻网络法建立了平行流多通道截面的热阻数学模型;然后借助FLUENT软件对水套的电机散热过程进行了数值模拟,并对结构参数进行了优化;最后通过实验验证了计算的正确性。结果表明:当通道孔数n增大时,总热阻普遍减小;当通道单孔宽度x增大时,总热阻先增大后减小,当n=6个、x=1.670 mm时,水套具有最佳的散热性能;水套各测温点的数值模拟温度与实验测量温度之间的相对误差均低于5.00%。     

Research on the hydrogen injection strategy of a direct injection natural gas/hydrogen rotary engine considering apex seal leakage

The purpose of the present paper is to investigate the hydrogen injection strategy on the combustion performance of a natural gas/hydrogen rotary engine. Considering that apex seal leakage (ASL) is an inevitable problem in the actual working process of a rotary engine, the action of ASL cannot be ignored for an in-depth study of its combustion performance. Therefore, in this paper, a 3D dynamic simulation model that put the effect of ASL into consideration was established. Furthermore, based on the established 3D model, the combustion process of a natural gas/hydrogen rotary engine under various hydrogen injection angle (HIA) and hydrogen injection timing (HIT) was investigated. The results indicated that the hydrogen jet flow first impacted on the rotor wall after entering the cylinder, and then diffused under the action of the vortexes in the cylinder. Therefore, the HIA and HIT could change the hydrogen distribution by changing the hydrogen impact location and the intensities of the vortexes in the cylinder. In addition, the ideal hydrogen distribution at the ignition timing which could improve the combustion efficiency was given. That is, under the premise of ensuring minimized hydrogen leakage, the hydrogen should mainly distribute in the middle and the front of the cylinder, and a high hydrogen concentration is maintained near the spark plug.     

Investigation on hydrogen-fueled combustion characteristics and thermal performance in a micro heat-recirculation combustor inserted with block

Numerical investigation on the premixed H₂/air combustion in a micro heat-recirculation combustor inserted with/without block is conducted. Effects of block setting, heat-recirculation, and flow rate on combustion characteristics and thermal performance are depicted and analyzed. The results demonstrate that the block enhances the flame stability and preheating effect, which also reduces the heat loss via exhaust gas, while it shortens reactants residence time. The combustor setting with a transverse block gains a better thermal performance than that inserted with a longitudinal block. With the increase of transverse block height, the high-temperature zone is broadened and radiation is improved. However, the block with a height of 10 mm separates the fluid field and weakens the effects of heat recirculation, leading to a lower outer wall temperature. Furthermore, the appropriate block insertion method and height contribute to the significant improvement of heat transfer, radiant efficiency and further optimization of micro power generator.     

Numerical and experimental investigation of a thermosiphon solar water heater system thermal performance used in domestic applications

The thermosiphon is a passive heat exchange method, which circulates a fluid within a system without the need for any electrical or mechanical pumps. The thermosiphon is based on natural convection where the thermal expansion occurs when the temperature difference has a corresponding difference in density across the loop. Thermosiphons are used in different applications such as solar energy collection, automotive systems, and electronics. The current study aims to investigate thermosiphon thermal performance used in domestic applications. The thermal performance of a thermosiphon has been studied by many researchers; however, according to the knowledge of the authors, the influence of the amount of the working fluid on the thermal output has not yet been investigated. Therefore, the influence of the amount of working fluid within the riser pipe has been investigated on the thermal performance of the thermosiphon. In the current study, a computational fluid dynamics model is involved. This model has been validated by comparison with experimental findings. The maximum variation between numerical and experimental results is 14.2% and 11.2% for the working fluid at the inlet and outlet of the absorber pipe, respectively. Furthermore, the results show that the amount of working fluid inside the closed thermosiphon has a great influence on the thermal performance of the system. Additionally, it is found that Case-B, when the amount of working fluid is less than by 10% compared to the traditional model, is the best case among all cases under study. Furthermore, a correlation equation to predict water temperature at the exit of the absorber pipe has been established with an accuracy of 95.05%.     

Mild hydrogen production from the hydrolysis of Al–Bi–Zn composite powder

The development of mild hydrogen-generating materials is of great significance to improve the working life of hydrogen–oxygen fuel cells. In this study, Al–Bi–Zn composite powders were designed by phase diagram calculation and then prepared via the gas atomization method. The results indicated that the conversion yield of Al–12Bi–7Zn (wt.%) powder reached 98% with stable hydrogen production within 280 min at 50 °C. When composite powder reacted with NaCl solution to produce hydrogen, the dormant period of the reaction process was significantly shortened, but the conversion rate was slightly reduced. Additionally, the evolution of powder morphology during the reaction was investigated. The results showed that the continuous cracking of the powder led to the continuous exposure of fresh Al to react.     

Novel cobalt-free Pr2Ni1-xNbxO4 (x = 0, 0.05, 0.10, and 0.15) perovskite as the cathode material for IT-SOFC

The cobalt-free cathode materials with high activity is critical to the commercial application of medium temperature solid oxide fuel cells (IT-SOFC). Herein, a series of cobalt-free Nb-doped Pr₂Ni_1-xNb_xO₄ (x = 0, 0.05, 0.10, and 0.15) perovskite oxides were successfully prepared, and the effects of Nb-doping on the structure, thermal stability and electrochemical properties of the cathode material are studied in detail. The Pr₂Ni_1-xNb_xO₄ exhibits a K₂NiF₄ type structure with Fmmm space group. The Nb⁵⁺ cations that doped into Pr₂NiO₄ replaces the Ni site, which increases the surface oxygen content, then effectively eliminates the phase transition of Pr₂NiO₄ and significantly improves the ORR catalytic activity. The Pr₂Ni_0.9Nb_0.1O₄ was found to occupy the lowest polarization resistance of 0.057 Ω cm², and the peak power density of single cells supported by the electrolyte is 0.576 W cm^?2 at 700 °C, which has good long-term stability.